Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "The usual batch; most of them are DT tweaks to fix misdescribed
  hardware. Beyond that:

   - A bugfix for MMP2 CPU detection, it's been there quite a while but
     makes sense to fix now anyway.

   - Some power management tweaks:
      + disabling of CPU idle power state on Marvell Armada 7K/8K
        (Macchiatobin et al)
      + Increase of minimum voltage on BananaPi M3
      + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX

   - A couple of MAINTAINER updates:
      + MMP has a new volunteer to look after it
      + Mediatek adds a few keywords, IRC channel and wiki URL"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  arm64: dts: mt7622: Drop the general purpose timer node
  arm64: dts: mt7622: fix no more console output on BPI-R64 board
  arm64: dts: mt7622: fix no more console output on rfb1
  ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V

CREDITS

@@ -2541,6 +2541,10 @@ S: Ormond
 S: Victoria 3163
 S: Australia
 
+N: Eric Miao
+E: eric.y.miao@gmail.com
+D: MMP support
+
 N: Pauline Middelink
 E: middelin@polyware.nl
 D: General low-level bug fixes, /proc fixes, identd support
@@ -4115,6 +4119,10 @@ S: 1507 145th Place SE #B5
 S: Bellevue, Washington 98007
 S: USA
 
+N: Haojian Zhuang
+E: haojian.zhuang@gmail.com
+D: MMP support
+
 N: Richard Zidlicky
 E: rz@linux-m68k.org, rdzidlic@geocities.com
 W: http://www.geocities.com/rdzidlic

MAINTAINERS

@@ -1739,13 +1739,17 @@ ARM/Mediatek SoC support
 M:	Matthias Brugger <matthias.bgg@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+W:	https://mtk.bcnfs.org/
+C:	irc://chat.freenode.net/linux-mediatek
 S:	Maintained
 F:	arch/arm/boot/dts/mt6*
 F:	arch/arm/boot/dts/mt7*
 F:	arch/arm/boot/dts/mt8*
 F:	arch/arm/mach-mediatek/
 F:	arch/arm64/boot/dts/mediatek/
+F:	drivers/soc/mediatek/
 N:	mtk
+N:	mt[678]
 K:	mediatek
 
 ARM/Mediatek USB3 PHY DRIVER
@@ -10005,12 +10009,9 @@ S:	Odd Fixes
 F:	drivers/media/radio/radio-miropcm20*
 
 MMP SUPPORT
-M:	Eric Miao <eric.y.miao@gmail.com>
-M:	Haojian Zhuang <haojian.zhuang@gmail.com>
+R:	Lubomir Rintel <lkundrak@v3.sk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/hzhuang1/linux.git
-T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
 

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -45,7 +45,7 @@ memory {
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,7 +53,7 @@ vmmc: fixedregulator@0 {
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/arm-realview-pb11mp.dts

@@ -145,7 +145,7 @@ pmu {
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -153,7 +153,7 @@ vmmc: fixedregulator@0 {
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

@@ -31,7 +31,7 @@ pwr {
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -26,7 +26,7 @@ act {
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -86,13 +86,17 @@ reg_wlan: regulator-wlan {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "slow";
 		regulator-name = "reg_wlan";
 		startup-delay-us = <70000>;
 		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
 };
 
 &adc1 {
@@ -375,6 +379,7 @@ &usdhc2 {
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wlan>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	cap-power-off-card;
 	keep-power-in-suspend;
 	status = "okay";

arch/arm/boot/dts/imx7d-pico.dtsi

@@ -100,6 +100,19 @@ reg_vref_1v8: regulator-vref-1v8 {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
 };
 
 &i2c4 {
@@ -199,12 +212,13 @@ vgen6_reg: vldo4 {
 
 &usdhc2 { /* Wifi SDIO */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
 	no-1-8-v;
 	non-removable;
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_ap6212>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	status = "okay";
 };
 
@@ -301,6 +315,12 @@ MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
 };
 
 &iomuxc_lpsr {
+	pinctrl_wifi_clk: wificlkgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74

arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts

@@ -314,8 +314,8 @@ &reg_dldo1 {
 
 &reg_dldo3 {
 	regulator-always-on;
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-pd";
 };
 

arch/arm/mach-imx/cpuidle-imx6sx.c

@@ -110,7 +110,7 @@ int __init imx6sx_cpuidle_init(void)
 	 * except for power up sw2iso which need to be
 	 * larger than LDO ramp up time.
 	 */
-	imx_gpc_set_arm_power_up_timing(2, 1);
+	imx_gpc_set_arm_power_up_timing(0xf, 1);
 	imx_gpc_set_arm_power_down_timing(1, 1);
 
 	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);

arch/arm/mach-mmp/cputype.h

@@ -44,10 +44,12 @@ static inline int cpu_is_pxa910(void)
 #define cpu_is_pxa910()	(0)
 #endif
 
-#ifdef CONFIG_CPU_MMP2
+#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT)
 static inline int cpu_is_mmp2(void)
 {
-	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58) &&
+		(((mmp_chip_id & 0xfff) == 0x410) ||
+		 ((mmp_chip_id & 0xfff) == 0x610));
 }
 #else
 #define cpu_is_mmp2()	(0)

arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi

@@ -20,28 +20,24 @@ cpu0: cpu@0 {
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x000>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x001>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x100>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x101>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 	};
 };

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -28,33 +28,6 @@ psci {
 		method = "smc";
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle_states {
-			entry_method = "arm,pcsi";
-
-			CPU_SLEEP_0: cpu-sleep-0 {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x0010000>;
-				entry-latency-us = <80>;
-				exit-latency-us  = <160>;
-				min-residency-us = <320>;
-			};
-
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x1010000>;
-				entry-latency-us = <500>;
-				exit-latency-us = <1000>;
-				min-residency-us = <2500>;
-			};
-		};
-	};
-
 	ap806 {
 		#address-cells = <2>;
 		#size-cells = <2>;

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

@@ -16,8 +16,13 @@ / {
 	model = "Bananapi BPI-R64";
 	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 	};
 
 	cpus {

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts

@@ -17,8 +17,13 @@ / {
 	model = "MediaTek MT7622 RFB1 board";
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 	};
 
 	cpus {

arch/arm64/boot/dts/mediatek/mt7622.dtsi

@@ -227,16 +227,6 @@ pericfg: pericfg@10002000 {
 		#reset-cells = <1>;
 	};
 
-	timer: timer@10004000 {
-		compatible = "mediatek,mt7622-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10004000 0 0x80>;
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
-			 <&topckgen CLK_TOP_RTC>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
 	scpsys: scpsys@10006000 {
 		compatible = "mediatek,mt7622-scpsys",
 			     "syscon";