Commit 1e50ceb0 authored by Gene Chen's avatar Gene Chen Committed by Greg Kroah-Hartman

usb: typec: tcpci_rt1711h: Add regulator support when source vbus

Add regulator support when source vbus
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Acked-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: default avatarGene Chen <gene_chen@richtek.com>
Link: https://lore.kernel.org/r/20220805071714.150882-4-gene.chen.richtek@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 3b77b271
......@@ -14,6 +14,7 @@
#include <linux/usb/tcpci.h>
#include <linux/usb/tcpm.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#define RT1711H_VID 0x29CF
#define RT1711H_PID 0x1711
......@@ -41,6 +42,8 @@ struct rt1711h_chip {
struct tcpci_data data;
struct tcpci *tcpci;
struct device *dev;
struct regulator *vbus;
bool src_en;
};
static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
......@@ -104,6 +107,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
/* dcSRC.DRP : 33% */
return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
}
static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
bool src, bool snk)
{
struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
int ret;
if (chip->src_en == src)
return 0;
if (src)
ret = regulator_enable(chip->vbus);
else
ret = regulator_disable(chip->vbus);
if (!ret)
chip->src_en = src;
return ret;
}
static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
......@@ -247,7 +270,12 @@ static int rt1711h_probe(struct i2c_client *client,
if (ret < 0)
return ret;
chip->vbus = devm_regulator_get(&client->dev, "vbus");
if (IS_ERR(chip->vbus))
return PTR_ERR(chip->vbus);
chip->data.init = rt1711h_init;
chip->data.set_vbus = rt1711h_set_vbus;
chip->data.set_vconn = rt1711h_set_vconn;
chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment