Commit 1f0c1314 authored by Lubomir Rintel's avatar Lubomir Rintel Committed by Greg Kroah-Hartman

ARM: dts: pxa*: Don't redeclare phandle references

Extend the nodes by their phandle references instead of recreating the
tree and declaring references of the same names.
Signed-off-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-2-lkundrak@v3.skSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c97c65f3
......@@ -18,18 +18,16 @@ chosen {
memory {
reg = <0x00000000 0x04000000>;
};
};
soc {
apb@d4000000 {
uart1: uart@d4017000 {
status = "okay";
};
twsi1: i2c@d4011000 {
status = "okay";
};
rtc: rtc@d4010000 {
status = "okay";
};
};
};
&uart1 {
status = "okay";
};
&twsi1 {
status = "okay";
};
&rtc {
status = "okay";
};
......@@ -18,155 +18,153 @@ chosen {
memory {
reg = <0x00000000 0x10000000>;
};
};
soc {
apb@d4000000 {
uart1: uart@d4017000 {
status = "okay";
};
twsi1: i2c@d4011000 {
status = "okay";
&uart1 {
status = "okay";
};
&twsi1 {
status = "okay";
pmic: 88pm860x@34 {
compatible = "marvell,88pm860x";
reg = <0x34>;
interrupts = <4>;
interrupt-parent = <&intc>;
interrupt-controller;
#interrupt-cells = <1>;
pmic: 88pm860x@34 {
compatible = "marvell,88pm860x";
reg = <0x34>;
interrupts = <4>;
interrupt-parent = <&intc>;
interrupt-controller;
#interrupt-cells = <1>;
marvell,88pm860x-irq-read-clr;
marvell,88pm860x-slave-addr = <0x11>;
marvell,88pm860x-irq-read-clr;
marvell,88pm860x-slave-addr = <0x11>;
regulators {
BUCK1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
BUCK2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
BUCK3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2800000>;
regulator-boot-on;
regulator-always-on;
};
LDO2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO5 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
regulator-always-on;
};
LDO8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
regulator-always-on;
};
LDO9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO10 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO13 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
rtc {
marvell,88pm860x-vrtc = <1>;
};
touch {
marvell,88pm860x-gpadc-prebias = <1>;
marvell,88pm860x-gpadc-slot-cycle = <1>;
marvell,88pm860x-tsi-prebias = <6>;
marvell,88pm860x-pen-prebias = <16>;
marvell,88pm860x-pen-prechg = <2>;
marvell,88pm860x-resistor-X = <300>;
};
backlights {
backlight-0 {
marvell,88pm860x-iset = <4>;
marvell,88pm860x-pwm = <3>;
};
backlight-2 {
};
};
leds {
led0-red {
marvell,88pm860x-iset = <12>;
};
led0-green {
marvell,88pm860x-iset = <12>;
};
led0-blue {
marvell,88pm860x-iset = <12>;
};
};
};
};
rtc: rtc@d4010000 {
status = "okay";
regulators {
BUCK1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
BUCK2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
BUCK3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2800000>;
regulator-boot-on;
regulator-always-on;
};
LDO2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO5 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
regulator-always-on;
};
LDO8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
regulator-always-on;
};
LDO9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO10 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO13 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
rtc {
marvell,88pm860x-vrtc = <1>;
};
touch {
marvell,88pm860x-gpadc-prebias = <1>;
marvell,88pm860x-gpadc-slot-cycle = <1>;
marvell,88pm860x-tsi-prebias = <6>;
marvell,88pm860x-pen-prebias = <16>;
marvell,88pm860x-pen-prechg = <2>;
marvell,88pm860x-resistor-X = <300>;
};
backlights {
backlight-0 {
marvell,88pm860x-iset = <4>;
marvell,88pm860x-pwm = <3>;
};
backlight-2 {
};
};
leds {
led0-red {
marvell,88pm860x-iset = <12>;
};
led0-green {
marvell,88pm860x-iset = <12>;
};
led0-blue {
marvell,88pm860x-iset = <12>;
};
};
};
};
&rtc {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment