Commit 1f1b20f1 authored by Jes Sorensen's avatar Jes Sorensen Committed by Kalle Valo

rtl8xxxu: Do queue init in same order as 8723bu vendor driver

Reorganize the init sequence in order to be able to compare to the
8723bu vendor driver's init sequence.
Signed-off-by: default avatarJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent f30ed675
...@@ -6017,32 +6017,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) ...@@ -6017,32 +6017,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
val8 &= 0xf8; val8 &= 0xf8;
rtl8xxxu_write8(priv, 0xa3, val8); rtl8xxxu_write8(priv, 0xa3, val8);
} }
if (priv->ep_tx_normal_queue)
val8 = TX_PAGE_NUM_NORM_PQ;
else
val8 = 0;
rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8);
val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD;
if (priv->ep_tx_high_queue)
val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT);
if (priv->ep_tx_low_queue)
val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT);
rtl8xxxu_write32(priv, REG_RQPN, val32);
/*
* Set TX buffer boundary
*/
val8 = TX_TOTAL_PAGE_NUM + 1;
rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8);
rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8);
rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
} }
ret = rtl8xxxu_download_firmware(priv); ret = rtl8xxxu_download_firmware(priv);
...@@ -6054,11 +6028,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) ...@@ -6054,11 +6028,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
if (ret) if (ret)
goto exit; goto exit;
ret = rtl8xxxu_init_queue_priority(priv);
dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
if (ret)
goto exit;
/* Fix USB interface interference issue */ /* Fix USB interface interference issue */
if (priv->rtlchip == 0x8723a) { if (priv->rtlchip == 0x8723a) {
rtl8xxxu_write8(priv, 0xfe40, 0xe0); rtl8xxxu_write8(priv, 0xfe40, 0xe0);
...@@ -6158,6 +6127,43 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) ...@@ -6158,6 +6127,43 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
} }
if (!macpower){
if (priv->ep_tx_normal_queue)
val8 = TX_PAGE_NUM_NORM_PQ;
else
val8 = 0;
rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8);
val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD;
if (priv->ep_tx_high_queue)
val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT);
if (priv->ep_tx_low_queue)
val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT);
rtl8xxxu_write32(priv, REG_RQPN, val32);
/*
* Set TX buffer boundary
*/
val8 = TX_TOTAL_PAGE_NUM + 1;
if (priv->rtlchip == 0x8723b)
val8 -= 1;
rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8);
rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8);
rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
}
ret = rtl8xxxu_init_queue_priority(priv);
dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
if (ret)
goto exit;
/* RFSW Control - clear bit 14 ?? */ /* RFSW Control - clear bit 14 ?? */
rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003); rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003);
/* 0x07000760 */ /* 0x07000760 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment