ARM: Kirkwood: Convert TS219 to pinctrl.

Make use of the pinctrl driver for configuring all the pins, instead
of using the Orion mpp code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-ts219-6281.dts

 /dts-v1/;
 
 /include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+				      &pmx_twsi0 &pmx_sata0 &pmx_sata1
+				      &pmx_ram_size &pmx_reset_button
+				      &pmx_USB_copy_button &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;

arch/arm/boot/dts/kirkwood-ts219-6282.dts

 /dts-v1/;
 
 /include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6282.dtsi"
 
 / {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+				      &pmx_twsi0 &pmx_sata0 &pmx_sata1
+				      &pmx_ram_size &pmx_reset_button
+				      &pmx_USB_copy_button &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;

arch/arm/mach-kirkwood/board-ts219.c

@@ -26,41 +26,16 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
-#include "mpp.h"
 #include "tsx1x-common.h"
 
 static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_SATA1_ACTn,
-	MPP5_SATA0_ACTn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_UART1_TXD,	/* PIC controller */
-	MPP14_UART1_RXD,	/* PIC controller */
-	MPP15_GPIO,		/* USB Copy button (on devices with 88F6281) */
-	MPP16_GPIO,		/* Reset button (on devices with 88F6281) */
-	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
-	MPP37_GPIO,		/* Reset button (on devices with 88F6282) */
-	MPP43_GPIO,		/* USB Copy button (on devices with 88F6282) */
-	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
-	0
-};
-
 void __init qnap_dt_ts219_init(void)
 {
 	u32 dev, rev;
 
-	kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
 	kirkwood_pcie_id(&dev, &rev);
 	if (dev == MV88F6282_DEV_ID)
 		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);