ARM: davinci: Use GPIO lookup table for DA850 LEDs

This switches the DA850 board to use a GPIO lookup table to
look up the GPIO LEDs. Thanks to the offset handling when
we define GPIOs as an offset into the chip, we can drop
some complex code.
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/board-da850-evm.c

@@ -631,13 +631,12 @@ static void da850_evm_bb_keys_init(unsigned gpio)
 	}
 }
 
-#define DA850_N_BB_USER_LED	2
-
 static struct gpio_led da850_evm_bb_leds[] = {
-	[0 ... DA850_N_BB_USER_LED - 1] = {
-		.active_low = 1,
-		.gpio = -1, /* assigned at runtime */
-		.name = NULL, /* assigned at runtime */
+	{
+		.name = "user_led2",
+	},
+	{
+		.name = "user_led1",
 	},
 };
 
@@ -646,6 +645,20 @@ static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
 	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
 };
 
+static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("i2c-bb-expander",
+				DA850_EVM_BB_EXP_USER_LED2, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("i2c-bb-expander",
+				DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
+				1, GPIO_ACTIVE_LOW),
+
+		{ },
+	},
+};
+
 static struct platform_device da850_evm_bb_leds_device = {
 	.name		= "leds-gpio",
 	.id		= -1,
@@ -654,20 +667,6 @@ static struct platform_device da850_evm_bb_leds_device = {
 	}
 };
 
-static void da850_evm_bb_leds_init(unsigned gpio)
-{
-	int i;
-	struct gpio_led *led;
-
-	for (i = 0; i < DA850_N_BB_USER_LED; i++) {
-		led = &da850_evm_bb_leds[i];
-
-		led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
-		led->name =
-			da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
-	}
-}
-
 static int da850_evm_bb_expander_setup(struct i2c_client *client,
 						unsigned gpio, unsigned ngpio,
 						void *c)
@@ -685,7 +684,7 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
 		goto io_exp_setup_sw_fail;
 	}
 
-	da850_evm_bb_leds_init(gpio);
+	gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
 	ret = platform_device_register(&da850_evm_bb_leds_device);
 	if (ret) {
 		pr_warn("Could not register baseboard GPIO expander LEDs");
@@ -729,10 +728,12 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 	},
 	{
 		I2C_BOARD_INFO("tca6416", 0x20),
+		.dev_name = "ui-expander",
 		.platform_data = &da850_evm_ui_expander_info,
 	},
 	{
 		I2C_BOARD_INFO("tca6416", 0x21),
+		.dev_name = "bb-expander",
 		.platform_data = &da850_evm_bb_expander_info,
 	},
 };