Merge branch 'pci/dt-bindings'

- Drop minItems and maxItems from ranges in PCI generic host binding since
  host bridges may have several MMIO and I/O port apertures (Frank Li)

- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
  clocks (Krzysztof Kozlowski)

- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
  fsl,lx2160ar2-pcie (Frank Li)

- Add layerscape-pcie DT binding deprecated 'num-viewport' property to
  address a DT checker warning (Frank Li)

- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank
  Li)

- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari)

- Convert altera DT bindings from text to YAML (Matthew Gerlach)

- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard
  Zhu)

- Add back qcom 'vddpe-3v3-supply', which was incorrectly removed earlier
  (Johan Hovold)

* pci/dt-bindings:
  dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
  dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  dt-bindings: PCI: altera: msi: Convert to YAML
  dt-bindings: PCI: altera: Convert to YAML
  dt-bindings: PCI: qcom,pcie-sc7280: Update bindings adding eight interrupts
  dt-bindings: PCI: layerscape-pci: Change property 'fsl,pcie-scfg' type
  dt-bindings: PCI: layerscape-pci: Add deprecated property 'num-viewport'
  dt-bindings: PCI: layerscape-pci: Replace fsl,lx2160a-pcie with fsl,lx2160ar2-pcie
  dt-bindings: PCI: socionext,uniphier-pcie-ep: Add top-level constraints
  dt-bindings: PCI: renesas,pci-rcar-gen2: Add top-level constraints
  dt-bindings: PCI: hisilicon,kirin-pcie: Add top-level constraints
  dt-bindings: PCI: host-generic-pci: Drop minItems and maxItems of ranges

Documentation/devicetree/bindings/pci/altera-pcie-msi.txt

-* Altera PCIe MSI controller
-
-Required properties:
-- compatible:	should contain "altr,msi-1.0"
-- reg:		specifies the physical base address of the controller and
-		the length of the memory mapped region.
-- reg-names:	must include the following entries:
-		"csr": CSR registers
-		"vector_slave": vectors slave port region
-- interrupts:	specifies the interrupt source of the parent interrupt
-		controller. The format of the interrupt specifier depends on the
-		parent interrupt controller.
-- num-vectors:	number of vectors, range 1 to 32.
-- msi-controller:	indicates that this is MSI controller node
-
-
-Example
-msi0: msi@0xFF200000 {
-	compatible = "altr,msi-1.0";
-	reg = <0xFF200000 0x00000010
-		0xFF200010 0x00000080>;
-	reg-names = "csr", "vector_slave";
-	interrupt-parent = <&hps_0_arm_gic_0>;
-	interrupts = <0 42 4>;
-	msi-controller;
-	num-vectors = <32>;
-};

Documentation/devicetree/bindings/pci/altera-pcie.txt

-* Altera PCIe controller
-
-Required properties:
-- compatible :	should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
-- reg:		a list of physical base address and length for TXS and CRA.
-		For "altr,pcie-root-port-2.0", additional HIP base address and length.
-- reg-names:	must include the following entries:
-		"Txs": TX slave port region
-		"Cra": Control register access region
-		"Hip": Hard IP region (if "altr,pcie-root-port-2.0")
-- interrupts:	specifies the interrupt source of the parent interrupt
-		controller.  The format of the interrupt specifier depends
-		on the parent interrupt controller.
-- device_type:	must be "pci"
-- #address-cells:	set to <3>
-- #size-cells:		set to <2>
-- #interrupt-cells:	set to <1>
-- ranges:	describes the translation of addresses for root ports and
-		standard PCI regions.
-- interrupt-map-mask and interrupt-map: standard PCI properties to define the
-		mapping of the PCIe interface to interrupt numbers.
-
-Optional properties:
-- msi-parent:	Link to the hardware entity that serves as the MSI controller
-		for this PCIe controller.
-- bus-range:	PCI bus numbers covered
-
-Example
-	pcie_0: pcie@c00000000 {
-		compatible = "altr,pcie-root-port-1.0";
-		reg = <0xc0000000 0x20000000>,
-			<0xff220000 0x00004000>;
-		reg-names = "Txs", "Cra";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 40 4>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		bus-range = <0x0 0xFF>;
-		device_type = "pci";
-		msi-parent = <&msi_to_gic_gen_0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_0 1>,
-			            <0 0 0 2 &pcie_0 2>,
-			            <0 0 0 3 &pcie_0 3>,
-			            <0 0 0 4 &pcie_0 4>;
-		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
-			  0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
-	};

Documentation/devicetree/bindings/pci/altr,msi-controller.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2015, 2024, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/altr,msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera PCIe MSI controller
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - altr,msi-1.0
+
+  reg:
+    items:
+      - description: CSR registers
+      - description: Vectors slave port region
+
+  reg-names:
+    items:
+      - const: csr
+      - const: vector_slave
+
+  interrupts:
+    maxItems: 1
+
+  msi-controller: true
+
+  num-vectors:
+    description: number of vectors
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - msi-controller
+  - num-vectors
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    msi@ff200000 {
+        compatible = "altr,msi-1.0";
+        reg = <0xff200000 0x00000010>,
+              <0xff200010 0x00000080>;
+        reg-names = "csr", "vector_slave";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+        msi-controller;
+        num-vectors = <32>;
+    };

Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2015, 2019, 2024, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/altr,pcie-root-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera PCIe Root Port
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - altr,pcie-root-port-1.0
+      - altr,pcie-root-port-2.0
+
+  reg:
+    items:
+      - description: TX slave port region
+      - description: Control register access region
+      - description: Hard IP region
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: Txs
+      - const: Cra
+      - const: Hip
+    minItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  interrupt-map:
+    maxItems: 4
+
+  "#interrupt-cells":
+    const: 1
+
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - interrupt-map
+  - interrupt-map-mask
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - altr,pcie-root-port-1.0
+    then:
+      properties:
+        reg:
+          maxItems: 2
+
+        reg-names:
+          maxItems: 2
+
+    else:
+      properties:
+        reg:
+          minItems: 3
+
+        reg-names:
+          minItems: 3
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pcie_0: pcie@c00000000 {
+        compatible = "altr,pcie-root-port-1.0";
+        reg = <0xc0000000 0x20000000>,
+              <0xff220000 0x00004000>;
+        reg-names = "Txs", "Cra";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        msi-parent = <&msi_to_gic_gen_0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &pcie_0 0 0 0 1>,
+                        <0 0 0 2 &pcie_0 0 0 0 2>,
+                        <0 0 0 3 &pcie_0 0 0 0 3>,
+                        <0 0 0 4 &pcie_0 0 0 0 4>;
+        ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000>,
+                 <0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+    };

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml

@@ -65,12 +65,14 @@ allOf:
     then:
       properties:
         reg:
-          minItems: 2
-          maxItems: 2
+          minItems: 4
+          maxItems: 4
         reg-names:
           items:
             - const: dbi
             - const: addr_space
+            - const: dbi2
+            - const: atu
 
   - if:
       properties:
@@ -129,8 +131,11 @@ examples:
 
     pcie_ep: pcie-ep@33800000 {
       compatible = "fsl,imx8mp-pcie-ep";
-      reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
-      reg-names = "dbi", "addr_space";
+      reg = <0x33800000 0x100000>,
+            <0x18000000 0x8000000>,
+            <0x33900000 0x100000>,
+            <0x33b00000 0x100000>;
+      reg-names = "dbi", "addr_space", "dbi2", "atu";
       clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
                <&clk IMX8MP_CLK_HSIO_AXI>,
                <&clk IMX8MP_CLK_PCIE_ROOT>;

Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml

@@ -22,18 +22,20 @@ description:
 
 properties:
   compatible:
-    enum:
-      - fsl,ls1021a-pcie
-      - fsl,ls2080a-pcie
-      - fsl,ls2085a-pcie
-      - fsl,ls2088a-pcie
-      - fsl,ls1088a-pcie
-      - fsl,ls1046a-pcie
-      - fsl,ls1043a-pcie
-      - fsl,ls1012a-pcie
-      - fsl,ls1028a-pcie
-      - fsl,lx2160a-pcie
-
+    oneOf:
+      - enum:
+          - fsl,ls1012a-pcie
+          - fsl,ls1021a-pcie
+          - fsl,ls1028a-pcie
+          - fsl,ls1043a-pcie
+          - fsl,ls1046a-pcie
+          - fsl,ls1088a-pcie
+          - fsl,ls2080a-pcie
+          - fsl,ls2085a-pcie
+          - fsl,ls2088a-pcie
+      - items:
+          - const: fsl,lx2160ar2-pcie
+          - const: fsl,ls2088a-pcie
   reg:
     maxItems: 2
 
@@ -43,10 +45,15 @@ properties:
       - const: config
 
   fsl,pcie-scfg:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description: A phandle to the SCFG device node. The second entry is the
       physical PCIe controller index starting from '0'. This is used to get
       SCFG PEXN registers.
+    items:
+      items:
+        - description: A phandle to the SCFG device node
+        - description: PCIe controller index starting from '0'
+    maxItems: 1
 
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -67,6 +74,14 @@ properties:
     minItems: 1
     maxItems: 2
 
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound view ports configured in hardware. It's the same as
+      the number of outbound AT windows.
+    maximum: 256
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml

@@ -37,7 +37,8 @@ properties:
     minItems: 3
     maxItems: 4
 
-  clocks: true
+  clocks:
+    maxItems: 5
 
   clock-names:
     items:

Documentation/devicetree/bindings/pci/host-generic-pci.yaml

@@ -102,8 +102,6 @@ properties:
       As described in IEEE Std 1275-1994, but must provide at least a
       definition of non-prefetchable memory. One or both of prefetchable Memory
       and IO Space may also be provided.
-    minItems: 1
-    maxItems: 3
 
   dma-coherent: true
   iommu-map: true

Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml

@@ -78,6 +78,9 @@ properties:
     description: GPIO controlled connection to WAKE# signal
     maxItems: 1
 
+  vddpe-3v3-supply:
+    description: PCIe endpoint power supply
+
 required:
   - reg
   - reg-names

Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml

@@ -53,11 +53,19 @@ properties:
       - const: aggre1 # Aggre NoC PCIe1 AXI clock
 
   interrupts:
-    maxItems: 1
+    minItems: 8
+    maxItems: 8
 
   interrupt-names:
     items:
-      - const: msi
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
 
   resets:
     maxItems: 1
@@ -66,9 +74,6 @@ properties:
     items:
       - const: pci
 
-  vddpe-3v3-supply:
-    description: PCIe endpoint power supply
-
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
@@ -137,8 +142,16 @@ examples:
 
             dma-coherent;
 
-            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "msi";
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,

Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml

@@ -58,9 +58,6 @@ properties:
     items:
       - const: pci
 
-  vddpe-3v3-supply:
-    description: A phandle to the PCIe endpoint power supply
-
 required:
   - interconnects
   - interconnect-names

Documentation/devicetree/bindings/pci/qcom,pcie.yaml

@@ -91,6 +91,9 @@ properties:
   vdda_refclk-supply:
     description: A phandle to the core analog power supply for IC which generates reference clock
 
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
   phys:
     maxItems: 1
 

Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml

@@ -42,9 +42,13 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks: true
+  clocks:
+    minItems: 1
+    maxItems: 3
 
-  clock-names: true
+  clock-names:
+    minItems: 1
+    maxItems: 3
 
   resets:
     maxItems: 1

Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml

@@ -38,13 +38,17 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names: true
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names: true
+  reset-names:
+    minItems: 1
+    maxItems: 2
 
   num-ib-windows:
     const: 16

MAINTAINERS

@@ -17372,7 +17372,7 @@ PCI DRIVER FOR ALTERA PCIE IP
 M:	Joyce Ooi <joyce.ooi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/pci/altera-pcie.txt
+F:	Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
 F:	drivers/pci/controller/pcie-altera.c
 
 PCI DRIVER FOR APPLIEDMICRO XGENE
@@ -17602,7 +17602,7 @@ PCI MSI DRIVER FOR ALTERA MSI IP
 M:	Joyce Ooi <joyce.ooi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
+F:	Documentation/devicetree/bindings/pci/altr,msi-controller.yaml
 F:	drivers/pci/controller/pcie-altera-msi.c
 
 PCI MSI DRIVER FOR APPLIEDMICRO XGENE