arm64: dts: ti: k3-am62p: use eFuse MAC Address for CPSW3G Port 1

Add the "ethernet-mac-syscon" node within "wkup_conf" node corresponding to
the CTRLMMR_MAC_IDx registers within the CTRL_MMR space. Assign the
compatible "ti,am62p-cpsw-mac-efuse" to enable "syscon_regmap" operations
on these registers. The MAC Address programmed in the eFuse is accessible
through the CTRLMMR_MAC_IDx registers. The "ti,syscon-efuse" device-tree
property points to the CTRLMMR_MAC_IDx registers, allowing the CPSW driver
to fetch the MAC Address and assign it to the network interface associated
with CPSW3G MAC Port 1.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240604104425.3770037-1-s-vadapalli@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-am62p-main.dtsi

@@ -749,6 +749,7 @@ cpsw_port1: port@1 {
 				label = "port1";
 				phys = <&phy_gmii_sel 1>;
 				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				status = "disabled";
 			};
 

arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi

@@ -19,6 +19,11 @@ chipid: chipid@14 {
 			bootph-all;
 		};
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		usb0_phy_ctrl: syscon@4008 {
 			compatible = "ti,am62-usb-phy-ctrl", "syscon";
 			reg = <0x4008 0x4>;