Commit 21658d51 authored by Marc Kleine-Budde's avatar Marc Kleine-Budde Committed by Shawn Guo

ARM: dts: imx: Change flexcan node name to "can"

Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with
yaml schema, it requires the nodename to be "can". This fixes the following
error found by dtbs_check:

arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$'
    From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 1186a522
......@@ -546,7 +546,7 @@ pwm4: pwm@208c000 {
status = "disabled";
};
can1: flexcan@2090000 {
can1: can@2090000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
......@@ -557,7 +557,7 @@ can1: flexcan@2090000 {
status = "disabled";
};
can2: flexcan@2094000 {
can2: can@2094000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -425,7 +425,7 @@ pwm4: pwm@208c000 {
status = "disabled";
};
can1: flexcan@2090000 {
can1: can@2090000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
......@@ -436,7 +436,7 @@ can1: flexcan@2090000 {
status = "disabled";
};
can2: flexcan@2094000 {
can2: can@2094000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -95,7 +95,7 @@ edma0: dma-controller@40018000 {
status = "disabled";
};
can0: flexcan@40020000 {
can0: can@40020000 {
compatible = "fsl,vf610-flexcan";
reg = <0x40020000 0x4000>;
interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
......@@ -681,7 +681,7 @@ fec1: ethernet@400d1000 {
status = "disabled";
};
can1: flexcan@400d4000 {
can1: can@400d4000 {
compatible = "fsl,vf610-flexcan";
reg = <0x400d4000 0x4000>;
interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment