m68k: remove the dead PCI code

This patch removes the no longer used m68k PCI code.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/m68k/Kconfig

@@ -122,10 +122,6 @@ config ATARI
 	  this kernel on an Atari, say Y here and browse the material
 	  available in <file:Documentation/m68k>; otherwise say N.
 
-config PCI
-	bool
-	help
-
 config MAC
 	bool "Macintosh support"
 	select MMU_MOTOROLA if MMU

arch/m68k/kernel/Makefile

@@ -14,5 +14,4 @@ obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
 
 devres-y = ../../../kernel/irq/devres.o
 
-obj-$(CONFIG_PCI)	+= bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo

include/asm-m68k/dma.h

@@ -11,10 +11,6 @@
 extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
 extern void free_dma(unsigned int dmanr);	/* release it again */
 
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
 #define isa_dma_bridge_buggy    (0)
-#endif
 
 #endif /* _M68K_DMA_H */

include/asm-m68k/io.h

@@ -7,15 +7,12 @@
  *            - added skeleton for GG-II and Amiga PCMCIA
  * 2/3/01 RZ: - moved a few more defs into raw_io.h
  *
- * inX/outX/readX/writeX should not be used by any driver unless it does
- * ISA or PCI access. Other drivers should use function defined in raw_io.h
+ * inX/outX should not be used by any driver unless it does
+ * ISA access. Other drivers should use function defined in raw_io.h
  * or define its own macros on top of these.
  *
- *    inX(),outX()              are for PCI and ISA I/O
- *    readX(),writeX()          are for PCI memory
+ *    inX(),outX()              are for ISA I/O
  *    isa_readX(),isa_writeX()  are for ISA memory
- *
- * moved mem{cpy,set}_*io inside CONFIG_PCI
  */
 
 #ifndef _IO_H
@@ -256,10 +253,7 @@ static inline void isa_delay(void)
        (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) :  \
                   raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
 
-#endif  /* CONFIG_ISA */
-
 
-#if defined(CONFIG_ISA) && !defined(CONFIG_PCI)
 #define inb     isa_inb
 #define inb_p   isa_inb_p
 #define outb    isa_outb
@@ -282,55 +276,9 @@ static inline void isa_delay(void)
 #define readw   isa_readw
 #define writeb  isa_writeb
 #define writew  isa_writew
-#endif /* CONFIG_ISA */
-
-#if defined(CONFIG_PCI)
-
-#define readl(addr)      in_le32(addr)
-#define writel(val,addr) out_le32((addr),(val))
-
-/* those can be defined for both ISA and PCI - it won't work though */
-#define readb(addr)       in_8(addr)
-#define readw(addr)       in_le16(addr)
-#define writeb(val,addr)  out_8((addr),(val))
-#define writew(val,addr)  out_le16((addr),(val))
 
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+#else  /* CONFIG_ISA */
 
-#ifndef CONFIG_ISA
-#define inb(port)      in_8(port)
-#define outb(val,port) out_8((port),(val))
-#define inw(port)      in_le16(port)
-#define outw(val,port) out_le16((port),(val))
-#define inl(port)      in_le32(port)
-#define outl(val,port) out_le32((port),(val))
-
-#else
-/*
- * kernel with both ISA and PCI compiled in, those have
- * conflicting defs for in/out. Simply consider port < 1024
- * ISA and everything else PCI. read,write not defined
- * in this case
- */
-#define inb(port) ((port)<1024 ? isa_inb(port) : in_8(port))
-#define inb_p(port) ((port)<1024 ? isa_inb_p(port) : in_8(port))
-#define inw(port) ((port)<1024 ? isa_inw(port) : in_le16(port))
-#define inw_p(port) ((port)<1024 ? isa_inw_p(port) : in_le16(port))
-#define inl(port) ((port)<1024 ? isa_inl(port) : in_le32(port))
-#define inl_p(port) ((port)<1024 ? isa_inl_p(port) : in_le32(port))
-
-#define outb(val,port) ((port)<1024 ? isa_outb((val),(port)) : out_8((port),(val)))
-#define outb_p(val,port) ((port)<1024 ? isa_outb_p((val),(port)) : out_8((port),(val)))
-#define outw(val,port) ((port)<1024 ? isa_outw((val),(port)) : out_le16((port),(val)))
-#define outw_p(val,port) ((port)<1024 ? isa_outw_p((val),(port)) : out_le16((port),(val)))
-#define outl(val,port) ((port)<1024 ? isa_outl((val),(port)) : out_le32((port),(val)))
-#define outl_p(val,port) ((port)<1024 ? isa_outl_p((val),(port)) : out_le32((port),(val)))
-#endif
-#endif /* CONFIG_PCI */
-
-#if !defined(CONFIG_ISA) && !defined(CONFIG_PCI)
 /*
  * We need to define dummy functions for GENERIC_IOMAP support.
  */
@@ -357,11 +305,11 @@ static inline void isa_delay(void)
 #define writeb(val,addr) out_8((addr),(val))
 #define readw(addr)      in_le16(addr)
 #define writew(val,addr) out_le16((addr),(val))
-#endif
-#if !defined(CONFIG_PCI)
+
+#endif /* CONFIG_ISA */
+
 #define readl(addr)      in_le32(addr)
 #define writel(val,addr) out_le32((addr),(val))
-#endif
 
 #define mmiowb()
 

include/asm-m68k/pci.h

 #ifndef _ASM_M68K_PCI_H
 #define _ASM_M68K_PCI_H
 
-/*
- * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
- *
- * Written by Wout Klaren.
- */
-
-#include <asm/scatterlist.h>
 #include <asm-generic/pci-dma-compat.h>
 
-struct pci_ops;
-
-/*
- * Structure with hardware dependent information and functions of the
- * PCI bus.
- */
-
-struct pci_bus_info
-{
-	/*
-	 * Resources of the PCI bus.
-	 */
-
-	struct resource mem_space;
-	struct resource io_space;
-
-	/*
-	 * System dependent functions.
-	 */
-
-	struct pci_ops *m68k_pci_ops;
-
-	void (*fixup)(int pci_modify);
-	void (*conf_device)(struct pci_dev *dev);
-};
-
-#define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
 /* The PCI address space does equal the physical memory
  * address space.  The networking and block device layers use
  * this boolean for bounce buffer decisions.