Commit 21871d7e authored by Clark Williams's avatar Clark Williams Committed by Paul E. McKenney

rcu: Unify boost and kthread priorities

Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
threads (rcub/n).

Also, create the module_parameter rcutree.kthread_prio to be used on
the kernel command line at boot to set a new value (rcutree.kthread_prio=N).
Signed-off-by: default avatarClark Williams <clark.williams@gmail.com>
[ paulmck: Ported to rcu/dev, applied Paul Bolle and Peter Zijlstra feedback. ]
Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
parent e0775cef
......@@ -2922,6 +2922,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
quiescent states. Units are jiffies, minimum
value is one, and maximum value is HZ.
rcutree.kthread_prio= [KNL,BOOT]
Set the SCHED_FIFO priority of the RCU
per-CPU kthreads (rcuc/N). This value is also
used for the priority of the RCU boost threads
(rcub/N). Valid values are 1-99 and the default
is 1 (the least-favored priority).
rcutree.rcu_nocb_leader_stride= [KNL]
Set the number of NOCB kthread groups, which
defaults to the square root of the number of
......
......@@ -672,30 +672,31 @@ config RCU_BOOST
Say Y here if you are working with real-time apps or heavy loads
Say N here if you are unsure.
config RCU_BOOST_PRIO
int "Real-time priority to boost RCU readers to"
config RCU_KTHREAD_PRIO
int "Real-time priority to use for RCU worker threads"
range 1 99
depends on RCU_BOOST
default 1
help
This option specifies the real-time priority to which long-term
preempted RCU readers are to be boosted. If you are working
with a real-time application that has one or more CPU-bound
threads running at a real-time priority level, you should set
RCU_BOOST_PRIO to a priority higher then the highest-priority
real-time CPU-bound thread. The default RCU_BOOST_PRIO value
of 1 is appropriate in the common case, which is real-time
This option specifies the SCHED_FIFO priority value that will be
assigned to the rcuc/n and rcub/n threads and is also the value
used for RCU_BOOST (if enabled). If you are working with a
real-time application that has one or more CPU-bound threads
running at a real-time priority level, you should set
RCU_KTHREAD_PRIO to a priority higher than the highest-priority
real-time CPU-bound application thread. The default RCU_KTHREAD_PRIO
value of 1 is appropriate in the common case, which is real-time
applications that do not have any CPU-bound threads.
Some real-time applications might not have a single real-time
thread that saturates a given CPU, but instead might have
multiple real-time threads that, taken together, fully utilize
that CPU. In this case, you should set RCU_BOOST_PRIO to
that CPU. In this case, you should set RCU_KTHREAD_PRIO to
a priority higher than the lowest-priority thread that is
conspiring to prevent the CPU from running any non-real-time
tasks. For example, if one thread at priority 10 and another
thread at priority 5 are between themselves fully consuming
the CPU time on a given CPU, then RCU_BOOST_PRIO should be
the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
set to priority 6 or higher.
Specify the real-time priority, or take the default if unsure.
......
......@@ -30,12 +30,13 @@
#include <linux/smpboot.h>
#include "../time/tick-internal.h"
#define RCU_KTHREAD_PRIO 1
#ifdef CONFIG_RCU_BOOST
#include "../locking/rtmutex_common.h"
#define RCU_BOOST_PRIO CONFIG_RCU_BOOST_PRIO
/* rcuc/rcub kthread realtime priority */
static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
module_param(kthread_prio, int, 0644);
/*
* Control variables for per-CPU and per-rcu_node kthreads. These
......@@ -46,11 +47,7 @@ DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
DEFINE_PER_CPU(char, rcu_cpu_has_work);
#else /* #ifdef CONFIG_RCU_BOOST */
#define RCU_BOOST_PRIO RCU_KTHREAD_PRIO
#endif /* #else #ifdef CONFIG_RCU_BOOST */
#endif /* #ifdef CONFIG_RCU_BOOST */
#ifdef CONFIG_RCU_NOCB_CPU
static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */
......@@ -98,6 +95,9 @@ static void __init rcu_bootup_announce_oddness(void)
pr_info("\tBoot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
#ifdef CONFIG_RCU_BOOST
pr_info("\tRCU kthread priority: %d.\n", kthread_prio);
#endif
}
#ifdef CONFIG_TREE_PREEMPT_RCU
......@@ -1339,7 +1339,7 @@ static int rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
smp_mb__after_unlock_lock();
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = RCU_BOOST_PRIO;
sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
......@@ -1356,7 +1356,7 @@ static void rcu_cpu_kthread_setup(unsigned int cpu)
{
struct sched_param sp;
sp.sched_priority = RCU_KTHREAD_PRIO;
sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
}
......
......@@ -17,5 +17,5 @@ CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=2
CONFIG_RCU_KTHREAD_PRIO=2
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
......@@ -15,8 +15,8 @@ CONFIG_PREEMPT -- Do half. (First three and #8.)
CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not.
CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING.
CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU.
CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing.
CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE.
CONFIG_RCU_KTHREAD_PRIO -- set to 2 for _BOOST testing.
CONFIG_RCU_CPU_STALL_INFO -- Do one.
CONFIG_RCU_CPU_STALL_VERBOSE -- do one with and without _INFO.
CONFIG_RCU_FANOUT -- Cover hierarchy as currently, but overlap with others.
CONFIG_RCU_FANOUT_EXACT -- Do one.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment