Merge tag 'at91-cleanup2' into at91-4.1-multiplatform

Second batch of cleanup for 4.1:
- remove unused matrix header files
- dbgu + chip identification: new driver for SoC detection
  this allow to remove all additional io mapping
- remove old non-standard AT91 setup code

Documentation/devicetree/bindings/serial/atmel-usart.txt

 * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-usart"
+- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
   The compatible <chip> indicated will be the first SoC to support an
   additional mode or an USART new feature.
+  For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt
 - clock-names: tuple listing input clock names.

arch/arm/Kconfig

@@ -361,9 +361,9 @@ config ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
 	select PINCTRL
 	select PINCTRL_AT91
+	select SOC_BUS
 	select USE_OF
 	help
 	  This enables support for systems based on Atmel

arch/arm/boot/dts/at91rm9200.dtsi

@@ -830,7 +830,7 @@ pioD: gpio@fffffa00 {
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91rm9200-usart";
+				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9260.dtsi

@@ -753,7 +753,7 @@ pioC: gpio@fffff800 {
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9261.dtsi

@@ -276,7 +276,7 @@ aic: interrupt-controller@fffff000 {
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9263.dtsi

@@ -762,7 +762,7 @@ pioE: gpio@fffffa00 {
 			};
 
 			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -893,7 +893,7 @@ pioE: gpio@fffffa00 {
 			};
 
 			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -757,7 +757,7 @@ pioD: gpio@fffffa00 {
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -377,7 +377,7 @@ aic: interrupt-controller@fffff000 {
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -860,7 +860,7 @@ mmc1: mmc@f000c000 {
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/sama5d3.dtsi

@@ -439,7 +439,7 @@ ramc0: ramc@ffffea00 {
 			};
 
 			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,

arch/arm/boot/dts/sama5d4.dtsi

@@ -1064,7 +1064,7 @@ rtc@fc0686b0 {
 			};
 
 			dbgu: serial@fc069000 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/mach-at91/Kconfig

@@ -81,6 +81,7 @@ config SOC_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USB_CLK
+	select MIGHT_HAVE_PCI
 	select SRAM if PM
 
 config SOC_AT91SAM9

arch/arm/mach-at91/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= setup.o
+obj-y		:= soc.o
 
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 

arch/arm/mach-at91/at91rm9200.c

@@ -8,25 +8,22 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/clk-provider.h>
 
-#include <asm/setup.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/system_misc.h>
 
 #include <mach/at91_st.h>
 
 #include "generic.h"
+#include "soc.h"
+
+static const struct at91_soc rm9200_socs[] = {
+	AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
+	{ /* sentinel */ },
+};
 
 static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
 {
@@ -45,15 +42,20 @@ static void __init at91rm9200_dt_timer_init(void)
 
 static void __init at91rm9200_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	struct soc_device *soc;
+	struct device *soc_dev = NULL;
+
+	soc = at91_soc_init(rm9200_socs);
+	if (soc != NULL)
+		soc_dev = soc_device_to_device(soc);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
 	arm_pm_idle = at91rm9200_idle;
 	arm_pm_restart = at91rm9200_restart;
 	at91rm9200_pm_init();
 }
 
-
-
 static const char *at91rm9200_dt_board_compat[] __initconst = {
 	"atmel,at91rm9200",
 	NULL
@@ -61,7 +63,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
 	.init_time      = at91rm9200_dt_timer_init,
-	.map_io		= at91_map_io,
 	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END

arch/arm/mach-at91/at91sam9.c

@@ -7,29 +7,68 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/clk-provider.h>
 
-#include <asm/system_misc.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 
 #include "generic.h"
+#include "soc.h"
 
-static void __init at91sam9_dt_device_init(void)
+static const struct at91_soc at91sam9_socs[] = {
+	AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
+	AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
+	AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
+	AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
+	AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
+		 "at91sam9m11", "at91sam9g45"),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
+		 "at91sam9m10", "at91sam9g45"),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
+		 "at91sam9g46", "at91sam9g45"),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
+		 "at91sam9g45", "at91sam9g45"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
+		 "at91sam9g15", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
+		 "at91sam9g35", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
+		 "at91sam9x35", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
+		 "at91sam9g25", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
+		 "at91sam9x25", "at91sam9x5"),
+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
+		 "at91sam9cn12", "at91sam9n12"),
+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
+		 "at91sam9n12", "at91sam9n12"),
+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
+		 "at91sam9cn11", "at91sam9n12"),
+	AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
+	AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
+	AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
+	{ /* sentinel */ },
+};
+
+static void __init at91sam9_common_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	struct soc_device *soc;
+	struct device *soc_dev = NULL;
+
+	soc = at91_soc_init(at91sam9_socs);
+	if (soc != NULL)
+		soc_dev = soc_device_to_device(soc);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
 	arm_pm_idle = at91sam9_idle;
+}
+
+static void __init at91sam9_dt_device_init(void)
+{
+	at91sam9_common_init();
 	at91sam9260_pm_init();
 }
 
@@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= at91sam9_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
 
 static void __init at91sam9g45_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	arm_pm_idle = at91sam9_idle;
+	at91sam9_common_init();
 	at91sam9g45_pm_init();
 }
 
@@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= at91sam9g45_dt_device_init,
 	.dt_compat	= at91sam9g45_board_compat,
 MACHINE_END
 
 static void __init at91sam9x5_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	arm_pm_idle = at91sam9_idle;
+	at91sam9_common_init();
 	at91sam9x5_pm_init();
 }
 
@@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= at91sam9x5_dt_device_init,
 	.dt_compat	= at91sam9x5_board_compat,
 MACHINE_END

arch/arm/mach-at91/generic.h

@@ -25,10 +25,6 @@ extern void at91rm9200_timer_init(void);
 extern void at91rm9200_idle(void);
 extern void at91sam9_idle(void);
 
-/* Matrix */
-extern void at91_ioremap_matrix(u32 base_addr);
-
-
 #ifdef CONFIG_PM
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9260_pm_init(void);

arch/arm/mach-at91/include/mach/at91_matrix.h

-/*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#ifndef __MACH_AT91_MATRIX_H__
-#define __MACH_AT91_MATRIX_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_matrix_base;
-
-#define at91_matrix_read(field) \
-	__raw_readl(at91_matrix_base + field)
-
-#define at91_matrix_write(field, value) \
-	__raw_writel(value, at91_matrix_base + field)
-
-#else
-.extern at91_matrix_base
-#endif
-
-#endif /* __MACH_AT91_MATRIX_H__ */

arch/arm/mach-at91/include/mach/at91sam9260_matrix.h

-/*
- * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	0x11C			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9261_matrix.h

-/*
- * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	0x00			/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	0x04			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x08			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x0C			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x10			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x14			/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		0x24			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	0x30			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	0x34			/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9263_matrix.h

-/*
- * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
- *
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-
-#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBI0CSA	0x120			/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MATRIX_EBI1CSA	0x124			/* EBI1 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h

-/*
- * Matrix-centric header file for the AT91SAM9G45 family
- *
- *  Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_MATRIX_H
-#define AT91SAM9G45_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	0x24			/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	0x28			/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	0x2C			/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
-#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
-#define			AT91_MATRIX_ULBT_128		(7 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MATRIX_TCMR	0x110			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
-#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
-#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
-
-#define AT91_MATRIX_VIDEO	0x118			/* Video Mode Configuration Register */
-#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
-#define			AT91C_VDEC_SEL_OFF		(0 << 0)
-#define			AT91C_VDEC_SEL_ON		(1 << 0)
-
-#define AT91_MATRIX_EBICSA	0x128			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-
-#define AT91_MATRIX_WPMR	0x1E4			/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	0x1E8			/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h

-/*
- * Matrix-centric header file for the AT91SAM9N12
- *
- * Copyright (C) 2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _AT91SAM9N12_MATRIX_H_
-#define _AT91SAM9N12_MATRIX_H_
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x118)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
-#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
-#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
-#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
-#define			AT91_MATRIX_MP_OFF			(0 << 25)
-#define			AT91_MATRIX_MP_ON			(1 << 25)
-
-#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h

-/*
- * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-
-#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBICSA	0x120			/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h

-/*
- * Matrix-centric header file for the AT91SAM9x5 family
- *
- *  Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_MATRIX_H
-#define AT91SAM9X5_MATRIX_H
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
-#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
-#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
-#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
-#define			AT91_MATRIX_MP_OFF			(0 << 25)
-#define			AT91_MATRIX_MP_ON			(1 << 25)
-
-#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif

arch/arm/mach-at91/include/mach/io.h

-/*
- * arch/arm/mach-at91/include/mach/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-#define __io(a)			__typesafe_io(a)
-
-#endif

arch/arm/mach-at91/sama5.c

@@ -7,28 +7,50 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/clk-provider.h>
 
-#include <mach/hardware.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
+
+#include <mach/hardware.h>
 
 #include "generic.h"
+#include "soc.h"
+
+static const struct at91_soc sama5_socs[] = {
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
+		 "sama5d31", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
+		 "sama5d33", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
+		 "sama5d34", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
+		 "sama5d35", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
+		 "sama5d36", "sama5d3"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
+		 "sama5d41", "sama5d4"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
+		 "sama5d42", "sama5d4"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
+		 "sama5d43", "sama5d4"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
+		 "sama5d44", "sama5d4"),
+	{ /* sentinel */ },
+};
 
 static void __init sama5_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	struct soc_device *soc;
+	struct device *soc_dev = NULL;
+
+	soc = at91_soc_init(sama5_socs);
+	if (soc != NULL)
+		soc_dev = soc_device_to_device(soc);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 	at91sam9x5_pm_init();
 }
 
@@ -39,44 +61,10 @@ static const char *sama5_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
 
-static struct map_desc at91_io_desc[] __initdata = {
-	{
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
-	.length         = SZ_512,
-	.type           = MT_DEVICE,
-	},
-	{
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_PMC),
-	.length         = SZ_512,
-	.type           = MT_DEVICE,
-	},
-	{ /* On sama5d4, we use USART3 as serial console */
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_USART3),
-	.length         = SZ_256,
-	.type           = MT_DEVICE,
-	},
-	{ /* A bunch of peripheral with fine grained IO space */
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_SYS2),
-	.length         = SZ_2K,
-	.type           = MT_DEVICE,
-	},
-};
-
-static void __init sama5_alt_map_io(void)
-{
-	at91_alt_map_io();
-	iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
-}
-
 static const char *sama5_alt_dt_board_compat[] __initconst = {
 	"atmel,sama5d4",
 	NULL
@@ -84,7 +72,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
 	/* Maintainer: Atmel */
-	.map_io		= sama5_alt_map_io,
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_alt_dt_board_compat,
 	.l2c_aux_mask	= ~0UL,

arch/arm/mach-at91/setup.c

-/*
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#define pr_fmt(fmt)	"AT91: " fmt
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-#include <mach/at91_dbgu.h>
-
-#include "generic.h"
-#include "pm.h"
-
-struct at91_socinfo at91_soc_initdata;
-EXPORT_SYMBOL(at91_soc_initdata);
-
-static struct map_desc at91_io_desc __initdata __maybe_unused = {
-	.virtual	= (unsigned long)AT91_VA_BASE_SYS,
-	.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-	.length		= SZ_16K,
-	.type		= MT_DEVICE,
-};
-
-static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
-	.virtual	= (unsigned long)AT91_ALT_VA_BASE_SYS,
-	.pfn		= __phys_to_pfn(AT91_ALT_BASE_SYS),
-	.length		= 24 * SZ_1K,
-	.type		= MT_DEVICE,
-};
-
-static void __init soc_detect(u32 dbgu_base)
-{
-	u32 cidr, socid;
-
-	cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
-	socid = cidr & ~AT91_CIDR_VERSION;
-
-	switch (socid) {
-	case ARCH_ID_AT91RM9200:
-		at91_soc_initdata.type = AT91_SOC_RM9200;
-		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
-			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-		break;
-
-	case ARCH_ID_AT91SAM9260:
-		at91_soc_initdata.type = AT91_SOC_SAM9260;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9261:
-		at91_soc_initdata.type = AT91_SOC_SAM9261;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9263:
-		at91_soc_initdata.type = AT91_SOC_SAM9263;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9G20:
-		at91_soc_initdata.type = AT91_SOC_SAM9G20;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9G45:
-		at91_soc_initdata.type = AT91_SOC_SAM9G45;
-		if (cidr == ARCH_ID_AT91SAM9G45ES)
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
-		break;
-
-	case ARCH_ID_AT91SAM9RL64:
-		at91_soc_initdata.type = AT91_SOC_SAM9RL;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9X5:
-		at91_soc_initdata.type = AT91_SOC_SAM9X5;
-		break;
-
-	case ARCH_ID_AT91SAM9N12:
-		at91_soc_initdata.type = AT91_SOC_SAM9N12;
-		break;
-
-	case ARCH_ID_SAMA5:
-		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
-			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
-		}
-		break;
-	}
-
-	/* at91sam9g10 */
-	if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
-		at91_soc_initdata.type = AT91_SOC_SAM9G10;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-	}
-	/* at91sam9xe */
-	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
-		at91_soc_initdata.type = AT91_SOC_SAM9260;
-		at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
-	}
-
-	if (!at91_soc_is_detected())
-		return;
-
-	at91_soc_initdata.cidr = cidr;
-
-	/* sub version of soc */
-	if (!at91_soc_initdata.exid)
-		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
-	if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_AT91SAM9M10:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
-			break;
-		case ARCH_EXID_AT91SAM9G46:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
-			break;
-		case ARCH_EXID_AT91SAM9M11:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
-			break;
-		}
-	}
-
-	if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_AT91SAM9G15:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
-			break;
-		case ARCH_EXID_AT91SAM9G35:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
-			break;
-		case ARCH_EXID_AT91SAM9X35:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
-			break;
-		case ARCH_EXID_AT91SAM9G25:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
-			break;
-		case ARCH_EXID_AT91SAM9X25:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
-			break;
-		}
-	}
-
-	if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_SAMA5D31:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
-			break;
-		case ARCH_EXID_SAMA5D33:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
-			break;
-		case ARCH_EXID_SAMA5D34:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
-			break;
-		case ARCH_EXID_SAMA5D35:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
-			break;
-		case ARCH_EXID_SAMA5D36:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
-			break;
-		}
-	}
-}
-
-static void __init alt_soc_detect(u32 dbgu_base)
-{
-	u32 cidr, socid;
-
-	/* SoC ID */
-	cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
-	socid = cidr & ~AT91_CIDR_VERSION;
-
-	switch (socid) {
-	case ARCH_ID_SAMA5:
-		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
-			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
-		} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
-			at91_soc_initdata.type = AT91_SOC_SAMA5D4;
-		}
-		break;
-	}
-
-	if (!at91_soc_is_detected())
-		return;
-
-	at91_soc_initdata.cidr = cidr;
-
-	/* sub version of soc */
-	if (!at91_soc_initdata.exid)
-		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
-	if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_SAMA5D41:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
-			break;
-		case ARCH_EXID_SAMA5D42:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
-			break;
-		case ARCH_EXID_SAMA5D43:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
-			break;
-		case ARCH_EXID_SAMA5D44:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
-			break;
-		}
-	}
-}
-
-static const char *soc_name[] = {
-	[AT91_SOC_RM9200]	= "at91rm9200",
-	[AT91_SOC_SAM9260]	= "at91sam9260",
-	[AT91_SOC_SAM9261]	= "at91sam9261",
-	[AT91_SOC_SAM9263]	= "at91sam9263",
-	[AT91_SOC_SAM9G10]	= "at91sam9g10",
-	[AT91_SOC_SAM9G20]	= "at91sam9g20",
-	[AT91_SOC_SAM9G45]	= "at91sam9g45",
-	[AT91_SOC_SAM9RL]	= "at91sam9rl",
-	[AT91_SOC_SAM9X5]	= "at91sam9x5",
-	[AT91_SOC_SAM9N12]	= "at91sam9n12",
-	[AT91_SOC_SAMA5D3]	= "sama5d3",
-	[AT91_SOC_SAMA5D4]	= "sama5d4",
-	[AT91_SOC_UNKNOWN]	= "Unknown",
-};
-
-const char *at91_get_soc_type(struct at91_socinfo *c)
-{
-	return soc_name[c->type];
-}
-EXPORT_SYMBOL(at91_get_soc_type);
-
-static const char *soc_subtype_name[] = {
-	[AT91_SOC_RM9200_BGA]	= "at91rm9200 BGA",
-	[AT91_SOC_RM9200_PQFP]	= "at91rm9200 PQFP",
-	[AT91_SOC_SAM9XE]	= "at91sam9xe",
-	[AT91_SOC_SAM9G45ES]	= "at91sam9g45es",
-	[AT91_SOC_SAM9M10]	= "at91sam9m10",
-	[AT91_SOC_SAM9G46]	= "at91sam9g46",
-	[AT91_SOC_SAM9M11]	= "at91sam9m11",
-	[AT91_SOC_SAM9G15]	= "at91sam9g15",
-	[AT91_SOC_SAM9G35]	= "at91sam9g35",
-	[AT91_SOC_SAM9X35]	= "at91sam9x35",
-	[AT91_SOC_SAM9G25]	= "at91sam9g25",
-	[AT91_SOC_SAM9X25]	= "at91sam9x25",
-	[AT91_SOC_SAMA5D31]	= "sama5d31",
-	[AT91_SOC_SAMA5D33]	= "sama5d33",
-	[AT91_SOC_SAMA5D34]	= "sama5d34",
-	[AT91_SOC_SAMA5D35]	= "sama5d35",
-	[AT91_SOC_SAMA5D36]	= "sama5d36",
-	[AT91_SOC_SAMA5D41]	= "sama5d41",
-	[AT91_SOC_SAMA5D42]	= "sama5d42",
-	[AT91_SOC_SAMA5D43]	= "sama5d43",
-	[AT91_SOC_SAMA5D44]	= "sama5d44",
-	[AT91_SOC_SUBTYPE_NONE]	= "None",
-	[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
-};
-
-const char *at91_get_soc_subtype(struct at91_socinfo *c)
-{
-	return soc_subtype_name[c->subtype];
-}
-EXPORT_SYMBOL(at91_get_soc_subtype);
-
-void __init at91_map_io(void)
-{
-	/* Map peripherals */
-	iotable_init(&at91_io_desc, 1);
-
-	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
-	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
-
-	soc_detect(AT91_BASE_DBGU0);
-	if (!at91_soc_is_detected())
-		soc_detect(AT91_BASE_DBGU1);
-
-	if (!at91_soc_is_detected())
-		panic(pr_fmt("Impossible to detect the SOC type"));
-
-	pr_info("Detected soc type: %s\n",
-		at91_get_soc_type(&at91_soc_initdata));
-	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
-		pr_info("Detected soc subtype: %s\n",
-			at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __init at91_alt_map_io(void)
-{
-	/* Map peripherals */
-	iotable_init(&at91_alt_io_desc, 1);
-
-	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
-	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
-
-	alt_soc_detect(AT91_BASE_DBGU2);
-	if (!at91_soc_is_detected())
-		panic("AT91: Impossible to detect the SOC type");
-
-	pr_info("AT91: Detected soc type: %s\n",
-		at91_get_soc_type(&at91_soc_initdata));
-	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
-		pr_info("AT91: Detected soc subtype: %s\n",
-			at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __iomem *at91_matrix_base;
-EXPORT_SYMBOL_GPL(at91_matrix_base);
-
-void __init at91_ioremap_matrix(u32 base_addr)
-{
-	at91_matrix_base = ioremap(base_addr, 512);
-	if (!at91_matrix_base)
-		panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
-}

arch/arm/mach-at91/soc.c

+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#define pr_fmt(fmt)	"AT91: " fmt
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include "soc.h"
+
+#define AT91_DBGU_CIDR			0x40
+#define AT91_DBGU_CIDR_VERSION(x)	((x) & 0x1f)
+#define AT91_DBGU_CIDR_EXT		BIT(31)
+#define AT91_DBGU_CIDR_MATCH_MASK	0x7fffffe0
+#define AT91_DBGU_EXID			0x44
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	const struct at91_soc *soc;
+	struct soc_device *soc_dev;
+	struct device_node *np;
+	void __iomem *regs;
+	u32 cidr, exid;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL,
+					     "atmel,at91sam9260-dbgu");
+
+	if (!np) {
+		pr_warn("Could not find DBGU node");
+		return NULL;
+	}
+
+	regs = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!regs) {
+		pr_warn("Could not map DBGU iomem range");
+		return NULL;
+	}
+
+	cidr = readl(regs + AT91_DBGU_CIDR);
+	exid = readl(regs + AT91_DBGU_EXID);
+
+	iounmap(regs);
+
+	for (soc = socs; soc->name; soc++) {
+		if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+			continue;
+
+		if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+			break;
+	}
+
+	if (!soc->name) {
+		pr_warn("Could not find matching SoC description\n");
+		return NULL;
+	}
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return NULL;
+
+	soc_dev_attr->family = soc->family;
+	soc_dev_attr->soc_id = soc->name;
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
+					   AT91_DBGU_CIDR_VERSION(cidr));
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr);
+		pr_warn("Could not register SoC device\n");
+		return NULL;
+	}
+
+	if (soc->family)
+		pr_info("Detected SoC family: %s\n", soc->family);
+	pr_info("Detected SoC: %s, revision %X\n", soc->name,
+		AT91_DBGU_CIDR_VERSION(cidr));
+
+	return soc_dev;
+}

arch/arm/mach-at91/soc.h

+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#ifndef __AT91_SOC_H
+#define __AT91_SOC_H
+
+#include <linux/sys_soc.h>
+
+struct at91_soc {
+	u32 cidr_match;
+	u32 exid_match;
+	const char *name;
+	const char *family;
+};
+
+#define AT91_SOC(__cidr, __exid, __name, __family)		\
+	{							\
+		.cidr_match = (__cidr),				\
+		.exid_match = (__exid),				\
+		.name = (__name),				\
+		.family = (__family),				\
+	}
+
+struct soc_device * __init
+at91_soc_init(const struct at91_soc *socs);
+
+#define AT91RM9200_CIDR_MATCH		0x09290780
+
+#define AT91SAM9260_CIDR_MATCH		0x019803a0
+#define AT91SAM9261_CIDR_MATCH		0x019703a0
+#define AT91SAM9263_CIDR_MATCH		0x019607a0
+#define AT91SAM9G20_CIDR_MATCH		0x019905a0
+#define AT91SAM9RL64_CIDR_MATCH		0x019b03a0
+#define AT91SAM9G45_CIDR_MATCH		0x019b05a0
+#define AT91SAM9X5_CIDR_MATCH		0x019a05a0
+#define AT91SAM9N12_CIDR_MATCH		0x019a07a0
+
+#define AT91SAM9M11_EXID_MATCH		0x00000001
+#define AT91SAM9M10_EXID_MATCH		0x00000002
+#define AT91SAM9G46_EXID_MATCH		0x00000003
+#define AT91SAM9G45_EXID_MATCH		0x00000004
+
+#define AT91SAM9G15_EXID_MATCH		0x00000000
+#define AT91SAM9G35_EXID_MATCH		0x00000001
+#define AT91SAM9X35_EXID_MATCH		0x00000002
+#define AT91SAM9G25_EXID_MATCH		0x00000003
+#define AT91SAM9X25_EXID_MATCH		0x00000004
+
+#define AT91SAM9CN12_EXID_MATCH		0x00000005
+#define AT91SAM9N12_EXID_MATCH		0x00000006
+#define AT91SAM9CN11_EXID_MATCH		0x00000009
+
+#define AT91SAM9XE128_CIDR_MATCH	0x329973a0
+#define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
+#define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
+
+#define SAMA5D3_CIDR_MATCH		0x0a5c07c0
+#define SAMA5D31_EXID_MATCH		0x00444300
+#define SAMA5D33_EXID_MATCH		0x00414300
+#define SAMA5D34_EXID_MATCH		0x00414301
+#define SAMA5D35_EXID_MATCH		0x00584300
+#define SAMA5D36_EXID_MATCH		0x00004301
+
+#define SAMA5D4_CIDR_MATCH		0x0a5c07c0
+#define SAMA5D41_EXID_MATCH		0x00000001
+#define SAMA5D42_EXID_MATCH		0x00000002
+#define SAMA5D43_EXID_MATCH		0x00000003
+#define SAMA5D44_EXID_MATCH		0x00000004
+
+#endif /* __AT91_SOC_H */

drivers/pcmcia/Kconfig

@@ -278,6 +278,7 @@ config BFIN_CFPCMCIA
 
 config AT91_CF
 	tristate "AT91 CompactFlash Controller"
+	depends on PCI
 	depends on PCMCIA && ARCH_AT91
 	depends on !ARCH_MULTIPLATFORM
 	help

drivers/pcmcia/at91_cf.c

@@ -317,13 +317,14 @@ static int at91_cf_probe(struct platform_device *pdev)
 	} else
 		cf->socket.pci_irq = nr_irqs + 1;
 
-	/* pcmcia layer only remaps "real" memory not iospace */
-	cf->socket.io_offset = (unsigned long) devm_ioremap(&pdev->dev,
-					cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
-	if (!cf->socket.io_offset) {
-		status = -ENXIO;
+	/*
+	 * pcmcia layer only remaps "real" memory not iospace
+	 * io_offset is set to 0x10000 to avoid the check in static_find_io().
+	 * */
+	cf->socket.io_offset = 0x10000;
+	status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS);
+	if (status)
 		goto fail0a;
-	}
 
 	/* reserve chip-select regions */
 	if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) {