V4L/DVB: V4L: dm644x_ccdc: Add 10bit BT support

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/davinci/dm644x_ccdc.c

@@ -400,7 +400,11 @@ void ccdc_config_ycbcr(void)
 		 * configure the FID, VD, HD pin polarity,
 		 * fld,hd pol positive, vd negative, 8-bit data
 		 */
-		syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE | CCDC_SYN_MODE_8BITS;
+		syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE;
+		if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
+			syn_mode |= CCDC_SYN_MODE_10BITS;
+		else
+			syn_mode |= CCDC_SYN_MODE_8BITS;
 	} else {
 		/* y/c external sync mode */
 		syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
@@ -419,8 +423,13 @@ void ccdc_config_ycbcr(void)
 	 * configure the order of y cb cr in SDRAM, and disable latch
 	 * internal register on vsync
 	 */
-	regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
-		 CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
+	if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
+		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
+			CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT,
+			CCDC_CCDCFG);
+	else
+		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
+			CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
 
 	/*
 	 * configure the horizontal line offset. This should be a
@@ -826,6 +835,7 @@ static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
 	case VPFE_BT656:
 	case VPFE_YCBCR_SYNC_16:
 	case VPFE_YCBCR_SYNC_8:
+	case VPFE_BT656_10BIT:
 		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
 		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
 		break;

drivers/media/video/davinci/dm644x_ccdc_regs.h

@@ -135,11 +135,19 @@
 #define CCDC_SYN_MODE_INPMOD_SHIFT		12
 #define CCDC_SYN_MODE_INPMOD_MASK		3
 #define CCDC_SYN_MODE_8BITS			(7 << 8)
+#define CCDC_SYN_MODE_10BITS			(6 << 8)
+#define CCDC_SYN_MODE_11BITS			(5 << 8)
+#define CCDC_SYN_MODE_12BITS			(4 << 8)
+#define CCDC_SYN_MODE_13BITS			(3 << 8)
+#define CCDC_SYN_MODE_14BITS			(2 << 8)
+#define CCDC_SYN_MODE_15BITS			(1 << 8)
+#define CCDC_SYN_MODE_16BITS			(0 << 8)
 #define CCDC_SYN_FLDMODE_MASK			1
 #define CCDC_SYN_FLDMODE_SHIFT			7
 #define CCDC_REC656IF_BT656_EN			3
 #define CCDC_SYN_MODE_VD_POL_NEGATIVE		(1 << 2)
 #define CCDC_CCDCFG_Y8POS_SHIFT			11
+#define CCDC_CCDCFG_BW656_10BIT 		(1 << 5)
 #define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
 #define CCDC_NO_CULLING				0xffff00ff
 #endif