Commit 21b03cfe authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: clean up isp1362 board resources

Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into
mainline and it was a bad interface into the board resources.  For boards
that actually used this, replace it with an actual IRQ define.  For boards
that didn't, simply drop the resources.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 5cd82a6d
...@@ -15,9 +15,6 @@ ...@@ -15,9 +15,6 @@
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/flash.h> #include <linux/spi/flash.h>
#include <linux/etherdevice.h> #include <linux/etherdevice.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
...@@ -317,45 +314,6 @@ static struct platform_device sl811_hcd_device = { ...@@ -317,45 +314,6 @@ static struct platform_device sl811_hcd_device = {
}; };
#endif #endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
}, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
}, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct isp1362_platform_data isp1362_priv = {
.sel15Kres = 1,
.clknotstop = 0,
.oc_enable = 0,
.int_act_high = 0,
.int_edge_triggered = 0,
.remote_wakeup_connected = 0,
.no_power_switching = 1,
.power_switching_mode = 0,
};
static struct platform_device isp1362_hcd_device = {
.name = "isp1362-hcd",
.id = 0,
.dev = {
.platform_data = &isp1362_priv,
},
.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
.resource = isp1362_hcd_resources,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = { static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus", .name = "bfin_mii_bus",
...@@ -841,10 +799,6 @@ static struct platform_device *cmbf527_devices[] __initdata = { ...@@ -841,10 +799,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
&sl811_hcd_device, &sl811_hcd_device,
#endif #endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device, &bfin_isp1760_device,
#endif #endif
......
...@@ -13,9 +13,6 @@ ...@@ -13,9 +13,6 @@
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/flash.h> #include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
...@@ -373,45 +370,6 @@ static struct platform_device sl811_hcd_device = { ...@@ -373,45 +370,6 @@ static struct platform_device sl811_hcd_device = {
}; };
#endif #endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
}, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
}, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct isp1362_platform_data isp1362_priv = {
.sel15Kres = 1,
.clknotstop = 0,
.oc_enable = 0,
.int_act_high = 0,
.int_edge_triggered = 0,
.remote_wakeup_connected = 0,
.no_power_switching = 1,
.power_switching_mode = 0,
};
static struct platform_device isp1362_hcd_device = {
.name = "isp1362-hcd",
.id = 0,
.dev = {
.platform_data = &isp1362_priv,
},
.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
.resource = isp1362_hcd_resources,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = { static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus", .name = "bfin_mii_bus",
...@@ -918,10 +876,6 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -918,10 +876,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&sl811_hcd_device, &sl811_hcd_device,
#endif #endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device, &bfin_isp1760_device,
#endif #endif
......
...@@ -13,9 +13,6 @@ ...@@ -13,9 +13,6 @@
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/flash.h> #include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h> #include <linux/irq.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/bfin5xx_spi.h> #include <asm/bfin5xx_spi.h>
...@@ -147,45 +144,6 @@ static struct platform_device sl811_hcd_device = { ...@@ -147,45 +144,6 @@ static struct platform_device sl811_hcd_device = {
}; };
#endif #endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
}, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
}, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct isp1362_platform_data isp1362_priv = {
.sel15Kres = 1,
.clknotstop = 0,
.oc_enable = 0,
.int_act_high = 0,
.int_edge_triggered = 0,
.remote_wakeup_connected = 0,
.no_power_switching = 1,
.power_switching_mode = 0,
};
static struct platform_device isp1362_hcd_device = {
.name = "isp1362-hcd",
.id = 0,
.dev = {
.platform_data = &isp1362_priv,
},
.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
.resource = isp1362_hcd_resources,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = { static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus", .name = "bfin_mii_bus",
...@@ -492,10 +450,6 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -492,10 +450,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&sl811_hcd_device, &sl811_hcd_device,
#endif #endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device, &smc91x_device,
#endif #endif
......
...@@ -272,8 +272,8 @@ static struct resource isp1362_hcd_resources[] = { ...@@ -272,8 +272,8 @@ static struct resource isp1362_hcd_resources[] = {
.end = 0x20360004, .end = 0x20360004,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .start = IRQ_PF3,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .end = IRQ_PF3,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment