Commit 21bea26c authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'thunderbolt-for-v6.8-rc1' of...

Merge tag 'thunderbolt-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next

Mika writes:

thunderbolt: Changes for v6.8 merge window

This includes following USB4/Thunderbolt changes for the v6.8 merge
window:

  - Intel Lunar Lake support
  - PCIe tunneling improvements
  - DisplayPort tunneling improvements
  - Asymmetric switching improvements
  - Couple of minor fixes and cleanups.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Reduce retry timeout to speed up boot for some devices
  thunderbolt: Keep link as asymmetric if preferred by hardware
  thunderbolt: Add support for Intel Lunar Lake
  thunderbolt: Disable PCIe extended encapsulation upon teardown properly
  thunderbolt: Make PCIe tunnel setup and teardown follow CM guide
  thunderbolt: Improve logging when DisplayPort resource is added due to hotplug
  thunderbolt: Use tb_dp_read_cap() to read DP_COMMON_CAP as well
  thunderbolt: Disable CL states only when actually needed
  thunderbolt: Transition link to asymmetric only when both sides support it
  thunderbolt: Log XDomain link speed and width
  thunderbolt: Move width_name() helper to tb.h
  thunderbolt: Handle lane bonding of Gen 4 XDomain links properly
  thunderbolt: Unwind TMU configuration if tb_switch_set_tmu_mode_params() fails
  thunderbolt: Remove duplicated re-assignment of pointer 'out'
parents 1760bfa7 04b99eac
......@@ -1020,7 +1020,7 @@ icm_tr_driver_ready(struct tb *tb, enum tb_security_level *security_level,
memset(&reply, 0, sizeof(reply));
ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
1, 10, 2000);
1, 10, 250);
if (ret)
return ret;
......
......@@ -1517,6 +1517,10 @@ static struct pci_device_id nhi_ids[] = {
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI1),
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_LNL_NHI0),
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_LNL_NHI1),
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI) },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI) },
......
......@@ -90,6 +90,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
#define PCI_DEVICE_ID_INTEL_TGL_H_NHI1 0x9a21
#define PCI_DEVICE_ID_INTEL_RPL_NHI0 0xa73e
#define PCI_DEVICE_ID_INTEL_RPL_NHI1 0xa76d
#define PCI_DEVICE_ID_INTEL_LNL_NHI0 0xa833
#define PCI_DEVICE_ID_INTEL_LNL_NHI1 0xa834
#define PCI_CLASS_SERIAL_USB_USB4 0x0c0340
......
......@@ -941,22 +941,6 @@ int tb_port_get_link_generation(struct tb_port *port)
}
}
static const char *width_name(enum tb_link_width width)
{
switch (width) {
case TB_LINK_WIDTH_SINGLE:
return "symmetric, single lane";
case TB_LINK_WIDTH_DUAL:
return "symmetric, dual lanes";
case TB_LINK_WIDTH_ASYM_TX:
return "asymmetric, 3 transmitters, 1 receiver";
case TB_LINK_WIDTH_ASYM_RX:
return "asymmetric, 3 receivers, 1 transmitter";
default:
return "unknown";
}
}
/**
* tb_port_get_link_width() - Get current link width
* @port: Port to check (USB4 or CIO)
......@@ -2769,7 +2753,7 @@ static void tb_switch_link_init(struct tb_switch *sw)
return;
tb_sw_dbg(sw, "current link speed %u.0 Gb/s\n", sw->link_speed);
tb_sw_dbg(sw, "current link width %s\n", width_name(sw->link_width));
tb_sw_dbg(sw, "current link width %s\n", tb_width_name(sw->link_width));
bonded = sw->link_width >= TB_LINK_WIDTH_DUAL;
......@@ -2789,6 +2773,19 @@ static void tb_switch_link_init(struct tb_switch *sw)
if (down->dual_link_port)
down->dual_link_port->bonded = bonded;
tb_port_update_credits(down);
if (tb_port_get_link_generation(up) < 4)
return;
/*
* Set the Gen 4 preferred link width. This is what the router
* prefers when the link is brought up. If the router does not
* support asymmetric link configuration, this also will be set
* to TB_LINK_WIDTH_DUAL.
*/
sw->preferred_link_width = sw->link_width;
tb_sw_dbg(sw, "preferred link width %s\n",
tb_width_name(sw->preferred_link_width));
}
/**
......@@ -3029,7 +3026,7 @@ int tb_switch_set_link_width(struct tb_switch *sw, enum tb_link_width width)
tb_switch_update_link_attributes(sw);
tb_sw_dbg(sw, "link width set to %s\n", width_name(width));
tb_sw_dbg(sw, "link width set to %s\n", tb_width_name(width));
return ret;
}
......
......@@ -513,8 +513,6 @@ static void tb_port_unconfigure_xdomain(struct tb_port *port)
usb4_port_unconfigure_xdomain(port);
else
tb_lc_unconfigure_xdomain(port);
tb_port_enable(port->dual_link_port);
}
static void tb_scan_xdomain(struct tb_port *port)
......@@ -1087,15 +1085,14 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port,
struct tb_port *dst_port, int requested_up,
int requested_down)
{
bool clx = false, clx_disabled = false, downstream;
struct tb_switch *sw;
bool clx, downstream;
struct tb_port *up;
int ret = 0;
if (!asym_threshold)
return 0;
/* Disable CL states before doing any transitions */
downstream = tb_port_path_direction_downstream(src_port, dst_port);
/* Pick up router deepest in the hierarchy */
if (downstream)
......@@ -1103,11 +1100,10 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port,
else
sw = src_port->sw;
clx = tb_disable_clx(sw);
tb_for_each_upstream_port_on_path(src_port, dst_port, up) {
struct tb_port *down = tb_switch_downstream_port(up->sw);
enum tb_link_width width_up, width_down;
int consumed_up, consumed_down;
enum tb_link_width width;
ret = tb_consumed_dp_bandwidth(tb, src_port, dst_port, up,
&consumed_up, &consumed_down);
......@@ -1128,7 +1124,8 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port,
if (consumed_down + requested_down < asym_threshold)
continue;
width = TB_LINK_WIDTH_ASYM_RX;
width_up = TB_LINK_WIDTH_ASYM_RX;
width_down = TB_LINK_WIDTH_ASYM_TX;
} else {
/* Upstream, the opposite of above */
if (consumed_down + requested_down >= TB_ASYM_MIN) {
......@@ -1138,22 +1135,34 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port,
if (consumed_up + requested_up < asym_threshold)
continue;
width = TB_LINK_WIDTH_ASYM_TX;
width_up = TB_LINK_WIDTH_ASYM_TX;
width_down = TB_LINK_WIDTH_ASYM_RX;
}
if (up->sw->link_width == width)
if (up->sw->link_width == width_up)
continue;
if (!tb_port_width_supported(up, width))
if (!tb_port_width_supported(up, width_up) ||
!tb_port_width_supported(down, width_down))
continue;
/*
* Disable CL states before doing any transitions. We
* delayed it until now that we know there is a real
* transition taking place.
*/
if (!clx_disabled) {
clx = tb_disable_clx(sw);
clx_disabled = true;
}
tb_sw_dbg(up->sw, "configuring asymmetric link\n");
/*
* Here requested + consumed > threshold so we need to
* transtion the link into asymmetric now.
*/
ret = tb_switch_set_link_width(up->sw, width);
ret = tb_switch_set_link_width(up->sw, width_up);
if (ret) {
tb_sw_warn(up->sw, "failed to set link width\n");
break;
......@@ -1174,24 +1183,24 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port,
* @dst_port: Destination adapter
* @requested_up: New lower bandwidth request upstream (Mb/s)
* @requested_down: New lower bandwidth request downstream (Mb/s)
* @keep_asym: Keep asymmetric link if preferred
*
* Goes over each link from @src_port to @dst_port and tries to
* transition the link to symmetric if the currently consumed bandwidth
* allows.
* allows and link asymmetric preference is ignored (if @keep_asym is %false).
*/
static int tb_configure_sym(struct tb *tb, struct tb_port *src_port,
struct tb_port *dst_port, int requested_up,
int requested_down)
int requested_down, bool keep_asym)
{
bool clx = false, clx_disabled = false, downstream;
struct tb_switch *sw;
bool clx, downstream;
struct tb_port *up;
int ret = 0;
if (!asym_threshold)
return 0;
/* Disable CL states before doing any transitions */
downstream = tb_port_path_direction_downstream(src_port, dst_port);
/* Pick up router deepest in the hierarchy */
if (downstream)
......@@ -1199,8 +1208,6 @@ static int tb_configure_sym(struct tb *tb, struct tb_port *src_port,
else
sw = src_port->sw;
clx = tb_disable_clx(sw);
tb_for_each_upstream_port_on_path(src_port, dst_port, up) {
int consumed_up, consumed_down;
......@@ -1233,6 +1240,25 @@ static int tb_configure_sym(struct tb *tb, struct tb_port *src_port,
if (up->sw->link_width == TB_LINK_WIDTH_DUAL)
continue;
/*
* Here consumed < threshold so we can transition the
* link to symmetric.
*
* However, if the router prefers asymmetric link we
* honor that (unless @keep_asym is %false).
*/
if (keep_asym &&
up->sw->preferred_link_width > TB_LINK_WIDTH_DUAL) {
tb_sw_dbg(up->sw, "keeping preferred asymmetric link\n");
continue;
}
/* Disable CL states before doing any transitions */
if (!clx_disabled) {
clx = tb_disable_clx(sw);
clx_disabled = true;
}
tb_sw_dbg(up->sw, "configuring symmetric link\n");
ret = tb_switch_set_link_width(up->sw, TB_LINK_WIDTH_DUAL);
......@@ -1280,7 +1306,7 @@ static void tb_configure_link(struct tb_port *down, struct tb_port *up,
struct tb_port *host_port;
host_port = tb_port_at(tb_route(sw), tb->root_switch);
tb_configure_sym(tb, host_port, up, 0, 0);
tb_configure_sym(tb, host_port, up, 0, 0, false);
}
/* Set the link configured */
......@@ -1465,7 +1491,7 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel)
* If bandwidth on a link is < asym_threshold
* transition the link to symmetric.
*/
tb_configure_sym(tb, src_port, dst_port, 0, 0);
tb_configure_sym(tb, src_port, dst_port, 0, 0, true);
/* Now we can allow the domain to runtime suspend again */
pm_runtime_mark_last_busy(&dst_port->sw->dev);
pm_runtime_put_autosuspend(&dst_port->sw->dev);
......@@ -1901,7 +1927,7 @@ static void tb_dp_resource_available(struct tb *tb, struct tb_port *port)
return;
}
tb_port_dbg(port, "DP %s resource available\n",
tb_port_dbg(port, "DP %s resource available after hotplug\n",
tb_port_is_dpin(port) ? "IN" : "OUT");
list_add_tail(&port->list, &tcm->dp_resources);
......@@ -2287,7 +2313,7 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up,
* If bandwidth on a link is < asym_threshold transition
* the link to symmetric.
*/
tb_configure_sym(tb, in, out, *requested_up, *requested_down);
tb_configure_sym(tb, in, out, *requested_up, *requested_down, true);
/*
* If requested bandwidth is less or equal than what is
* currently allocated to that tunnel we simply change
......@@ -2330,7 +2356,7 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up,
ret = tb_configure_asym(tb, in, out, *requested_up,
*requested_down);
if (ret) {
tb_configure_sym(tb, in, out, 0, 0);
tb_configure_sym(tb, in, out, 0, 0, true);
return ret;
}
......@@ -2338,7 +2364,7 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up,
requested_down);
if (ret) {
tb_tunnel_warn(tunnel, "failed to allocate bandwidth\n");
tb_configure_sym(tb, in, out, 0, 0);
tb_configure_sym(tb, in, out, 0, 0, true);
}
} else {
ret = -ENOBUFS;
......
......@@ -125,6 +125,7 @@ struct tb_switch_tmu {
* @device_name: Name of the device (or %NULL if not known)
* @link_speed: Speed of the link in Gb/s
* @link_width: Width of the upstream facing link
* @preferred_link_width: Router preferred link width (only set for Gen 4 links)
* @link_usb4: Upstream link is USB4
* @generation: Switch Thunderbolt generation
* @cap_plug_events: Offset to the plug events capability (%0 if not found)
......@@ -178,6 +179,7 @@ struct tb_switch {
const char *device_name;
unsigned int link_speed;
enum tb_link_width link_width;
enum tb_link_width preferred_link_width;
bool link_usb4;
unsigned int generation;
int cap_plug_events;
......@@ -568,6 +570,22 @@ static inline struct tb_port *tb_port_at(u64 route, struct tb_switch *sw)
return &sw->ports[port];
}
static inline const char *tb_width_name(enum tb_link_width width)
{
switch (width) {
case TB_LINK_WIDTH_SINGLE:
return "symmetric, single lane";
case TB_LINK_WIDTH_DUAL:
return "symmetric, dual lanes";
case TB_LINK_WIDTH_ASYM_TX:
return "asymmetric, 3 transmitters, 1 receiver";
case TB_LINK_WIDTH_ASYM_RX:
return "asymmetric, 3 receivers, 1 transmitter";
default:
return "unknown";
}
}
/**
* tb_port_has_remote() - Does the port have switch connected downstream
* @port: Port to check
......
......@@ -894,7 +894,7 @@ static int tb_switch_tmu_change_mode(struct tb_switch *sw)
ret = tb_switch_set_tmu_mode_params(sw, sw->tmu.mode_request);
if (ret)
return ret;
goto out;
/* Program the new mode and the downstream router lane adapter */
switch (sw->tmu.mode_request) {
......
......@@ -173,16 +173,28 @@ static int tb_pci_set_ext_encapsulation(struct tb_tunnel *tunnel, bool enable)
int ret;
/* Only supported of both routers are at least USB4 v2 */
if (tb_port_get_link_generation(port) < 4)
if ((usb4_switch_version(tunnel->src_port->sw) < 2) ||
(usb4_switch_version(tunnel->dst_port->sw) < 2))
return 0;
if (enable && tb_port_get_link_generation(port) < 4)
return 0;
ret = usb4_pci_port_set_ext_encapsulation(tunnel->src_port, enable);
if (ret)
return ret;
/*
* Downstream router could be unplugged so disable of encapsulation
* in upstream router is still possible.
*/
ret = usb4_pci_port_set_ext_encapsulation(tunnel->dst_port, enable);
if (ret)
return ret;
if (ret) {
if (enable)
return ret;
if (ret != -ENODEV)
return ret;
}
tb_tunnel_dbg(tunnel, "extended encapsulation %s\n",
str_enabled_disabled(enable));
......@@ -199,14 +211,21 @@ static int tb_pci_activate(struct tb_tunnel *tunnel, bool activate)
return res;
}
res = tb_pci_port_enable(tunnel->src_port, activate);
if (activate)
res = tb_pci_port_enable(tunnel->dst_port, activate);
else
res = tb_pci_port_enable(tunnel->src_port, activate);
if (res)
return res;
if (tb_port_is_pcie_up(tunnel->dst_port)) {
res = tb_pci_port_enable(tunnel->dst_port, activate);
if (activate) {
res = tb_pci_port_enable(tunnel->src_port, activate);
if (res)
return res;
} else {
/* Downstream router could be unplugged */
tb_pci_port_enable(tunnel->dst_port, activate);
}
return activate ? 0 : tb_pci_set_ext_encapsulation(tunnel, activate);
......@@ -1067,8 +1086,7 @@ static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up,
return 0;
}
static int tb_dp_read_dprx(struct tb_tunnel *tunnel, u32 *rate, u32 *lanes,
int timeout_msec)
static int tb_dp_wait_dprx(struct tb_tunnel *tunnel, int timeout_msec)
{
ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec);
struct tb_port *in = tunnel->src_port;
......@@ -1087,15 +1105,13 @@ static int tb_dp_read_dprx(struct tb_tunnel *tunnel, u32 *rate, u32 *lanes,
return ret;
if (val & DP_COMMON_CAP_DPRX_DONE) {
*rate = tb_dp_cap_get_rate(val);
*lanes = tb_dp_cap_get_lanes(val);
tb_tunnel_dbg(tunnel, "DPRX read done\n");
return 0;
}
usleep_range(100, 150);
} while (ktime_before(ktime_get(), timeout));
tb_tunnel_dbg(tunnel, "DPRX read timeout\n");
return -ETIMEDOUT;
}
......@@ -1110,6 +1126,7 @@ static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate,
switch (cap) {
case DP_LOCAL_CAP:
case DP_REMOTE_CAP:
case DP_COMMON_CAP:
break;
default:
......@@ -1182,7 +1199,7 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up,
* reduced one). Otherwise return the remote (possibly
* reduced) caps.
*/
ret = tb_dp_read_dprx(tunnel, &rate, &lanes, 150);
ret = tb_dp_wait_dprx(tunnel, 150);
if (ret) {
if (ret == -ETIMEDOUT)
ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP,
......@@ -1190,6 +1207,9 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up,
if (ret)
return ret;
}
ret = tb_dp_read_cap(tunnel, DP_COMMON_CAP, &rate, &lanes);
if (ret)
return ret;
} else if (sw->generation >= 2) {
ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, &rate, &lanes);
if (ret)
......@@ -1313,8 +1333,6 @@ static void tb_dp_dump(struct tb_tunnel *tunnel)
"DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n",
rate, lanes, tb_dp_bandwidth(rate, lanes));
out = tunnel->dst_port;
if (tb_port_read(out, &dp_cap, TB_CFG_PORT,
out->cap_adap + DP_LOCAL_CAP, 1))
return;
......
......@@ -1462,6 +1462,11 @@ static int tb_xdomain_get_properties(struct tb_xdomain *xd)
tb_port_disable(port->dual_link_port);
}
dev_dbg(&xd->dev, "current link speed %u.0 Gb/s\n",
xd->link_speed);
dev_dbg(&xd->dev, "current link width %s\n",
tb_width_name(xd->link_width));
if (device_add(&xd->dev)) {
dev_err(&xd->dev, "failed to add XDomain device\n");
return -ENODEV;
......@@ -1895,6 +1900,50 @@ struct device_type tb_xdomain_type = {
};
EXPORT_SYMBOL_GPL(tb_xdomain_type);
static void tb_xdomain_link_init(struct tb_xdomain *xd, struct tb_port *down)
{
if (!down->dual_link_port)
return;
/*
* Gen 4 links come up already as bonded so only update the port
* structures here.
*/
if (tb_port_get_link_generation(down) >= 4) {
down->bonded = true;
down->dual_link_port->bonded = true;
} else {
xd->bonding_possible = true;
}
}
static void tb_xdomain_link_exit(struct tb_xdomain *xd)
{
struct tb_port *down = tb_xdomain_downstream_port(xd);
if (!down->dual_link_port)
return;
if (tb_port_get_link_generation(down) >= 4) {
down->bonded = false;
down->dual_link_port->bonded = false;
} else if (xd->link_width > TB_LINK_WIDTH_SINGLE) {
/*
* Just return port structures back to way they were and
* update credits. No need to update userspace because
* the XDomain is removed soon anyway.
*/
tb_port_lane_bonding_disable(down);
tb_port_update_credits(down);
} else if (down->dual_link_port) {
/*
* Re-enable the lane 1 adapter we disabled at the end
* of tb_xdomain_get_properties().
*/
tb_port_enable(down->dual_link_port);
}
}
/**
* tb_xdomain_alloc() - Allocate new XDomain object
* @tb: Domain where the XDomain belongs
......@@ -1945,7 +1994,8 @@ struct tb_xdomain *tb_xdomain_alloc(struct tb *tb, struct device *parent,
goto err_free_local_uuid;
} else {
xd->needs_uuid = true;
xd->bonding_possible = !!down->dual_link_port;
tb_xdomain_link_init(xd, down);
}
device_initialize(&xd->dev);
......@@ -2014,6 +2064,8 @@ void tb_xdomain_remove(struct tb_xdomain *xd)
device_for_each_child_reverse(&xd->dev, xd, unregister_service);
tb_xdomain_link_exit(xd);
/*
* Undo runtime PM here explicitly because it is possible that
* the XDomain was never added to the bus and thus device_del()
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment