Commit 21d375b6 authored by Andy Lutomirski's avatar Andy Lutomirski Committed by Thomas Gleixner

x86/entry/64: Remove the SYSCALL64 fast path

The SYCALLL64 fast path was a nice, if small, optimization back in the good
old days when syscalls were actually reasonably fast.  Now there is PTI to
slow everything down, and indirect branches are verboten, making everything
messier.  The retpoline code in the fast path is particularly nasty.

Just get rid of the fast path. The slow path is barely slower.

[ tglx: Split out the 'push all extra regs' part ]
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Acked-by: default avatarIngo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/462dff8d4d64dfbfc851fbf3130641809d980ecd.1517164461.git.luto@kernel.org
parent 9471eee9
......@@ -241,86 +241,11 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
TRACE_IRQS_OFF
/*
* If we need to do entry work or if we guess we'll need to do
* exit work, go straight to the slow path.
*/
movq PER_CPU_VAR(current_task), %r11
testl $_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
jnz entry_SYSCALL64_slow_path
entry_SYSCALL_64_fastpath:
/*
* Easy case: enable interrupts and issue the syscall. If the syscall
* needs pt_regs, we'll call a stub that disables interrupts again
* and jumps to the slow path.
*/
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
#if __SYSCALL_MASK == ~0
cmpq $__NR_syscall_max, %rax
#else
andl $__SYSCALL_MASK, %eax
cmpl $__NR_syscall_max, %eax
#endif
ja 1f /* return -ENOSYS (already in pt_regs->ax) */
movq %r10, %rcx
/*
* This call instruction is handled specially in stub_ptregs_64.
* It might end up jumping to the slow path. If it jumps, RAX
* and all argument registers are clobbered.
*/
#ifdef CONFIG_RETPOLINE
movq sys_call_table(, %rax, 8), %rax
call __x86_indirect_thunk_rax
#else
call *sys_call_table(, %rax, 8)
#endif
.Lentry_SYSCALL_64_after_fastpath_call:
movq %rax, RAX(%rsp)
1:
/*
* If we get here, then we know that pt_regs is clean for SYSRET64.
* If we see that no exit work is required (which we are required
* to check with IRQs off), then we can go straight to SYSRET64.
*/
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
movq PER_CPU_VAR(current_task), %r11
testl $_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
jnz 1f
LOCKDEP_SYS_EXIT
TRACE_IRQS_ON /* user mode is traced as IRQs on */
movq RIP(%rsp), %rcx
movq EFLAGS(%rsp), %r11
addq $6*8, %rsp /* skip extra regs -- they were preserved */
UNWIND_HINT_EMPTY
jmp .Lpop_c_regs_except_rcx_r11_and_sysret
1:
/*
* The fast path looked good when we started, but something changed
* along the way and we need to switch to the slow path. Calling
* raise(3) will trigger this, for example. IRQs are off.
*/
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_ANY)
SAVE_EXTRA_REGS
movq %rsp, %rdi
call syscall_return_slowpath /* returns with IRQs disabled */
jmp return_from_SYSCALL_64
entry_SYSCALL64_slow_path:
/* IRQs are off. */
SAVE_EXTRA_REGS
movq %rsp, %rdi
call do_syscall_64 /* returns with IRQs disabled */
return_from_SYSCALL_64:
TRACE_IRQS_IRETQ /* we're about to change IF */
/*
......@@ -393,7 +318,6 @@ syscall_return_via_sysret:
/* rcx and r11 are already restored (see code above) */
UNWIND_HINT_EMPTY
POP_EXTRA_REGS
.Lpop_c_regs_except_rcx_r11_and_sysret:
popq %rsi /* skip r11 */
popq %r10
popq %r9
......@@ -424,47 +348,6 @@ syscall_return_via_sysret:
USERGS_SYSRET64
END(entry_SYSCALL_64)
ENTRY(stub_ptregs_64)
/*
* Syscalls marked as needing ptregs land here.
* If we are on the fast path, we need to save the extra regs,
* which we achieve by trying again on the slow path. If we are on
* the slow path, the extra regs are already saved.
*
* RAX stores a pointer to the C function implementing the syscall.
* IRQs are on.
*/
cmpq $.Lentry_SYSCALL_64_after_fastpath_call, (%rsp)
jne 1f
/*
* Called from fast path -- disable IRQs again, pop return address
* and jump to slow path
*/
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
popq %rax
UNWIND_HINT_REGS extra=0
jmp entry_SYSCALL64_slow_path
1:
JMP_NOSPEC %rax /* Called from C */
END(stub_ptregs_64)
.macro ptregs_stub func
ENTRY(ptregs_\func)
UNWIND_HINT_FUNC
leaq \func(%rip), %rax
jmp stub_ptregs_64
END(ptregs_\func)
.endm
/* Instantiate ptregs_stub for each ptregs-using syscall */
#define __SYSCALL_64_QUAL_(sym)
#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_stub sym
#define __SYSCALL_64(nr, sym, qual) __SYSCALL_64_QUAL_##qual(sym)
#include <asm/syscalls_64.h>
/*
* %rdi: prev task
* %rsi: next task
......
......@@ -7,14 +7,11 @@
#include <asm/asm-offsets.h>
#include <asm/syscall.h>
#define __SYSCALL_64_QUAL_(sym) sym
#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_##sym
#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long __SYSCALL_64_QUAL_##qual(sym)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
#include <asm/syscalls_64.h>
#undef __SYSCALL_64
#define __SYSCALL_64(nr, sym, qual) [nr] = __SYSCALL_64_QUAL_##qual(sym),
#define __SYSCALL_64(nr, sym, qual) [nr] = sym,
extern long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment