Commit 222c402a authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman

staging: comedi: comedi.h: remove SDF_MODE0 etc.

The macros `SDF_MODE0`, `SDF_MODE1`, `SDF_MODE2`, `SDF_MODE3`, and
`SDF_MODE4` are COMEDI subdevice flags originally associated with the
obsolete (and no longer present) COMEDI "trigger" functionality.  They
have been of no use since COMEDI release 0.7.61 back in November 2001.
Since they were going spare, a couple of them have been aliased as
`SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE` to mean other things.  Remove
the obsolete macros and redefine `SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE`
as equivalent numeric values.

Some code distributed with the userspace COMEDILIB library uses the
`SDF_MODE0` etc. flags to display the fact that they are set, but
COMEDILIB uses and installs its own, compatible version of "comedi.h"
anyway so isn't affected by their removal from the kernel copy.
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 75aa1ca7
...@@ -183,11 +183,8 @@ ...@@ -183,11 +183,8 @@
#define SDF_MAXDATA 0x0010 /* maxdata depends on channel */ #define SDF_MAXDATA 0x0010 /* maxdata depends on channel */
#define SDF_FLAGS 0x0020 /* flags depend on channel */ #define SDF_FLAGS 0x0020 /* flags depend on channel */
#define SDF_RANGETYPE 0x0040 /* range type depends on channel */ #define SDF_RANGETYPE 0x0040 /* range type depends on channel */
#define SDF_MODE0 0x0080 /* can do mode 0 */ #define SDF_PWM_COUNTER 0x0080 /* PWM can automatically switch off */
#define SDF_MODE1 0x0100 /* can do mode 1 */ #define SDF_PWM_HBRIDGE 0x0100 /* PWM is signed (H-bridge) */
#define SDF_MODE2 0x0200 /* can do mode 2 */
#define SDF_MODE3 0x0400 /* can do mode 3 */
#define SDF_MODE4 0x0800 /* can do mode 4 */
#define SDF_CMD 0x1000 /* can do commands (deprecated) */ #define SDF_CMD 0x1000 /* can do commands (deprecated) */
#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */ #define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
#define SDF_CMD_WRITE 0x4000 /* can do output commands */ #define SDF_CMD_WRITE 0x4000 /* can do output commands */
...@@ -210,9 +207,6 @@ ...@@ -210,9 +207,6 @@
#define SDF_RUNNING 0x08000000 /* subdevice is acquiring data */ #define SDF_RUNNING 0x08000000 /* subdevice is acquiring data */
#define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */ #define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */
#define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */ #define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */
/* re recycle these flags for PWM */
#define SDF_PWM_COUNTER SDF_MODE0 /* PWM can automatically switch off */
#define SDF_PWM_HBRIDGE SDF_MODE1 /* PWM is signed (H-bridge) */
/* subdevice types */ /* subdevice types */
...@@ -730,17 +724,9 @@ struct comedi_krange { ...@@ -730,17 +724,9 @@ struct comedi_krange {
* *
* %SDF_RANGETYPE - range types are channel-specific. * %SDF_RANGETYPE - range types are channel-specific.
* *
* %SDF_MODE0 (aliased as %SDF_PWM_COUNTER) - the subdevice can do mode 0 (?) * %SDF_PWM_COUNTER - PWM can switch off automatically.
* or PWM can switch off automatically.
* *
* %SDF_MODE1 (aliased as %SDF_PWM_HBRIDGE) - the subdevice can do mode 1 (?) * %SDF_PWM_HBRIDGE - or PWM is signed (H-bridge).
* or PWM is signed (H-bridge).
*
* %SDF_MODE2 - the subdevice can do mode 2 (?).
*
* %SDF_MODE3 - the subdevice can do mode 3 (?).
*
* %SDF_MODE4 - the subdevice can do mode 4 (?).
* *
* %SDF_CMD - the subdevice supports asynchronous commands. * %SDF_CMD - the subdevice supports asynchronous commands.
* *
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment