Merge tag 'omap-for-v3.19/w1-and-l3-noc' of...

Merge tag 'omap-for-v3.19/w1-and-l3-noc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

Pull "omap driver changes for v3.19" from Tony Lindgren:

Few omap driver changes to add minimal device tree support
for the omap 1w driver, and to fix resume and interrupt issues
on the l3-noc driver.

* tag 'omap-for-v3.19/w1-and-l3-noc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: omap_l3_noc: Correct returning IRQ_HANDLED unconditionally in the irq handler
  bus: omap_l3_noc: Add resume hook to restore context
  w1: omap-hdq: support device probing with device-tree
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/w1/omap-hdq.txt

+* OMAP HDQ One wire bus master controller
+
+Required properties:
+- compatible : should be "ti,omap3-1w"
+- reg : Address and length of the register set for the device
+- interrupts : interrupt line.
+- ti,hwmods : "hdq1w"
+
+Example:
+
+- From omap3.dtsi
+  hdqw1w: 1w@480b2000 {
+	compatible = "ti,omap3-1w";
+	reg = <0x480b2000 0x1000>;
+	interrupts = <58>;
+	ti,hwmods = "hdq1w";
+  };

drivers/bus/omap_l3_noc.c

@@ -222,10 +222,14 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 			}
 
 			/* Error found so break the for loop */
-			break;
+			return IRQ_HANDLED;
 		}
 	}
-	return IRQ_HANDLED;
+
+	dev_err(l3->dev, "L3 %s IRQ not handled!!\n",
+		inttype ? "debug" : "application");
+
+	return IRQ_NONE;
 }
 
 static const struct of_device_id l3_noc_match[] = {
@@ -296,11 +300,66 @@ static int omap_l3_probe(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef	CONFIG_PM
+
+/**
+ * l3_resume_noirq() - resume function for l3_noc
+ * @dev:	pointer to l3_noc device structure
+ *
+ * We only have the resume handler only since we
+ * have already maintained the delta register
+ * configuration as part of configuring the system
+ */
+static int l3_resume_noirq(struct device *dev)
+{
+	struct omap_l3 *l3 = dev_get_drvdata(dev);
+	int i;
+	struct l3_flagmux_data *flag_mux;
+	void __iomem *base, *mask_regx = NULL;
+	u32 mask_val;
+
+	for (i = 0; i < l3->num_modules; i++) {
+		base = l3->l3_base[i];
+		flag_mux = l3->l3_flagmux[i];
+		if (!flag_mux->mask_app_bits && !flag_mux->mask_dbg_bits)
+			continue;
+
+		mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
+			   (L3_APPLICATION_ERROR << 3);
+		mask_val = readl_relaxed(mask_regx);
+		mask_val &= ~(flag_mux->mask_app_bits);
+
+		writel_relaxed(mask_val, mask_regx);
+		mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
+			   (L3_DEBUG_ERROR << 3);
+		mask_val = readl_relaxed(mask_regx);
+		mask_val &= ~(flag_mux->mask_dbg_bits);
+
+		writel_relaxed(mask_val, mask_regx);
+	}
+
+	/* Dummy read to force OCP barrier */
+	if (mask_regx)
+		(void)readl(mask_regx);
+
+	return 0;
+}
+
+static const struct dev_pm_ops l3_dev_pm_ops = {
+	.resume_noirq		= l3_resume_noirq,
+};
+
+#define L3_DEV_PM_OPS (&l3_dev_pm_ops)
+#else
+#define L3_DEV_PM_OPS NULL
+#endif
+
 static struct platform_driver omap_l3_driver = {
 	.probe		= omap_l3_probe,
 	.driver		= {
 		.name		= "omap_l3_noc",
 		.owner		= THIS_MODULE,
+		.pm		= L3_DEV_PM_OPS,
 		.of_match_table = of_match_ptr(l3_noc_match),
 	},
 };

drivers/w1/masters/omap_hdq.c

@@ -72,11 +72,18 @@ struct hdq_data {
 static int omap_hdq_probe(struct platform_device *pdev);
 static int omap_hdq_remove(struct platform_device *pdev);
 
+static struct of_device_id omap_hdq_dt_ids[] = {
+	{ .compatible = "ti,omap3-1w" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_hdq_dt_ids);
+
 static struct platform_driver omap_hdq_driver = {
 	.probe =	omap_hdq_probe,
 	.remove =	omap_hdq_remove,
 	.driver =	{
 		.name =	"omap_hdq",
+		.of_match_table = omap_hdq_dt_ids,
 	},
 };