Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...

Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - linksys,nslu2
+          - const: intel,ixp42x
+      - items:
+          - enum:
+              - gateworks,gw2358
+          - const: intel,ixp43x

Documentation/devicetree/bindings/bus/ti-sysc.txt

@@ -94,6 +94,8 @@ Optional properties:
 
 - ti,no-idle-on-init	interconnect target module should not be idled at init
 
+- ti,no-idle		interconnect target module should not be idled
+
 Example: Single instance of MUSB controller on omap4 using interconnect ranges
 using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
 
@@ -131,6 +133,6 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
 		};
 	};
 
-Note that other SoCs, such as am335x can have multipe child devices. On am335x
+Note that other SoCs, such as am335x can have multiple child devices. On am335x
 there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
-instance as children of a single interconnet target module.
+instance as children of a single interconnect target module.

Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx Network Processing Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
+  processor that can load a firmware to perform offloading of networking
+  and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
+  on the IXP4xx platform. All IXP4xx platforms have three NPEs at
+  consecutive memory locations. They are all included in the same
+  device node since they are not independent of each other.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: intel,ixp4xx-network-processing-engine
+
+  reg:
+    minItems: 3
+    maxItems: 3
+    items:
+      - description: NPE0 register range
+      - description: NPE1 register range
+      - description: NPE2 register range
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    npe@c8006000 {
+         compatible = "intel,ixp4xx-network-processing-engine";
+         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+    };

Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx XScale Networking Processors Interrupt Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This interrupt controller is found in the Intel IXP4xx processors.
+  Some processors have 32 interrupts, some have up to 64 interrupts.
+  The exact number of interrupts is determined from the compatible
+  string.
+
+  The distinct IXP4xx families with different interrupt controller
+  variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four
+  families were the only ones to reach the developer and consumer
+  market.
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - intel,ixp42x-interrupt
+        - intel,ixp43x-interrupt
+        - intel,ixp45x-interrupt
+        - intel,ixp46x-interrupt
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    intcon: interrupt-controller@c8003000 {
+        compatible = "intel,ixp43x-interrupt";
+        reg = <0xc8003000 0x100>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };

Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx AHB Queue Manager
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The IXP4xx AHB Queue Manager maintains queues as circular buffers in
+  an 8KB embedded SRAM along with hardware pointers. It is used by both
+  the XScale processor and the NPEs (Network Processing Units) in the
+  IXP4xx for accelerating queues, especially for networking. Clients pick
+  queues from the queue manager with foo-queue = <&qmgr N> where the
+  &qmgr is a phandle to the queue manager and N is the queue resource
+  number. The queue resources available and their specific purpose
+  on a certain IXP4xx system will vary.
+
+properties:
+  compatible:
+    items:
+      - const: intel,ixp4xx-ahb-queue-manager
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for queues 0-31
+      - description: Interrupt for queues 32-63
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qmgr: queue-manager@60000000 {
+         compatible = "intel,ixp4xx-ahb-queue-manager";
+         reg = <0x60000000 0x4000>;
+         interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+    };

Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/intel-ixp4xx-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx XScale Networking Processors Timers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the Intel IXP4xx processors.
+
+properties:
+  compatible:
+    items:
+      - const: intel,ixp4xx-timer
+
+  reg:
+    description: Should contain registers location and length
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Timer 1 interrupt
+      - description: Timer 2 interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    timer@c8005000 {
+        compatible = "intel,ixp4xx-timer";
+        reg = <0xc8005000 0x100>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+    };

MAINTAINERS

@@ -1733,11 +1733,21 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
 ARM/INTEL IXP4XX ARM ARCHITECTURE
+M:	Linus Walleij <linusw@kernel.org>
 M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khalasa@piap.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+F:	Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
 F:	arch/arm/mach-ixp4xx/
+F:	drivers/clocksource/timer-ixp4xx.c
+F:	drivers/gpio/gpio-ixp4xx.c
+F:	drivers/irqchip/irq-ixp4xx.c
+F:	include/linux/irqchip/irq-ixp4xx.h
+F:	include/linux/platform_data/timer-ixp4xx.h
 
 ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
 M:	Jonathan Cameron <jic23@cam.ac.uk>
@@ -2238,6 +2248,7 @@ F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
 F:	arch/arm/configs/socfpga_defconfig
 F:	arch/arm64/boot/dts/altera/
+F:	arch/arm64/boot/dts/intel/
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
@@ -7990,10 +8001,10 @@ F:	Documentation/media/v4l-drivers/ipu3.rst
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
 S:	Maintained
-F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
-F:	arch/arm/mach-ixp4xx/include/mach/npe.h
-F:	arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-F:	arch/arm/mach-ixp4xx/ixp4xx_npe.c
+F:	include/linux/soc/ixp4xx/qmgr.h
+F:	include/linux/soc/ixp4xx/npe.h
+F:	drivers/soc/ixp4xx/ixp4xx-qmgr.c
+F:	drivers/soc/ixp4xx/ixp4xx-npe.c
 F:	drivers/net/ethernet/xscale/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
@@ -15654,7 +15665,7 @@ F:	include/linux/clk/ti.h
 
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
-M:	Kevin Hilman <khilman@kernel.org>
+R:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported

arch/arm/Kconfig

@@ -426,12 +426,15 @@ config ARCH_IXP4XX
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
+	select GPIO_IXP4XX
 	select GPIOLIB
 	select HAVE_PCI
+	select IXP4XX_IRQ
+	select IXP4XX_TIMER
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -897,8 +900,6 @@ config PLAT_PXA
 config PLAT_VERSATILE
 	bool
 
-source "arch/arm/firmware/Kconfig"
-
 source "arch/arm/mm/Kconfig"
 
 config IWMMXT

arch/arm/Kconfig.debug

@@ -1676,6 +1676,7 @@ config DEBUG_UART_PHYS
 	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
 	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2
+	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
@@ -1727,6 +1728,7 @@ config DEBUG_UART_VIRT
 	default 0xe0010fe0 if ARCH_RPC
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0010000 if DEBUG_ASM9260_UART
+	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
 	default 0xf1000300 if DEBUG_BCM_5301X

arch/arm/Makefile

@@ -290,7 +290,6 @@ core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= arch/arm/probes/
 core-y				+= arch/arm/net/
 core-y				+= arch/arm/crypto/
-core-y				+= arch/arm/firmware/
 core-y				+= $(machdirs) $(platdirs)
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/

arch/arm/boot/dts/Makefile

@@ -229,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorcp.dtb
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2hk-evm.dtb \
 	keystone-k2l-evm.dtb \

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi

@@ -88,6 +88,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 	};
 
@@ -99,6 +100,7 @@ reg_3v3: regulator-3v3 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 		regulator-always-on;
 	};
@@ -216,7 +218,7 @@ &ecspi1 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_enet>;

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -92,7 +92,7 @@ &clks {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -171,7 +171,7 @@ partition@3f0000 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6q-marsboard.dts

@@ -110,7 +110,7 @@ m25p80@0 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-tbs2910.dts

@@ -98,7 +98,7 @@ &audmux {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-apf6.dtsi

@@ -51,7 +51,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -292,7 +292,7 @@ &esai {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -202,7 +202,7 @@ flash: m25p80@0 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sr-som.dtsi

@@ -53,7 +53,7 @@ vcc_3v3: regulator-vcc-3v3 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -224,7 +224,7 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -75,7 +75,7 @@ &anaclk2 {
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -191,7 +191,7 @@ &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx7d-pico.dtsi

@@ -92,7 +92,7 @@ &fec1 {
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts

+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Linksys NSLU2
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
+	compatible = "linksys,nslu2", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-status {
+			label = "nslu2:red:status";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-ready {
+			label = "nslu2:green:ready";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-disk-1 {
+			label = "nslu2:green:disk-1";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-disk-2 {
+			label = "nslu2:green:disk-2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6f {
+			compatible = "xicor,x1205";
+			reg = <0x6f>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	/* The first 16MB region on the expansion bus */
+	flash@50000000 {
+		compatible = "intel,ixp4xx-flash", "cfi-flash";
+		bank-width = <2>;
+		/*
+		 * 8 MB of Flash in 0x20000 byte blocks
+		 * mapped in at 0x50000000
+		 */
+		reg = <0x50000000 0x800000>;
+
+		partitions {
+			compatible = "redboot-fis";
+			/* Eraseblock at 0x7e0000 */
+			fis-index-block = <0x3f>;
+		};
+	};
+};

arch/arm/boot/dts/intel-ixp42x.dtsi

+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 42x series. This series has 32 interrupts.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp42x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts

+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateworks IXP43x-based Cambria GW2358
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+
+/ {
+	model = "Gateworks Cambria GW2358";
+	compatible = "gateworks,gw2358", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2358:green:LED";
+			gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+		pld0: pld@56 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		/* This PLD just handles the LED and user button */
+		pld1: pld@57 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x57>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	flash@50000000 {
+		compatible = "intel,ixp4xx-flash", "cfi-flash";
+		bank-width = <2>;
+		/*
+		 * 32 MB of Flash in 0x20000 byte blocks
+		 * mapped in at 0x50000000
+		 */
+		reg = <0x50000000 0x2000000>;
+
+		partitions {
+			compatible = "redboot-fis";
+			/* Eraseblock at 0x1fe0000 */
+			fis-index-block = <0xff>;
+		};
+	};
+};

arch/arm/boot/dts/intel-ixp43x.dtsi

+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 43x series. This series has 64 interrupts and adds a few more
+ * peripherals over the 42x series.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+	};
+};

arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi

+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
+ * few more peripherals over the 42x and 43x series so this extends the
+ * basic IXP4xx DTSI.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@c8011000 {
+			compatible = "intel,ixp4xx-i2c";
+			reg = <0xc8011000 0x18>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/intel-ixp4xx.dtsi

+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 4xx series.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		qmgr: queue-manager@60000000 {
+			compatible = "intel,ixp4xx-ahb-queue-manager";
+			reg = <0x60000000 0x4000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@c8000000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8000000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		gpio0: gpio@c8004000 {
+			compatible = "intel,ixp4xx-gpio";
+			reg = <0xc8004000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		intcon: interrupt-controller@c8003000 {
+			/*
+			 * Note: no compatible string. The subvariant of the
+			 * chip needs to define what version it is. The
+			 * location of the interrupt controller is fixed in
+			 * memory across all variants.
+			 */
+			reg = <0xc8003000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@c8005000 {
+			compatible = "intel,ixp4xx-timer";
+			reg = <0xc8005000 0x100>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		npe@c8006000 {
+			compatible = "intel,ixp4xx-network-processing-engine";
+			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+		};
+	};
+};

arch/arm/boot/dts/ls1021a-twr.dts

@@ -145,7 +145,7 @@ dspiflash: s25fl064k@0 {
 };
 
 &enet0 {
-	tbi-handle = <&tbi1>;
+	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
 	phy-connection-type = "sgmii";
 	status = "okay";
@@ -225,6 +225,13 @@ rgmii_phy1: ethernet-phy@1 {
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
 	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
 	tbi1: tbi-phy@1f {
 		reg = <0x1f>;
 		device_type = "tbi-phy";

arch/arm/boot/dts/ls1021a.dtsi

@@ -729,7 +729,7 @@ dcu: dcu@2ce0000 {
 		};
 
 		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
+			compatible = "fsl,etsec2-mdio";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -737,6 +737,15 @@ mdio0: mdio@2d24000 {
 			      <0x0 0x2d10030 0x0 0x4>;
 		};
 
+		mdio1: mdio@2d64000 {
+			compatible = "fsl,etsec2-mdio";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
 		ptp_clock@2d10e00 {
 			compatible = "fsl,etsec-ptp";
 			reg = <0x0 0x2d10e00 0x0 0xb0>;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -169,6 +169,8 @@ nfc: nand@1c03000 {
 			clock-names = "ahb", "mod";
 			resets = <&ccu RST_BUS_NAND>;
 			reset-names = "ahb";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/configs/exynos_defconfig

@@ -9,7 +9,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_EXYNOS3=y
-CONFIG_EXYNOS5420_MCPM=y
 CONFIG_SMP=y
 CONFIG_BIG_LITTLE=y
 CONFIG_NR_CPUS=8

arch/arm/configs/multi_v7_defconfig

@@ -33,7 +33,6 @@ CONFIG_MACH_BERLIN_BG2CD=y
 CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_ARCH_DIGICOLOR=y
 CONFIG_ARCH_EXYNOS=y
-CONFIG_EXYNOS5420_MCPM=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_HI3xxx=y

arch/arm/firmware/Kconfig

-config ARCH_SUPPORTS_FIRMWARE
-	bool
-
-config ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
-	bool
-	select ARCH_SUPPORTS_FIRMWARE
-
-menu "Firmware options"
-	depends on ARCH_SUPPORTS_FIRMWARE
-
-config TRUSTED_FOUNDATIONS
-	bool "Trusted Foundations secure monitor support"
-	depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
-	default y
-	help
-	  Some devices (including most Tegra-based consumer devices on the
-	  market) are booted with the Trusted Foundations secure monitor
-	  active, requiring some core operations to be performed by the secure
-	  monitor instead of the kernel.
-
-	  This option allows the kernel to invoke the secure monitor whenever
-	  required on devices using Trusted Foundations. See
-	  arch/arm/include/asm/trusted_foundations.h or the
-	  tlm,trusted-foundations device tree binding documentation for details
-	  on how to use it.
-
-	  Say n if you don't know what this is about.
-
-endmenu

arch/arm/firmware/Makefile

-obj-$(CONFIG_TRUSTED_FOUNDATIONS)	+= trusted_foundations.o
-
-# tf_generic_smc() fails to build with -fsanitize-coverage=trace-pc
-KCOV_INSTRUMENT                := n

arch/arm/include/asm/firmware.h

@@ -24,7 +24,7 @@ struct firmware_ops {
 	/*
 	 * Inform the firmware we intend to enter CPU idle mode
 	 */
-	int (*prepare_idle)(void);
+	int (*prepare_idle)(unsigned long mode);
 	/*
 	 * Enters CPU idle mode
 	 */

arch/arm/mach-davinci/board-da830-evm.c

@@ -29,6 +29,7 @@
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/nvmem-provider.h>
 
@@ -53,14 +54,50 @@ static const short da830_evm_usb11_pins[] = {
 	-1
 };
 
-static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
+static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
+	REGULATOR_SUPPLY("vbus", NULL),
+};
+
+static struct regulator_init_data da830_evm_usb_vbus_data = {
+	.consumer_supplies	= da830_evm_usb_supplies,
+	.num_consumer_supplies	= ARRAY_SIZE(da830_evm_usb_supplies),
+};
+
+static struct fixed_voltage_config da830_evm_usb_vbus = {
+	.supply_name		= "vbus",
+	.microvolts		= 33000000,
+	.init_data		= &da830_evm_usb_vbus_data,
+};
+
+static struct platform_device da830_evm_usb_vbus_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &da830_evm_usb_vbus,
+	},
+};
+
+static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
 	.dev_id		= "ohci-da8xx",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+		{ }
 	},
 };
 
+static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
+	.dev_id		= "reg-fixed-voltage.0",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
+	&da830_evm_usb_oc_gpio_lookup,
+	&da830_evm_usb_vbus_gpio_lookup,
+};
+
 static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
 	/* TPS2065 switch @ 5V */
 	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
@@ -75,6 +112,9 @@ static __init void da830_evm_usb_init(void)
 		pr_warn("%s: USB PHY CLK registration failed: %d\n",
 			__func__, ret);
 
+	gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
+				ARRAY_SIZE(da830_evm_usb_gpio_lookups));
+
 	ret = da8xx_register_usb_phy();
 	if (ret)
 		pr_warn("%s: USB PHY registration failed: %d\n",
@@ -100,7 +140,11 @@ static __init void da830_evm_usb_init(void)
 		return;
 	}
 
-	gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup);
+	ret = platform_device_register(&da830_evm_usb_vbus_device);
+	if (ret) {
+		pr_warn("%s: Unable to register the vbus supply\n", __func__);
+		return;
+	}
 
 	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
 	if (ret)
@@ -156,6 +200,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-dm355-evm.c

@@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -21,6 +21,7 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
@@ -298,14 +299,50 @@ static const short da850_hawk_usb11_pins[] = {
 	-1
 };
 
-static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
+static struct regulator_consumer_supply hawk_usb_supplies[] = {
+	REGULATOR_SUPPLY("vbus", NULL),
+};
+
+static struct regulator_init_data hawk_usb_vbus_data = {
+	.consumer_supplies	= hawk_usb_supplies,
+	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
+};
+
+static struct fixed_voltage_config hawk_usb_vbus = {
+	.supply_name		= "vbus",
+	.microvolts		= 3300000,
+	.init_data		= &hawk_usb_vbus_data,
+};
+
+static struct platform_device hawk_usb_vbus_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &hawk_usb_vbus,
+	},
+};
+
+static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
 	.dev_id		= "ohci-da8xx",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+		{ }
 	},
 };
 
+static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
+	.dev_id		= "reg-fixed-voltage.0",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
+	&hawk_usb_oc_gpio_lookup,
+	&hawk_usb_vbus_gpio_lookup,
+};
+
 static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
 	/* TPS2087 switch @ 5V */
 	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
@@ -326,12 +363,19 @@ static __init void omapl138_hawk_usb_init(void)
 		pr_warn("%s: USB PHY CLK registration failed: %d\n",
 			__func__, ret);
 
+	gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
+				ARRAY_SIZE(hawk_usb_gpio_lookups));
+
 	ret = da8xx_register_usb_phy();
 	if (ret)
 		pr_warn("%s: USB PHY registration failed: %d\n",
 			__func__, ret);
 
-	gpiod_add_lookup_table(&hawk_usb_gpio_lookup);
+	ret = platform_device_register(&hawk_usb_vbus_device);
+	if (ret) {
+		pr_warn("%s: Unable to register the vbus supply\n", __func__);
+		return;
+	}
 
 	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
 	if (ret)

arch/arm/mach-ep93xx/adssphere.c

@@ -15,7 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/clock.c

@@ -20,8 +20,9 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/clkdev.h>
+#include <linux/soc/cirrus/ep93xx.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include <asm/div64.h>
 

arch/arm/mach-ep93xx/core.c

@@ -39,11 +39,13 @@
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/random.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <linux/platform_data/video-ep93xx.h>
 #include <linux/platform_data/keypad-ep93xx.h>
 #include <linux/platform_data/spi-ep93xx.h>
-#include <mach/gpio-ep93xx.h>
+#include <linux/soc/cirrus/ep93xx.h>
+
+#include "gpio-ep93xx.h"
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -123,7 +125,7 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 /**
  * ep93xx_chip_revision() - returns the EP93xx chip revision
  *
- * See <mach/platform.h> for more information.
+ * See "platform.h" for more information.
  */
 unsigned int ep93xx_chip_revision(void)
 {

arch/arm/mach-ep93xx/dma.c

@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 
 #include <linux/platform_data/dma-ep93xx.h>
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include "soc.h"
 

arch/arm/mach-ep93xx/edb93xx.c

@@ -33,10 +33,10 @@
 
 #include <sound/cs4271.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <linux/platform_data/video-ep93xx.h>
 #include <linux/platform_data/spi-ep93xx.h>
-#include <mach/gpio-ep93xx.h>
+#include "gpio-ep93xx.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/gesbc9312.c

@@ -15,7 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/include/mach/hardware.h → arch/arm/mach-ep93xx/hardware.h

@@ -6,7 +6,7 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * The EP93xx has two external crystal oscillators.  To generate the

arch/arm/mach-ep93xx/micro9.c

@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/include/mach/platform.h → arch/arm/mach-ep93xx/platform.h

@@ -5,6 +5,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/platform_data/eth-ep93xx.h>
 #include <linux/reboot.h>
 
 struct device;
@@ -15,23 +16,9 @@ struct ep93xxfb_mach_info;
 struct ep93xx_keypad_platform_data;
 struct ep93xx_spi_info;
 
-struct ep93xx_eth_data
-{
-	unsigned char	dev_addr[6];
-	unsigned char	phy_id;
-};
-
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 
-#define EP93XX_CHIP_REV_D0	3
-#define EP93XX_CHIP_REV_D1	4
-#define EP93XX_CHIP_REV_E0	5
-#define EP93XX_CHIP_REV_E1	6
-#define EP93XX_CHIP_REV_E2	7
-
-unsigned int ep93xx_chip_revision(void);
-
 void ep93xx_register_flash(unsigned int width,
 			   resource_size_t start, resource_size_t size);
 
@@ -41,19 +28,11 @@ void ep93xx_register_spi(struct ep93xx_spi_info *info,
 			 struct spi_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
-void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
-void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_register_i2s(void);
-int ep93xx_i2s_acquire(void);
-void ep93xx_i2s_release(void);
 void ep93xx_register_ac97(void);
 void ep93xx_register_ide(void);
 void ep93xx_register_adc(void);
-int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
-void ep93xx_ide_release_gpio(struct platform_device *pdev);
 
 struct device *ep93xx_init_devices(void);
 extern void ep93xx_timer_init(void);

arch/arm/mach-ep93xx/simone.c

@@ -27,8 +27,8 @@
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 
-#include <mach/hardware.h>
-#include <mach/gpio-ep93xx.h>
+#include "hardware.h"
+#include "gpio-ep93xx.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/snappercl15.c

@@ -25,9 +25,9 @@
 
 #include <linux/mtd/platnand.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <linux/platform_data/video-ep93xx.h>
-#include <mach/gpio-ep93xx.h>
+#include "gpio-ep93xx.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-ep93xx/ts72xx.c

@@ -24,8 +24,8 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <linux/gpio/machine.h>
 
-#include <mach/gpio-ep93xx.h>
-#include <mach/hardware.h>
+#include "gpio-ep93xx.h"
+#include "hardware.h"
 #include <mach/irqs.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -31,10 +31,10 @@
 
 #include <sound/cs4271.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <linux/platform_data/video-ep93xx.h>
 #include <linux/platform_data/spi-ep93xx.h>
-#include <mach/gpio-ep93xx.h>
+#include "gpio-ep93xx.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>

arch/arm/mach-exynos/Kconfig

@@ -106,21 +106,15 @@ config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y
 	depends on ARCH_EXYNOS5
+	select MCPM if SMP
+	select ARM_CCI400_PORT_CTRL
+	select ARM_CPU_SUSPEND
 
 config SOC_EXYNOS5800
 	bool "SAMSUNG EXYNOS5800"
 	default y
 	depends on SOC_EXYNOS5420
 
-config EXYNOS5420_MCPM
-	bool "Exynos5420 Multi-Cluster PM support"
-	depends on MCPM && SOC_EXYNOS5420
-	select ARM_CCI400_PORT_CTRL
-	select ARM_CPU_SUSPEND
-	help
-	  This is needed to provide CPU and cluster power management
-	  on Exynos5420 implementing big.LITTLE.
-
 config EXYNOS_CPU_SUSPEND
 	bool
 	select ARM_CPU_SUSPEND

arch/arm/mach-exynos/Makefile

@@ -18,5 +18,5 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 AFLAGS_sleep.o			:=-Wa,-march=armv7-a$(plus_sec)
 
-obj-$(CONFIG_EXYNOS5420_MCPM)	+= mcpm-exynos.o
+obj-$(CONFIG_MCPM)		+= mcpm-exynos.o
 CFLAGS_mcpm-exynos.o		+= -march=armv7-a

arch/arm/mach-exynos/common.h

@@ -91,6 +91,7 @@ extern u32 cp15_save_power;
 
 extern void __iomem *sysram_ns_base_addr;
 extern void __iomem *sysram_base_addr;
+extern phys_addr_t sysram_base_phys;
 extern void __iomem *pmu_base_addr;
 void exynos_sysram_init(void);
 

arch/arm/mach-exynos/exynos.c

@@ -33,6 +33,7 @@ static struct platform_device exynos_cpuidle = {
 };
 
 void __iomem *sysram_base_addr __ro_after_init;
+phys_addr_t sysram_base_phys __ro_after_init;
 void __iomem *sysram_ns_base_addr __ro_after_init;
 
 void __init exynos_sysram_init(void)
@@ -43,6 +44,8 @@ void __init exynos_sysram_init(void)
 		if (!of_device_is_available(node))
 			continue;
 		sysram_base_addr = of_iomap(node, 0);
+		sysram_base_phys = of_translate_address(node,
+					   of_get_address(node, 0, NULL, NULL));
 		break;
 	}
 

arch/arm/mach-exynos/firmware.c

@@ -196,6 +196,7 @@ bool __init exynos_secure_firmware_available(void)
 		return false;
 
 	addr = of_get_address(nd, 0, NULL, NULL);
+	of_node_put(nd);
 	if (!addr) {
 		pr_err("%s: No address specified.\n", __func__);
 		return false;

arch/arm/mach-exynos/mcpm-exynos.c

@@ -75,14 +75,25 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 		 */
 		if (cluster &&
 		    cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+			unsigned int timeout = 16;
+
 			/*
 			 * Before we reset the Little cores, we should wait
 			 * the SPARE2 register is set to 1 because the init
 			 * codes of the iROM will set the register after
 			 * initialization.
 			 */
-			while (!pmu_raw_readl(S5P_PMU_SPARE2))
+			while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
+				timeout--;
 				udelay(10);
+			}
+
+			if (timeout == 0) {
+				pr_err("cpu %u cluster %u powerup failed\n",
+				       cpu, cluster);
+				exynos_cpu_power_down(cpunr);
+				return -ETIMEDOUT;
+			}
 
 			pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
 					EXYNOS_SWRESET);

arch/arm/mach-exynos/platsmp.c

@@ -214,13 +214,20 @@ static inline void __iomem *cpu_boot_reg(int cpu)
  */
 void exynos_core_restart(u32 core_id)
 {
+	unsigned int timeout = 16;
 	u32 val;
 
 	if (!of_machine_is_compatible("samsung,exynos3250"))
 		return;
 
-	while (!pmu_raw_readl(S5P_PMU_SPARE2))
+	while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
+		timeout--;
 		udelay(10);
+	}
+	if (timeout == 0) {
+		pr_err("cpu core %u restart failed\n", core_id);
+		return;
+	}
 	udelay(10);
 
 	val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));

arch/arm/mach-exynos/smc.h

@@ -25,6 +25,13 @@
 #define SMC_CMD_L2X0INVALL	(-24)
 #define SMC_CMD_L2X0DEBUG	(-25)
 
+/* For Accessing CP15/SFR (General) */
+#define SMC_CMD_REG		(-101)
+
+/* defines for SMC_CMD_REG */
+#define SMC_REG_CLASS_SFR_W	(0x1 << 30)
+#define SMC_REG_ID_SFR_W(addr)	(SMC_REG_CLASS_SFR_W | ((addr) >> 2))
+
 #ifndef __ASSEMBLY__
 
 extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3);

arch/arm/mach-exynos/suspend.c

@@ -31,6 +31,7 @@
 #include <asm/suspend.h>
 
 #include "common.h"
+#include "smc.h"
 
 #define REG_TABLE_END (-1U)
 
@@ -62,6 +63,8 @@ struct exynos_pm_state {
 	int cpu_state;
 	unsigned int pmu_spare3;
 	void __iomem *sysram_base;
+	phys_addr_t sysram_phys;
+	bool secure_firmware;
 };
 
 static const struct exynos_pm_data *pm_data __ro_after_init;
@@ -265,9 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 
-	writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
-
-	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
+	if (IS_ENABLED(CONFIG_MCPM)) {
 		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
 		mcpm_cpu_suspend();
 	}
@@ -341,11 +342,16 @@ static void exynos5420_pm_prepare(void)
 	 */
 	pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
 					   EXYNOS5420_CPU_STATE);
+	writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
+	if (pm_state.secure_firmware)
+		exynos_smc(SMC_CMD_REG, SMC_REG_ID_SFR_W(pm_state.sysram_phys +
+							 EXYNOS5420_CPU_STATE),
+			   0, 0);
 
 	exynos_pm_enter_sleep_mode();
 
 	/* ensure at least INFORM0 has the resume address */
-	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+	if (IS_ENABLED(CONFIG_MCPM))
 		pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
 
 	tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
@@ -444,8 +450,27 @@ static void exynos3250_pm_resume(void)
 
 static void exynos5420_prepare_pm_resume(void)
 {
-	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+	unsigned int mpidr, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	if (IS_ENABLED(CONFIG_MCPM))
 		WARN_ON(mcpm_cpu_powered_up());
+
+	if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
+		/*
+		 * When system is resumed on the LITTLE/KFC core (cluster 1),
+		 * the DSCR is not properly updated until the power is turned
+		 * on also for the cluster 0. Enable it for a while to
+		 * propagate the SPNIDEN and SPIDEN signals from Secure JTAG
+		 * block and avoid undefined instruction issue on CP14 reset.
+		 */
+		pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+				EXYNOS_COMMON_CONFIGURATION(0));
+		pmu_raw_writel(0,
+				EXYNOS_COMMON_CONFIGURATION(0));
+	}
 }
 
 static void exynos5420_pm_resume(void)
@@ -460,6 +485,11 @@ static void exynos5420_pm_resume(void)
 	/* Restore the sysram cpu state register */
 	writel_relaxed(pm_state.cpu_state,
 		       pm_state.sysram_base + EXYNOS5420_CPU_STATE);
+	if (pm_state.secure_firmware)
+		exynos_smc(SMC_CMD_REG,
+			   SMC_REG_ID_SFR_W(pm_state.sysram_phys +
+					    EXYNOS5420_CPU_STATE),
+			   EXYNOS_AFTR_MAGIC, 0);
 
 	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
 			S5P_CENTRAL_SEQ_OPTION);
@@ -639,8 +669,10 @@ void __init exynos_pm_init(void)
 
 	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
+		of_node_put(np);
 		return;
 	}
+	of_node_put(np);
 
 	pm_data = (const struct exynos_pm_data *) match->data;
 
@@ -659,8 +691,11 @@ void __init exynos_pm_init(void)
 	 * Applicable as of now only to Exynos542x. If booted under secure
 	 * firmware, the non-secure region of sysram should be used.
 	 */
-	if (exynos_secure_firmware_available())
+	if (exynos_secure_firmware_available()) {
+		pm_state.sysram_phys = sysram_base_phys;
 		pm_state.sysram_base = sysram_ns_base_addr;
-	else
+		pm_state.secure_firmware = true;
+	} else {
 		pm_state.sysram_base = sysram_base_addr;
+	}
 }

arch/arm/mach-imx/pm-imx6.c

@@ -354,9 +354,11 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 	 *
 	 * Note that IRQ #32 is GIC SPI #0.
 	 */
-	imx_gpc_hwirq_unmask(0);
+	if (mode != WAIT_CLOCKED)
+		imx_gpc_hwirq_unmask(0);
 	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_hwirq_mask(0);
+	if (mode != WAIT_CLOCKED)
+		imx_gpc_hwirq_mask(0);
 
 	return 0;
 }

arch/arm/mach-ixp4xx/Kconfig

@@ -4,6 +4,20 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
+config MACH_IXP4XX_OF
+	bool
+	prompt "Devce Tree IXP4xx boards"
+	default y
+	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select I2C
+	select I2C_IOP3XX
+	select PCI
+	select SERIAL_OF_PLATFORM
+	select TIMER_OF
+	select USE_OF
+	help
+	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
+
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
@@ -222,19 +236,6 @@ config IXP4XX_INDIRECT_PCI
 	  need to use the indirect method instead. If you don't know
 	  what you need, leave this option unselected.
 
-config IXP4XX_QMGR
-	tristate "IXP4xx Queue Manager support"
-	help
-	  This driver supports IXP4xx built-in hardware queue manager
-	  and is automatically selected by Ethernet and HSS drivers.
-
-config IXP4XX_NPE
-	tristate "IXP4xx Network Processor Engine support"
-	select FW_LOADER
-	help
-	  This driver supports IXP4xx built-in network coprocessors
-	  and is automatically selected by Ethernet and HSS drivers.
-
 endmenu
 
 endif

arch/arm/mach-ixp4xx/Makefile

@@ -6,6 +6,9 @@
 obj-pci-y	:=
 obj-pci-n	:=
 
+# Device tree platform
+obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
+
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
@@ -40,5 +43,3 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
-obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-obj-$(CONFIG_IXP4XX_NPE)	+= ixp4xx_npe.o

arch/arm/mach-ixp4xx/avila-pci.c

@@ -27,6 +27,8 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define AVILA_MAX_DEV	4
 #define LOFT_MAX_DEV	6
 #define IRQ_LINES	4

arch/arm/mach-ixp4xx/avila-setup.c

@@ -28,6 +28,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define AVILA_SDA_PIN	7
 #define AVILA_SCL_PIN	6
 

arch/arm/mach-ixp4xx/coyote-pci.c

@@ -23,6 +23,8 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 #define SLOT0_DEVID	14
 #define SLOT1_DEVID	15
 

arch/arm/mach-ixp4xx/coyote-setup.c

@@ -25,6 +25,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
 #define COYOTE_IDE_BASE_VIRT	0xFFFE1000
 #define COYOTE_IDE_REGION_SIZE	0x1000

arch/arm/mach-ixp4xx/dsmg600-pci.c

@@ -22,6 +22,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		4
 #define IRQ_LINES	3
 

arch/arm/mach-ixp4xx/dsmg600-setup.c

@@ -35,6 +35,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
+#include "irqs.h"
+
 #define DSMG600_SDA_PIN		5
 #define DSMG600_SCL_PIN		4
 
@@ -268,9 +270,6 @@ static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
 
-	/* Make sure that GPIO14 and GPIO15 are not used as clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
 	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	dsmg600_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

arch/arm/mach-ixp4xx/fsg-pci.c

@@ -22,6 +22,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 

arch/arm/mach-ixp4xx/fsg-setup.c

@@ -29,6 +29,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define FSG_SDA_PIN		12
 #define FSG_SCL_PIN		13
 

arch/arm/mach-ixp4xx/gateway7001-pci.c

@@ -27,6 +27,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init gateway7001_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);

arch/arm/mach-ixp4xx/gateway7001-setup.c

@@ -28,6 +28,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 static struct flash_platform_data gateway7001_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,

arch/arm/mach-ixp4xx/gtwx5715-pci.c

@@ -30,6 +30,8 @@
 #include <mach/hardware.h>
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 #define SLOT0_DEVID	0
 #define SLOT1_DEVID	1
 #define INTA		10 /* slot 1 has INTA and INTB crossed */

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -36,6 +36,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 /* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
    and operate as an SPI type interface.  The details of the interface
    are available on Kendin/Micrel's web site. */

arch/arm/mach-ixp4xx/include/mach/entry-macro.S

-/*
- * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get interrupts
-		cmp	\irqstat, #0
-		beq	1001f				@ upper IRQ?
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		sub     \irqnr, \base, \irqnr
-		b	1002f				@ lower IRQ being
-							@ handled
-
-1001:
-		/*
-		 * IXP465/IXP435 has an upper IRQ status register
-		 */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get upper interrupts
-		mov	\irqnr, #63
-		clz	\irqstat, \irqstat
- 		cmp	\irqstat, #32
-		subne	\irqnr, \irqnr, \irqstat
-#endif
-1002:
-		.endm
-
-

arch/arm/mach-ixp4xx/include/mach/irqs.h

-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_NPEA		0
-#define IRQ_IXP4XX_NPEB		1
-#define IRQ_IXP4XX_NPEC		2
-#define IRQ_IXP4XX_QM1		3
-#define IRQ_IXP4XX_QM2		4
-#define IRQ_IXP4XX_TIMER1	5
-#define IRQ_IXP4XX_GPIO0	6
-#define IRQ_IXP4XX_GPIO1	7
-#define IRQ_IXP4XX_PCI_INT	8
-#define IRQ_IXP4XX_PCI_DMA1	9
-#define IRQ_IXP4XX_PCI_DMA2	10
-#define IRQ_IXP4XX_TIMER2	11
-#define IRQ_IXP4XX_USB		12
-#define IRQ_IXP4XX_UART2	13
-#define IRQ_IXP4XX_TIMESTAMP	14
-#define IRQ_IXP4XX_UART1	15
-#define IRQ_IXP4XX_WDOG		16
-#define IRQ_IXP4XX_AHB_PMU	17
-#define IRQ_IXP4XX_XSCALE_PMU	18
-#define IRQ_IXP4XX_GPIO2	19
-#define IRQ_IXP4XX_GPIO3	20
-#define IRQ_IXP4XX_GPIO4	21
-#define IRQ_IXP4XX_GPIO5	22
-#define IRQ_IXP4XX_GPIO6	23
-#define IRQ_IXP4XX_GPIO7	24
-#define IRQ_IXP4XX_GPIO8	25
-#define IRQ_IXP4XX_GPIO9	26
-#define IRQ_IXP4XX_GPIO10	27
-#define IRQ_IXP4XX_GPIO11	28
-#define IRQ_IXP4XX_GPIO12	29
-#define IRQ_IXP4XX_SW_INT1	30
-#define IRQ_IXP4XX_SW_INT2	31
-#define IRQ_IXP4XX_USB_HOST	32
-#define IRQ_IXP4XX_I2C		33
-#define IRQ_IXP4XX_SSP		34
-#define IRQ_IXP4XX_TSYNC	35
-#define IRQ_IXP4XX_EAU_DONE	36
-#define IRQ_IXP4XX_SHA_DONE	37
-#define IRQ_IXP4XX_SWCP_PE	58
-#define IRQ_IXP4XX_QM_PE	60
-#define IRQ_IXP4XX_MCU_ECC	61
-#define IRQ_IXP4XX_EXP_PE	62
-
-#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS			64
-#else
-#define NR_IRQS			32
-#endif
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-#endif

arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h

@@ -43,8 +43,6 @@
  * Queue Manager
  */
 #define IXP4XX_QMGR_BASE_PHYS		0x60000000
-#define IXP4XX_QMGR_BASE_VIRT		IOMEM(0xFEF15000)
-#define IXP4XX_QMGR_REGION_SIZE		0x00004000
 
 /*
  * Peripheral space, including debug UART. Must be section-aligned so that
@@ -132,9 +130,6 @@
 #define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
 #define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
 #define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
-#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
-#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
 #define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
 #define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
 #define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
@@ -147,95 +142,6 @@
 #define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
 #define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
 
-/*
- * Constants to make it easy to access  Interrupt Controller registers
- */
-#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
-#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
-#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
-#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
-#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
-#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
-#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
-
-/*
- * IXP465-only
- */
-#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
-#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
-#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
-#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
-#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
-#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
-
-
-/*
- * Interrupt Controller Register Definitions.
- */
-
-#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
-
-#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
-#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
-#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
-#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
-#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
-#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
-#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
-#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
-#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
-#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
-#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
-#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
-#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
-#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
-                                                                                
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
-#define IXP4XX_GPIO_GPOER_OFFSET        0x04
-#define IXP4XX_GPIO_GPINR_OFFSET        0x08
-#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
-#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
-#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
-#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
-#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
-
-/* 
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
-
-#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
-#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
-#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
-#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
-#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
-#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
-#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
-#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
-
-/*
- * GPIO register bit definitions
- */
-
-/* Interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-/* 
- * Mask used to clear interrupt styles 
- */
-#define IXP4XX_GPIO_STYLE_CLEAR		0x7
-#define IXP4XX_GPIO_STYLE_SIZE		3
-
 /*
  * Constants to make it easy to access Timer Control/Status registers
  */

arch/arm/mach-ixp4xx/irqs.h

+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+#define IRQ_IXP4XX_BASE		16
+
+#define IRQ_IXP4XX_NPEA		(IRQ_IXP4XX_BASE + 0)
+#define IRQ_IXP4XX_NPEB		(IRQ_IXP4XX_BASE + 1)
+#define IRQ_IXP4XX_NPEC		(IRQ_IXP4XX_BASE + 2)
+#define IRQ_IXP4XX_QM1		(IRQ_IXP4XX_BASE + 3)
+#define IRQ_IXP4XX_QM2		(IRQ_IXP4XX_BASE + 4)
+#define IRQ_IXP4XX_TIMER1	(IRQ_IXP4XX_BASE + 5)
+#define IRQ_IXP4XX_GPIO0	(IRQ_IXP4XX_BASE + 6)
+#define IRQ_IXP4XX_GPIO1	(IRQ_IXP4XX_BASE + 7)
+#define IRQ_IXP4XX_PCI_INT	(IRQ_IXP4XX_BASE + 8)
+#define IRQ_IXP4XX_PCI_DMA1	(IRQ_IXP4XX_BASE + 9)
+#define IRQ_IXP4XX_PCI_DMA2	(IRQ_IXP4XX_BASE + 10)
+#define IRQ_IXP4XX_TIMER2	(IRQ_IXP4XX_BASE + 11)
+#define IRQ_IXP4XX_USB		(IRQ_IXP4XX_BASE + 12)
+#define IRQ_IXP4XX_UART2	(IRQ_IXP4XX_BASE + 13)
+#define IRQ_IXP4XX_TIMESTAMP	(IRQ_IXP4XX_BASE + 14)
+#define IRQ_IXP4XX_UART1	(IRQ_IXP4XX_BASE + 15)
+#define IRQ_IXP4XX_WDOG		(IRQ_IXP4XX_BASE + 16)
+#define IRQ_IXP4XX_AHB_PMU	(IRQ_IXP4XX_BASE + 17)
+#define IRQ_IXP4XX_XSCALE_PMU	(IRQ_IXP4XX_BASE + 18)
+#define IRQ_IXP4XX_GPIO2	(IRQ_IXP4XX_BASE + 19)
+#define IRQ_IXP4XX_GPIO3	(IRQ_IXP4XX_BASE + 20)
+#define IRQ_IXP4XX_GPIO4	(IRQ_IXP4XX_BASE + 21)
+#define IRQ_IXP4XX_GPIO5	(IRQ_IXP4XX_BASE + 22)
+#define IRQ_IXP4XX_GPIO6	(IRQ_IXP4XX_BASE + 23)
+#define IRQ_IXP4XX_GPIO7	(IRQ_IXP4XX_BASE + 24)
+#define IRQ_IXP4XX_GPIO8	(IRQ_IXP4XX_BASE + 25)
+#define IRQ_IXP4XX_GPIO9	(IRQ_IXP4XX_BASE + 26)
+#define IRQ_IXP4XX_GPIO10	(IRQ_IXP4XX_BASE + 27)
+#define IRQ_IXP4XX_GPIO11	(IRQ_IXP4XX_BASE + 28)
+#define IRQ_IXP4XX_GPIO12	(IRQ_IXP4XX_BASE + 29)
+#define IRQ_IXP4XX_SW_INT1	(IRQ_IXP4XX_BASE + 30)
+#define IRQ_IXP4XX_SW_INT2	(IRQ_IXP4XX_BASE + 31)
+#define IRQ_IXP4XX_USB_HOST	(IRQ_IXP4XX_BASE + 32)
+#define IRQ_IXP4XX_I2C		(IRQ_IXP4XX_BASE + 33)
+#define IRQ_IXP4XX_SSP		(IRQ_IXP4XX_BASE + 34)
+#define IRQ_IXP4XX_TSYNC	(IRQ_IXP4XX_BASE + 35)
+#define IRQ_IXP4XX_EAU_DONE	(IRQ_IXP4XX_BASE + 36)
+#define IRQ_IXP4XX_SHA_DONE	(IRQ_IXP4XX_BASE + 37)
+#define IRQ_IXP4XX_SWCP_PE	(IRQ_IXP4XX_BASE + 58)
+#define IRQ_IXP4XX_QM_PE	(IRQ_IXP4XX_BASE + 60)
+#define IRQ_IXP4XX_MCU_ECC	(IRQ_IXP4XX_BASE + 61)
+#define IRQ_IXP4XX_EXP_PE	(IRQ_IXP4XX_BASE + 62)
+
+#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
+#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+#endif

arch/arm/mach-ixp4xx/ixdp425-pci.c

@@ -24,6 +24,8 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		4
 #define IRQ_LINES	4
 

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -32,6 +32,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define IXDP425_SDA_PIN		7
 #define IXDP425_SCL_PIN		6
 

arch/arm/mach-ixp4xx/ixdpg425-pci.c

@@ -23,6 +23,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init ixdpg425_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);

arch/arm/mach-ixp4xx/ixp4xx-of.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IXP4xx Device Tree boot support
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/ixp4xx-regs.h>
+
+static struct map_desc ixp4xx_of_io_desc[] __initdata = {
+	/*
+	 * This is needed for runtime system configuration checks,
+	 * such as reading if hardware so-and-so is present. This
+	 * could eventually be converted into a syscon once all boards
+	 * are converted to device tree.
+	 */
+	{
+		.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
+		.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
+		.length = SZ_4K,
+		.type = MT_DEVICE,
+	},
+#ifdef CONFIG_DEBUG_UART_8250
+	/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+	{
+		.virtual = CONFIG_DEBUG_UART_VIRT,
+		.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
+		.length = SZ_4K,
+		.type = MT_DEVICE,
+	},
+#endif
+};
+
+static void __init ixp4xx_of_map_io(void)
+{
+	iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
+}
+
+/*
+ * We handle 4 differen SoC families. These compatible strings are enough
+ * to provide the core so that different boards can add their more detailed
+ * specifics.
+ */
+static const char *ixp4xx_of_board_compat[] = {
+	"intel,ixp42x",
+	"intel,ixp43x",
+	"intel,ixp45x",
+	"intel,ixp46x",
+	NULL,
+};
+
+DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
+	.map_io		= ixp4xx_of_map_io,
+	.dt_compat	= ixp4xx_of_board_compat,
+MACHINE_END

arch/arm/mach-ixp4xx/nas100d-pci.c

@@ -21,6 +21,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 

arch/arm/mach-ixp4xx/nas100d-setup.c

@@ -34,6 +34,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define NAS100D_SDA_PIN		5
 #define NAS100D_SCL_PIN		6
 
@@ -279,9 +281,6 @@ static void __init nas100d_init(void)
 
 	ixp4xx_sys_init();
 
-	/* gpio 14 and 15 are _not_ clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
 	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	nas100d_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

arch/arm/mach-ixp4xx/nslu2-pci.c

@@ -21,6 +21,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -32,6 +32,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
+#include "irqs.h"
+
 #define NSLU2_SDA_PIN		7
 #define NSLU2_SCL_PIN		6
 
@@ -125,10 +127,18 @@ static struct platform_device nslu2_i2c_gpio = {
 	},
 };
 
+static struct resource nslu2_beeper_resources[] = {
+	{
+		.start	= IRQ_IXP4XX_TIMER2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device nslu2_beeper = {
 	.name			= "ixp4xx-beeper",
 	.id			= NSLU2_GPIO_BUZZ,
-	.num_resources		= 0,
+	.resource		= nslu2_beeper_resources,
+	.num_resources		= ARRAY_SIZE(nslu2_beeper_resources),
 };
 
 static struct resource nslu2_uart_resources[] = {

arch/arm/mach-ixp4xx/wg302v2-pci.c

@@ -27,6 +27,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init wg302v2_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);

arch/arm/mach-ixp4xx/wg302v2-setup.c

@@ -29,6 +29,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 static struct flash_platform_data wg302v2_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,

arch/arm/mach-lpc32xx/phy3250.c

+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Platform support for LPC32xx SoC
  *
@@ -5,44 +6,14 @@
  *
  * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
  * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
 #include <linux/amba/pl08x.h>
-#include <linux/amba/mmci.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/clk.h>
-#include <linux/mtd/lpc32xx_slc.h>
 #include <linux/mtd/lpc32xx_mlc.h>
+#include <linux/mtd/lpc32xx_slc.h>
+#include <linux/of_platform.h>
 
-#include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/board.h>
 #include "common.h"
 
 static struct pl08x_channel_data pl08x_slave_channels[] = {
@@ -90,8 +61,6 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
 };
 
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
-	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
 	OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
 		       &lpc32xx_slc_data),
@@ -104,11 +73,6 @@ static void __init lpc3250_machine_init(void)
 {
 	lpc32xx_serial_init();
 
-	/* Test clock needed for UDA1380 initial init */
-	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
-		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
-		LPC32XX_CLKPWR_TEST_CLK_SEL);
-
 	of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL);
 }
 

arch/arm/mach-omap2/common.h

@@ -336,6 +336,15 @@ static inline void omap5_secondary_hyp_startup(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+extern int dra7xx_pciess_reset(struct omap_hwmod *oh);
+#else
+static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
+{
+	return 0;
+}
+#endif
+
 void pdata_quirks_init(const struct of_device_id *);
 void omap_auxdata_legacy_init(struct device *dev);
 void omap_pcs_legacy_init(int irq, void (*rearm)(void));

arch/arm/mach-omap2/i2c.c

@@ -53,15 +53,10 @@ int omap_i2c_reset(struct omap_hwmod *oh)
 	u16 i2c_con;
 	int c = 0;
 
-	if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
-		i2c_con = OMAP4_I2C_CON_OFFSET;
-	} else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
+	if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx())
 		i2c_con = OMAP2_I2C_CON_OFFSET;
-	} else {
-		WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
-		     oh->name);
-		return -EINVAL;
-	}
+	else
+		i2c_con = OMAP4_I2C_CON_OFFSET;
 
 	/* Disable I2C */
 	v = omap_hwmod_read(oh, i2c_con);

arch/arm/mach-omap2/io.c

@@ -411,14 +411,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 
 static void __init __maybe_unused omap_hwmod_init_postsetup(void)
 {
-	u8 postsetup_state;
+	u8 postsetup_state = _HWMOD_STATE_DEFAULT;
 
 	/* Set the default postsetup state for all hwmods */
-#ifdef CONFIG_PM
-	postsetup_state = _HWMOD_STATE_IDLE;
-#else
-	postsetup_state = _HWMOD_STATE_ENABLED;
-#endif
 	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
 }