Commit 22dfab7f authored by Daniel Kurtz's avatar Daniel Kurtz Committed by Linus Torvalds

Input: atmel_mxt_ts - Support for touchpad variant

This same driver can be used by atmel based touchscreens and touchpads
(buttonpads). Platform data may specify a device is a touchpad
using the is_tp flag.

This will cause the driver to perform some touchpad specific
initializations, such as:
  * register input device name "Atmel maXTouch Touchpad" instead of
  Touchscreen.
  * register BTN_LEFT & BTN_TOOL_* event types.
  * register axis resolution (as a fixed constant, for now)
  * register BUTTONPAD property
  * process GPIO buttons using reportid T19

Input event GPIO mapping is done by the platform data key_map array.

key_map[x] should contain the KEY or BTN code to send when processing
GPIOx from T19. To specify a GPIO as not an input source, populate
with KEY_RESERVED, or 0.
Signed-off-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: default avatarBenson Leung <bleung@chromium.org>
Signed-off-by: default avatarNick Dyer <nick.dyer@itdev.co.uk>
Tested-by: default avatarOlof Johansson <olof@lixom.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 67a865a4
......@@ -181,6 +181,12 @@
#define MXT_FWRESET_TIME 175 /* msec */
/* MXT_SPT_GPIOPWM_T19 field */
#define MXT_GPIO0_MASK 0x04
#define MXT_GPIO1_MASK 0x08
#define MXT_GPIO2_MASK 0x10
#define MXT_GPIO3_MASK 0x20
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
#define MXT_UNLOCK_CMD_LSB 0xdc
......@@ -212,6 +218,8 @@
/* Touchscreen absolute values */
#define MXT_MAX_AREA 0xff
#define MXT_PIXELS_PER_MM 20
struct mxt_info {
u8 family_id;
u8 variant_id;
......@@ -243,6 +251,8 @@ struct mxt_data {
const struct mxt_platform_data *pdata;
struct mxt_object *object_table;
struct mxt_info info;
bool is_tp;
unsigned int irq;
unsigned int max_x;
unsigned int max_y;
......@@ -251,6 +261,7 @@ struct mxt_data {
u8 T6_reportid;
u8 T9_reportid_min;
u8 T9_reportid_max;
u8 T19_reportid;
};
static bool mxt_object_readable(unsigned int type)
......@@ -502,6 +513,21 @@ static int mxt_write_object(struct mxt_data *data,
return mxt_write_reg(data->client, reg + offset, val);
}
static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
{
struct input_dev *input = data->input_dev;
bool button;
int i;
/* Active-low switch */
for (i = 0; i < MXT_NUM_GPIO; i++) {
if (data->pdata->key_map[i] == KEY_RESERVED)
continue;
button = !(message->message[0] & MXT_GPIO0_MASK << i);
input_report_key(input, data->pdata->key_map[i], button);
}
}
static void mxt_input_touchevent(struct mxt_data *data,
struct mxt_message *message, int id)
{
......@@ -585,6 +611,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
int id = reportid - data->T9_reportid_min;
mxt_input_touchevent(data, &message, id);
update_input = true;
} else if (message.reportid == data->T19_reportid) {
mxt_input_button(data, &message);
update_input = true;
} else {
mxt_dump_message(dev, &message);
}
......@@ -764,6 +793,9 @@ static int mxt_get_object_table(struct mxt_data *data)
data->T9_reportid_min = min_id;
data->T9_reportid_max = max_id;
break;
case MXT_SPT_GPIOPWM_T19:
data->T19_reportid = min_id;
break;
}
}
......@@ -777,7 +809,7 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T6_reportid = 0;
data->T9_reportid_min = 0;
data->T9_reportid_max = 0;
data->T19_reportid = 0;
}
static int mxt_initialize(struct mxt_data *data)
......@@ -1115,9 +1147,13 @@ static int mxt_probe(struct i2c_client *client,
goto err_free_mem;
}
input_dev->name = "Atmel maXTouch Touchscreen";
data->is_tp = pdata && pdata->is_tp;
input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
"Atmel maXTouch Touchscreen";
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
client->adapter->nr, client->addr);
input_dev->phys = data->phys;
input_dev->id.bustype = BUS_I2C;
......@@ -1140,6 +1176,29 @@ static int mxt_probe(struct i2c_client *client,
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
if (data->is_tp) {
int i;
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
for (i = 0; i < MXT_NUM_GPIO; i++)
if (pdata->key_map[i] != KEY_RESERVED)
__set_bit(pdata->key_map[i], input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
__set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
MXT_PIXELS_PER_MM);
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
MXT_PIXELS_PER_MM);
}
/* For single touch */
input_set_abs_params(input_dev, ABS_X,
0, data->max_x, 0, 0);
......@@ -1258,6 +1317,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
static const struct i2c_device_id mxt_id[] = {
{ "qt602240_ts", 0 },
{ "atmel_mxt_ts", 0 },
{ "atmel_mxt_tp", 0 },
{ "mXT224", 0 },
{ }
};
......
......@@ -15,6 +15,9 @@
#include <linux/types.h>
/* For key_map array */
#define MXT_NUM_GPIO 4
/* Orient */
#define MXT_NORMAL 0x0
#define MXT_DIAGONAL 0x1
......@@ -39,6 +42,8 @@ struct mxt_platform_data {
unsigned int voltage;
unsigned char orient;
unsigned long irqflags;
bool is_tp;
const unsigned int key_map[MXT_NUM_GPIO];
};
#endif /* __LINUX_ATMEL_MXT_TS_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment