Commit 22e4dda0 authored by Allan, Bruce W's avatar Allan, Bruce W Committed by Herbert Xu

crypto: qat - fix device reset flow

When the device needs a reset, e.g. when an uncorrectable PCIe AER event
occurs, various services/data structures need to be cleaned up, the
hardware reset and the services/data structures initialized and started.
The code to perform the cleanup and initialization was not performed when
a device reset was done.

This patch moves some of the initialization code out of the .probe entry-
point into a separate function that is now called during probe as well as
after the hardware has been reset.  Similarly, a new function is added for
first cleaning up these services/data structures prior to resetting.  The
new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for
which there are already prototypes but no actual functions just yet and are
now called when the device is reset and during probe/cleanup of the driver.
The down and up flows via ioctl calls has similarly been updated.

In addition, there are two other bugs in the reset flow - one in the logic
for determining whether to schedule a device reset upon receiving an
uncorrectable AER event which prevents the reset flow from being initiated,
and another with clearing the status bit indicating a device is configured
(when resetting the device the configuration remains across the reset so
the bit should not be cleared, otherwise, the necessary services will not
be re-started in adf_dev_start() after the reset - clear the bit only when
actually deleting the configuration).
Signed-off-by: default avatarBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 8a45ac12
......@@ -148,6 +148,11 @@ struct adf_hw_device_data {
int (*alloc_irq)(struct adf_accel_dev *accel_dev);
void (*free_irq)(struct adf_accel_dev *accel_dev);
void (*enable_error_correction)(struct adf_accel_dev *accel_dev);
int (*init_admin_comms)(struct adf_accel_dev *accel_dev);
void (*exit_admin_comms)(struct adf_accel_dev *accel_dev);
int (*init_arb)(struct adf_accel_dev *accel_dev);
void (*exit_arb)(struct adf_accel_dev *accel_dev);
void (*enable_ints)(struct adf_accel_dev *accel_dev);
const char *fw_name;
uint32_t pci_dev_id;
uint32_t fuses;
......
......@@ -125,8 +125,9 @@ static void adf_device_reset_worker(struct work_struct *work)
adf_dev_restarting_notify(accel_dev);
adf_dev_stop(accel_dev);
adf_dev_shutdown(accel_dev);
adf_dev_restore(accel_dev);
if (adf_dev_start(accel_dev)) {
if (adf_dev_init(accel_dev) || adf_dev_start(accel_dev)) {
/* The device hanged and we can't restart it so stop here */
dev_err(&GET_DEV(accel_dev), "Restart device failed\n");
kfree(reset_data);
......@@ -148,8 +149,8 @@ static int adf_dev_aer_schedule_reset(struct adf_accel_dev *accel_dev,
{
struct adf_reset_dev_data *reset_data;
if (adf_dev_started(accel_dev) &&
!test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
if (!adf_dev_started(accel_dev) ||
test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
return 0;
set_bit(ADF_STATUS_RESTARTING, &accel_dev->status);
......
......@@ -50,6 +50,7 @@
#include <linux/seq_file.h>
#include "adf_accel_devices.h"
#include "adf_cfg.h"
#include "adf_common_drv.h"
static DEFINE_MUTEX(qat_cfg_read_lock);
......@@ -159,6 +160,7 @@ void adf_cfg_del_all(struct adf_accel_dev *accel_dev)
down_write(&dev_cfg_data->lock);
adf_cfg_section_del_all(&dev_cfg_data->sec_list);
up_write(&dev_cfg_data->lock);
clear_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
}
/**
......
......@@ -93,7 +93,7 @@ int adf_service_unregister(struct service_hndl *service);
int adf_dev_init(struct adf_accel_dev *accel_dev);
int adf_dev_start(struct adf_accel_dev *accel_dev);
int adf_dev_stop(struct adf_accel_dev *accel_dev);
int adf_dev_shutdown(struct adf_accel_dev *accel_dev);
void adf_dev_shutdown(struct adf_accel_dev *accel_dev);
int adf_ctl_dev_register(void);
void adf_ctl_dev_unregister(void);
......
......@@ -282,6 +282,8 @@ static int adf_ctl_stop_devices(uint32_t id)
if (adf_dev_stop(accel_dev)) {
pr_err("QAT: Failed to stop qat_dev%d\n", id);
ret = -EFAULT;
} else {
adf_dev_shutdown(accel_dev);
}
}
}
......@@ -343,7 +345,9 @@ static int adf_ctl_ioctl_dev_start(struct file *fp, unsigned int cmd,
if (!adf_dev_started(accel_dev)) {
pr_info("QAT: Starting acceleration device qat_dev%d.\n",
ctl_data->device_id);
ret = adf_dev_start(accel_dev);
ret = adf_dev_init(accel_dev);
if (!ret)
ret = adf_dev_start(accel_dev);
} else {
pr_info("QAT: Acceleration device qat_dev%d already started.\n",
ctl_data->device_id);
......@@ -351,6 +355,7 @@ static int adf_ctl_ioctl_dev_start(struct file *fp, unsigned int cmd,
if (ret) {
pr_err("QAT: Failed to start qat_dev%d\n", ctl_data->device_id);
adf_dev_stop(accel_dev);
adf_dev_shutdown(accel_dev);
}
out:
kfree(ctl_data);
......
......@@ -108,26 +108,47 @@ int adf_service_unregister(struct service_hndl *service)
EXPORT_SYMBOL_GPL(adf_service_unregister);
/**
* adf_dev_start() - Start acceleration service for the given accel device
* @accel_dev: Pointer to acceleration device.
* adf_dev_init() - Init data structures and services for the given accel device
* @accel_dev: Pointer to acceleration device.
*
* Function notifies all the registered services that the acceleration device
* is ready to be used.
* To be used by QAT device specific drivers.
* Initialize the ring data structures and the admin comms and arbitration
* services.
*
* Return: 0 on success, error code othewise.
*/
int adf_dev_start(struct adf_accel_dev *accel_dev)
int adf_dev_init(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
if (!hw_data) {
dev_err(&GET_DEV(accel_dev),
"QAT: Failed to init device - hw_data not set\n");
return -EFAULT;
}
if (!test_bit(ADF_STATUS_CONFIGURED, &accel_dev->status)) {
pr_info("QAT: Device not configured\n");
return -EFAULT;
}
set_bit(ADF_STATUS_STARTING, &accel_dev->status);
if (adf_init_etr_data(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed initialize etr\n");
return -EFAULT;
}
if (hw_data->init_admin_comms && hw_data->init_admin_comms(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n");
return -EFAULT;
}
if (hw_data->init_arb && hw_data->init_arb(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed initialize hw arbiter\n");
return -EFAULT;
}
hw_data->enable_ints(accel_dev);
if (adf_ae_init(accel_dev)) {
pr_err("QAT: Failed to initialise Acceleration Engine\n");
......@@ -178,6 +199,27 @@ int adf_dev_start(struct adf_accel_dev *accel_dev)
hw_data->enable_error_correction(accel_dev);
return 0;
}
EXPORT_SYMBOL_GPL(adf_dev_init);
/**
* adf_dev_start() - Start acceleration service for the given accel device
* @accel_dev: Pointer to acceleration device.
*
* Function notifies all the registered services that the acceleration device
* is ready to be used.
* To be used by QAT device specific drivers.
*
* Return: 0 on success, error code othewise.
*/
int adf_dev_start(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
set_bit(ADF_STATUS_STARTING, &accel_dev->status);
if (adf_ae_start(accel_dev)) {
pr_err("QAT: AE Start Failed\n");
return -EFAULT;
......@@ -232,7 +274,6 @@ EXPORT_SYMBOL_GPL(adf_dev_start);
*/
int adf_dev_stop(struct adf_accel_dev *accel_dev)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
struct service_hndl *service;
struct list_head *list_itr;
int ret, wait = 0;
......@@ -241,7 +282,6 @@ int adf_dev_stop(struct adf_accel_dev *accel_dev)
!test_bit(ADF_STATUS_STARTING, &accel_dev->status)) {
return 0;
}
clear_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
clear_bit(ADF_STATUS_STARTING, &accel_dev->status);
clear_bit(ADF_STATUS_STARTED, &accel_dev->status);
......@@ -285,6 +325,29 @@ int adf_dev_stop(struct adf_accel_dev *accel_dev)
clear_bit(ADF_STATUS_AE_STARTED, &accel_dev->status);
}
return 0;
}
EXPORT_SYMBOL_GPL(adf_dev_stop);
/**
* adf_dev_shutdown() - shutdown acceleration services and data strucutures
* @accel_dev: Pointer to acceleration device
*
* Cleanup the ring data structures and the admin comms and arbitration
* services.
*/
void adf_dev_shutdown(struct adf_accel_dev *accel_dev)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
struct service_hndl *service;
struct list_head *list_itr;
if (!hw_data) {
dev_err(&GET_DEV(accel_dev),
"QAT: Failed to shutdown device - hw_data not set\n");
return;
}
if (test_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status)) {
if (adf_ae_fw_release(accel_dev))
pr_err("QAT: Failed to release the ucode\n");
......@@ -335,9 +398,15 @@ int adf_dev_stop(struct adf_accel_dev *accel_dev)
if (!test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
adf_cfg_del_all(accel_dev);
return 0;
if (hw_data->exit_arb)
hw_data->exit_arb(accel_dev);
if (hw_data->exit_admin_comms)
hw_data->exit_admin_comms(accel_dev);
adf_cleanup_etr_data(accel_dev);
}
EXPORT_SYMBOL_GPL(adf_dev_stop);
EXPORT_SYMBOL_GPL(adf_dev_shutdown);
int adf_dev_restarting_notify(struct adf_accel_dev *accel_dev)
{
......
......@@ -46,6 +46,7 @@
*/
#include <adf_accel_devices.h>
#include "adf_dh895xcc_hw_data.h"
#include "adf_common_drv.h"
#include "adf_drv.h"
/* Worker thread to service arbiter mappings based on dev SKUs */
......@@ -182,6 +183,19 @@ static void adf_enable_error_correction(struct adf_accel_dev *accel_dev)
}
}
static void adf_enable_ints(struct adf_accel_dev *accel_dev)
{
void __iomem *addr;
addr = (&GET_BARS(accel_dev)[ADF_DH895XCC_PMISC_BAR])->virt_addr;
/* Enable bundle and misc interrupts */
ADF_CSR_WR(addr, ADF_DH895XCC_SMIAPF0_MASK_OFFSET,
ADF_DH895XCC_SMIA0_MASK);
ADF_CSR_WR(addr, ADF_DH895XCC_SMIAPF1_MASK_OFFSET,
ADF_DH895XCC_SMIA1_MASK);
}
void adf_init_hw_data_dh895xcc(struct adf_hw_device_data *hw_data)
{
hw_data->dev_class = &dh895xcc_class;
......@@ -206,6 +220,11 @@ void adf_init_hw_data_dh895xcc(struct adf_hw_device_data *hw_data)
hw_data->get_misc_bar_id = get_misc_bar_id;
hw_data->get_sku = get_sku;
hw_data->fw_name = ADF_DH895XCC_FW;
hw_data->init_admin_comms = adf_init_admin_comms;
hw_data->exit_admin_comms = adf_exit_admin_comms;
hw_data->init_arb = adf_init_arb;
hw_data->exit_arb = adf_exit_arb;
hw_data->enable_ints = adf_enable_ints;
}
void adf_clean_hw_data_dh895xcc(struct adf_hw_device_data *hw_data)
......
......@@ -90,9 +90,7 @@ static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev;
int i;
adf_exit_admin_comms(accel_dev);
adf_exit_arb(accel_dev);
adf_cleanup_etr_data(accel_dev);
adf_dev_shutdown(accel_dev);
for (i = 0; i < ADF_PCI_MAX_BARS; i++) {
struct adf_bar *bar = &accel_pci_dev->pci_bars[i];
......@@ -119,7 +117,7 @@ static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
kfree(accel_dev);
}
static int qat_dev_start(struct adf_accel_dev *accel_dev)
static int adf_dev_configure(struct adf_accel_dev *accel_dev)
{
int cpus = num_online_cpus();
int banks = GET_MAX_BANKS(accel_dev);
......@@ -206,7 +204,7 @@ static int qat_dev_start(struct adf_accel_dev *accel_dev)
goto err;
set_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
return adf_dev_start(accel_dev);
return 0;
err:
dev_err(&GET_DEV(accel_dev), "Failed to start QAT accel dev\n");
return -EINVAL;
......@@ -217,7 +215,6 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct adf_accel_dev *accel_dev;
struct adf_accel_pci *accel_pci_dev;
struct adf_hw_device_data *hw_data;
void __iomem *pmisc_bar_addr = NULL;
char name[ADF_DEVICE_NAME_LENGTH];
unsigned int i, bar_nr;
int ret;
......@@ -347,8 +344,6 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ret = -EFAULT;
goto out_err;
}
if (i == ADF_DH895XCC_PMISC_BAR)
pmisc_bar_addr = bar->virt_addr;
}
pci_set_master(pdev);
......@@ -358,36 +353,21 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_err;
}
if (adf_init_etr_data(accel_dev)) {
dev_err(&pdev->dev, "Failed initialize etr\n");
ret = -EFAULT;
goto out_err;
}
if (adf_init_admin_comms(accel_dev)) {
dev_err(&pdev->dev, "Failed initialize admin comms\n");
ret = -EFAULT;
goto out_err;
}
if (adf_init_arb(accel_dev)) {
dev_err(&pdev->dev, "Failed initialize hw arbiter\n");
ret = -EFAULT;
goto out_err;
}
if (pci_save_state(pdev)) {
dev_err(&pdev->dev, "Failed to save pci state\n");
ret = -ENOMEM;
goto out_err;
}
/* Enable bundle and misc interrupts */
ADF_CSR_WR(pmisc_bar_addr, ADF_DH895XCC_SMIAPF0_MASK_OFFSET,
ADF_DH895XCC_SMIA0_MASK);
ADF_CSR_WR(pmisc_bar_addr, ADF_DH895XCC_SMIAPF1_MASK_OFFSET,
ADF_DH895XCC_SMIA1_MASK);
ret = adf_dev_configure(accel_dev);
if (ret)
goto out_err;
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err;
ret = qat_dev_start(accel_dev);
ret = adf_dev_start(accel_dev);
if (ret) {
adf_dev_stop(accel_dev);
goto out_err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment