Skip to content

L
linux
Commit 231f67d1 authored by Sibi Sankar's avatar Sibi Sankar Committed by Bjorn Andersson
Browse files
Options

remoteproc: q6v5: Add support for mss remoteproc on SDM845 

From SDM845, the Q6SS reset sequence on software side has been
simplified with the introduction of boot FSM which assists in
bringing the Q6 out of reset.

SDM845 brings a new reset signal ALT_RESET which is a part of
the MSS subsystem hence requires reset clks to be enabled before
assert/deassert. Use the SoC specific reset helper function to
add support for ALT_RESET in SDM845.
Signed-off-by: default avatarSibi Sankar <sibis@codeaurora.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 9f135fa1
Hide whitespace changes
Inline Side-by-side
Showing with 111 additions and 4 deletions
drivers/remoteproc/qcom_q6v5_pil.c
View file @ 231f67d1
......@@ -57,6 +57,8 @@
#define RMB_PMI_META_DATA_REG 0x10
#define RMB_PMI_CODE_START_REG 0x14
#define RMB_PMI_CODE_LENGTH_REG 0x18
#define RMB_MBA_MSS_STATUS 0x40
#define RMB_MBA_ALT_RESET 0x44
#define RMB_CMD_META_DATA_READY 0x1
#define RMB_CMD_LOAD_READY 0x2
......@@ -104,6 +106,13 @@
#define QDSP6SS_XO_CBCR 0x0038
#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
/* QDSP6v65 parameters */
#define QDSP6SS_SLEEP 0x3C
#define QDSP6SS_BOOT_CORE_START 0x400
#define QDSP6SS_BOOT_CMD 0x404
#define SLEEP_CHECK_MAX_LOOPS 200
#define BOOT_FSM_TIMEOUT 10000
struct reg_info {
struct regulator *reg;
int uV;
......@@ -121,9 +130,11 @@ struct rproc_hexagon_res {
struct qcom_mss_reg_res *proxy_supply;
struct qcom_mss_reg_res *active_supply;
char **proxy_clk_names;
char **reset_clk_names;
char **active_clk_names;
int version;
bool need_mem_protection;
bool has_alt_reset;
};
struct q6v5 {
......@@ -148,8 +159,10 @@ struct q6v5 {
bool proxy_unvoted;
struct clk *active_clks[8];
struct clk *reset_clks[4];
struct clk *proxy_clks[4];
int active_clk_count;
int reset_clk_count;
int proxy_clk_count;
struct reg_info active_regs[1];
......@@ -174,6 +187,7 @@ struct q6v5 {
struct qcom_rproc_ssr ssr_subdev;
struct qcom_sysmon *sysmon;
bool need_mem_protection;
bool has_alt_reset;
int mpss_perm;
int mba_perm;
int version;
......@@ -183,6 +197,7 @@ enum {
MSS_MSM8916,
MSS_MSM8974,
MSS_MSM8996,
MSS_SDM845,
};
static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
......@@ -339,12 +354,25 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
static int q6v5_reset_assert(struct q6v5 *qproc)
{
return reset_control_assert(qproc->mss_restart);
if (qproc->has_alt_reset)
return reset_control_reset(qproc->mss_restart);
else
return reset_control_assert(qproc->mss_restart);
}
static int q6v5_reset_deassert(struct q6v5 *qproc)
{
return reset_control_deassert(qproc->mss_restart);
int ret;
if (qproc->has_alt_reset) {
writel(1, qproc->rmb_base + RMB_MBA_ALT_RESET);
ret = reset_control_reset(qproc->mss_restart);
writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET);
} else {
ret = reset_control_deassert(qproc->mss_restart);
}
return ret;
}
static int q6v5_rmb_pbl_wait(struct q6v5 *qproc, int ms)
......@@ -399,8 +427,35 @@ static int q6v5proc_reset(struct q6v5 *qproc)
int ret;
int i;
if (qproc->version == MSS_SDM845) {
val = readl(qproc->reg_base + QDSP6SS_SLEEP);
val |= 0x1;
writel(val, qproc->reg_base + QDSP6SS_SLEEP);
if (qproc->version == MSS_MSM8996) {
ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP,
val, !(val & BIT(31)), 1,
SLEEP_CHECK_MAX_LOOPS);
if (ret) {
dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n");
return -ETIMEDOUT;
}
/* De-assert QDSP6 stop core */
writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START);
/* Trigger boot FSM */
writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD);
ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS,
val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT);
if (ret) {
dev_err(qproc->dev, "Boot FSM failed to complete.\n");
/* Reset the modem so that boot FSM is in reset state */
q6v5_reset_deassert(qproc);
return ret;
}
goto pbl_wait;
} else if (qproc->version == MSS_MSM8996) {
/* Override the ACC value if required */
writel(QDSP6SS_ACC_OVERRIDE_VAL,
qproc->reg_base + QDSP6SS_STRAP_ACC);
......@@ -508,6 +563,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
val &= ~Q6SS_STOP_CORE;
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
pbl_wait:
/* Wait for PBL status */
ret = q6v5_rmb_pbl_wait(qproc, 1000);
if (ret == -ETIMEDOUT) {
......@@ -765,10 +821,18 @@ static int q6v5_start(struct rproc *rproc)
dev_err(qproc->dev, "failed to enable supplies\n");
goto disable_proxy_clk;
}
ret = q6v5_clk_enable(qproc->dev, qproc->reset_clks,
qproc->reset_clk_count);
if (ret) {
dev_err(qproc->dev, "failed to enable reset clocks\n");
goto disable_vdd;
}
ret = q6v5_reset_deassert(qproc);
if (ret) {
dev_err(qproc->dev, "failed to deassert mss restart\n");
goto disable_vdd;
goto disable_reset_clks;
}
ret = q6v5_clk_enable(qproc->dev, qproc->active_clks,
......@@ -854,6 +918,9 @@ static int q6v5_start(struct rproc *rproc)
assert_reset:
q6v5_reset_assert(qproc);
disable_reset_clks:
q6v5_clk_disable(qproc->dev, qproc->reset_clks,
qproc->reset_clk_count);
disable_vdd:
q6v5_regulator_disable(qproc, qproc->active_regs,
qproc->active_reg_count);
......@@ -917,6 +984,8 @@ static int q6v5_stop(struct rproc *rproc)
qproc->proxy_reg_count);
}
q6v5_clk_disable(qproc->dev, qproc->reset_clks,
qproc->reset_clk_count);
q6v5_clk_disable(qproc->dev, qproc->active_clks,
qproc->active_clk_count);
q6v5_regulator_disable(qproc, qproc->active_regs,
......@@ -1196,6 +1265,14 @@ static int q6v5_probe(struct platform_device *pdev)
}
qproc->proxy_clk_count = ret;
ret = q6v5_init_clocks(&pdev->dev, qproc->reset_clks,
desc->reset_clk_names);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to get reset clocks.\n");
goto free_rproc;
}
qproc->reset_clk_count = ret;
ret = q6v5_init_clocks(&pdev->dev, qproc->active_clks,
desc->active_clk_names);
if (ret < 0) {
......@@ -1225,6 +1302,7 @@ static int q6v5_probe(struct platform_device *pdev)
goto free_rproc;
qproc->version = desc->version;
qproc->has_alt_reset = desc->has_alt_reset;
qproc->need_mem_protection = desc->need_mem_protection;
ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
if (ret < 0)
......@@ -1285,6 +1363,31 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
static const struct rproc_hexagon_res sdm845_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_clk_names = (char*[]){
"xo",
"axis2",
"prng",
NULL
},
.reset_clk_names = (char*[]){
"iface",
"snoc_axi",
NULL
},
.active_clk_names = (char*[]){
"bus",
"mem",
"gpll0_mss",
"mnoc_axi",
NULL
},
.need_mem_protection = true,
.has_alt_reset = true,
.version = MSS_SDM845,
};
static const struct rproc_hexagon_res msm8996_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_clk_names = (char*[]){
......@@ -1300,6 +1403,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
NULL
},
.need_mem_protection = true,
.has_alt_reset = false,
.version = MSS_MSM8996,
};
......@@ -1331,6 +1435,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
NULL
},
.need_mem_protection = false,
.has_alt_reset = false,
.version = MSS_MSM8916,
};
......@@ -1370,6 +1475,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
NULL
},
.need_mem_protection = false,
.has_alt_reset = false,
.version = MSS_MSM8974,
};
......@@ -1378,6 +1484,7 @@ static const struct of_device_id q6v5_of_match[] = {
{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
{ },
};
MODULE_DEVICE_TABLE(of, q6v5_of_match);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7