drm/i915: Apply CMTG clock disabling WA while DPLL0 is enabled

CI test results/further experiments show that the workaround added in

commit 573d7ce4 ("drm/i915/adlp: Add workaround to disable CMTG clock gating")

can be applied only while DPLL0 is enabled. If it's disabled the
TRANS_CMTG_CHICKEN register is not accessible. Accordingly move the WA
to DPLL0 HW state sanitization and enabling.

This fixes an issue where the WA won't get applied (and a WARN is thrown
due to an unexpected value in TRANS_CMTG_CHICKEN) if the driver is
loaded without DPLL0 being enabled: booting without BIOS enabling an
output with this PLL, or reloading the driver.

While at it also add a debug print for the unexpected register value.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802190148.2099625-1-imre.deak@intel.com

drivers/gpu/drm/i915/display/intel_display.c

@@ -13281,24 +13281,6 @@ static void intel_early_display_was(struct drm_i915_private *dev_priv)
 			     KBL_ARB_FILL_SPARE_13 | KBL_ARB_FILL_SPARE_14,
 			     KBL_ARB_FILL_SPARE_14);
 	}
-
-	if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) {
-		u32 val;
-
-		/*
-		 * Wa_16011069516:adl-p[a0]
-		 *
-		 * All CMTG regs are unreliable until CMTG clock gating is
-		 * disabled, so we can only assume the default CMTG_CHICKEN
-		 * reg value and sanity check this assumption with a double
-		 * read, which presumably returns the correct value even with
-		 * clock gating on.
-		 */
-		val = intel_de_read(dev_priv, TRANS_CMTG_CHICKEN);
-		val = intel_de_read(dev_priv, TRANS_CMTG_CHICKEN);
-		intel_de_write(dev_priv, TRANS_CMTG_CHICKEN, DISABLE_DPT_CLK_GATING);
-		drm_WARN_ON(&dev_priv->drm, val & ~DISABLE_DPT_CLK_GATING);
-	}
 }
 
 static void ibx_sanitize_pch_hdmi_port(struct drm_i915_private *dev_priv,

drivers/gpu/drm/i915/display/intel_dpll_mgr.c

@@ -3735,6 +3735,31 @@ static void icl_pll_enable(struct drm_i915_private *dev_priv,
 		drm_err(&dev_priv->drm, "PLL %d not locked\n", pll->info->id);
 }
 
+static void adlp_cmtg_clock_gating_wa(struct drm_i915_private *i915, struct intel_shared_dpll *pll)
+{
+	u32 val;
+
+	if (!IS_ADLP_DISPLAY_STEP(i915, STEP_A0, STEP_B0) ||
+	    pll->info->id != DPLL_ID_ICL_DPLL0)
+		return;
+	/*
+	 * Wa_16011069516:adl-p[a0]
+	 *
+	 * All CMTG regs are unreliable until CMTG clock gating is disabled,
+	 * so we can only assume the default TRANS_CMTG_CHICKEN reg value and
+	 * sanity check this assumption with a double read, which presumably
+	 * returns the correct value even with clock gating on.
+	 *
+	 * Instead of the usual place for workarounds we apply this one here,
+	 * since TRANS_CMTG_CHICKEN is only accessible while DPLL0 is enabled.
+	 */
+	val = intel_de_read(i915, TRANS_CMTG_CHICKEN);
+	val = intel_de_read(i915, TRANS_CMTG_CHICKEN);
+	intel_de_write(i915, TRANS_CMTG_CHICKEN, DISABLE_DPT_CLK_GATING);
+	if (drm_WARN_ON(&i915->drm, val & ~DISABLE_DPT_CLK_GATING))
+		drm_dbg_kms(&i915->drm, "Unexpected flags in TRANS_CMTG_CHICKEN: %08x\n", val);
+}
+
 static void combo_pll_enable(struct drm_i915_private *dev_priv,
 			     struct intel_shared_dpll *pll)
 {
@@ -3764,6 +3789,8 @@ static void combo_pll_enable(struct drm_i915_private *dev_priv,
 
 	icl_pll_enable(dev_priv, pll, enable_reg);
 
+	adlp_cmtg_clock_gating_wa(dev_priv, pll);
+
 	/* DVFS post sequence would be here. See the comment above. */
 }
 
@@ -4273,7 +4300,12 @@ void intel_dpll_readout_hw_state(struct drm_i915_private *i915)
 static void sanitize_dpll_state(struct drm_i915_private *i915,
 				struct intel_shared_dpll *pll)
 {
-	if (!pll->on || pll->active_mask)
+	if (!pll->on)
+		return;
+
+	adlp_cmtg_clock_gating_wa(i915, pll);
+
+	if (pll->active_mask)
 		return;
 
 	drm_dbg_kms(&i915->drm,