i40e: Helper routine for Rx/Tx queue enable/disable wait

Introduce helper routines that would wait for the Rx/Tx queue
to reach the enable or disable state as requested.

Change-ID: I518d9d0e2afef3f45107af3b46e9af402ff587c3
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -84,6 +84,7 @@
 #define I40E_AQ_WORK_LIMIT            16
 #define I40E_MAX_USER_PRIORITY        8
 #define I40E_DEFAULT_MSG_ENABLE       4
+#define I40E_QUEUE_WAIT_RETRY_LIMIT   10
 
 #define I40E_NVM_VERSION_LO_SHIFT  0
 #define I40E_NVM_VERSION_LO_MASK   (0xff << I40E_NVM_VERSION_LO_SHIFT)

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -3231,6 +3231,35 @@ static void i40e_netpoll(struct net_device *netdev)
 }
 #endif
 
+/**
+ * i40e_pf_txq_wait - Wait for a PF's Tx queue to be enabled or disabled
+ * @pf: the PF being configured
+ * @pf_q: the PF queue
+ * @enable: enable or disable state of the queue
+ *
+ * This routine will wait for the given Tx queue of the PF to reach the
+ * enabled or disabled state.
+ * Returns -ETIMEDOUT in case of failing to reach the requested state after
+ * multiple retries; else will return 0 in case of success.
+ **/
+static int i40e_pf_txq_wait(struct i40e_pf *pf, int pf_q, bool enable)
+{
+	int i;
+	u32 tx_reg;
+
+	for (i = 0; i < I40E_QUEUE_WAIT_RETRY_LIMIT; i++) {
+		tx_reg = rd32(&pf->hw, I40E_QTX_ENA(pf_q));
+		if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
+			break;
+
+		udelay(10);
+	}
+	if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
 /**
  * i40e_vsi_control_tx - Start or stop a VSI's rings
  * @vsi: the VSI being configured
@@ -3240,7 +3269,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 {
 	struct i40e_pf *pf = vsi->back;
 	struct i40e_hw *hw = &pf->hw;
-	int i, j, pf_q;
+	int i, j, pf_q, ret = 0;
 	u32 tx_reg;
 
 	pf_q = vsi->base_queue;
@@ -3273,22 +3302,46 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 		wr32(hw, I40E_QTX_ENA(pf_q), tx_reg);
 
 		/* wait for the change to finish */
-		for (j = 0; j < 10; j++) {
-			tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
-			if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
-				break;
-
-			udelay(10);
-		}
-		if (j >= 10) {
-			dev_info(&pf->pdev->dev, "Tx ring %d %sable timeout\n",
-				 pf_q, (enable ? "en" : "dis"));
-			return -ETIMEDOUT;
+		ret = i40e_pf_txq_wait(pf, pf_q, enable);
+		if (ret) {
+			dev_info(&pf->pdev->dev,
+				 "%s: VSI seid %d Tx ring %d %sable timeout\n",
+				 __func__, vsi->seid, pf_q,
+				 (enable ? "en" : "dis"));
+			break;
 		}
 	}
 
 	if (hw->revision_id == 0)
 		mdelay(50);
+	return ret;
+}
+
+/**
+ * i40e_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
+ * @pf: the PF being configured
+ * @pf_q: the PF queue
+ * @enable: enable or disable state of the queue
+ *
+ * This routine will wait for the given Rx queue of the PF to reach the
+ * enabled or disabled state.
+ * Returns -ETIMEDOUT in case of failing to reach the requested state after
+ * multiple retries; else will return 0 in case of success.
+ **/
+static int i40e_pf_rxq_wait(struct i40e_pf *pf, int pf_q, bool enable)
+{
+	int i;
+	u32 rx_reg;
+
+	for (i = 0; i < I40E_QUEUE_WAIT_RETRY_LIMIT; i++) {
+		rx_reg = rd32(&pf->hw, I40E_QRX_ENA(pf_q));
+		if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
+			break;
+
+		udelay(10);
+	}
+	if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
+		return -ETIMEDOUT;
 
 	return 0;
 }
@@ -3302,7 +3355,7 @@ static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 {
 	struct i40e_pf *pf = vsi->back;
 	struct i40e_hw *hw = &pf->hw;
-	int i, j, pf_q;
+	int i, j, pf_q, ret = 0;
 	u32 rx_reg;
 
 	pf_q = vsi->base_queue;
@@ -3327,22 +3380,17 @@ static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 		wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
 
 		/* wait for the change to finish */
-		for (j = 0; j < 10; j++) {
-			rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
-
-			if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
-				break;
-
-			udelay(10);
-		}
-		if (j >= 10) {
-			dev_info(&pf->pdev->dev, "Rx ring %d %sable timeout\n",
-				 pf_q, (enable ? "en" : "dis"));
-			return -ETIMEDOUT;
+		ret = i40e_pf_rxq_wait(pf, pf_q, enable);
+		if (ret) {
+			dev_info(&pf->pdev->dev,
+				 "%s: VSI seid %d Rx ring %d %sable timeout\n",
+				 __func__, vsi->seid, pf_q,
+				 (enable ? "en" : "dis"));
+			break;
 		}
 	}
 
-	return 0;
+	return ret;
 }
 
 /**