Skip to content

L
linux
Commit 23d39547 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'qcom-arm64-fixes-for-6.2' of... 

Merge tag 'qcom-arm64-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DTS fixes for 6.2

The cluster idle issue was resolved on SM8250, so the change disabling
the cluster state is being reverted.

Issues where identified with the QMP PHY binding, that would prevent
enablement of Displayport and it was decided not to support the old
binding for the recently introduced SC8280XP, which broke USB. This
adjusts the USB PHY nodes to the new binding. The reset signal for the
first QMP PHY is corrected as well.

The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P,
to avoid instabilities caused by use of protected memory regions.
The compatible for the MSM8992 TCSR mutex is corrected as well.

Lastly SDHCI interconnects on SM8350 are corrected to match the
providers #interconnect-cells.

* tag 'qcom-arm64-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: msm8992-libra: Fix the memory map
  arm64: dts: qcom: msm8992: Don't use sfpb mutex
  arm64: dts: msm8994-angler: fix the memory map
  arm64: dts: qcom: sm8350: correct SDHCI interconnect arguments
  Revert "arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state"
  arm64: dts: msm8992-bullhead: add memory hole region
  arm64: dts: qcom: sc8280xp: fix USB-DP PHY nodes
  arm64: dts: qcom: sc8280xp: fix primary USB-DP PHY reset

Link: https://lore.kernel.org/r/20230110213724.2183668-1-andersson@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 985d7fef 69876bc6
Hide whitespace changes
Inline Side-by-side
Showing with 108 additions and 82 deletions
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
View file @ 23d39547
......@@ -3,6 +3,7 @@
* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
/dts-v1/;
......@@ -51,6 +52,11 @@ cont_splash_mem: memory@3400000 {
reg = <0 0x03400000 0 0x1200000>;
no-map;
};
removed_region: reserved@5000000 {
reg = <0 0x05000000 0 0x2200000>;
no-map;
};
};
};
......
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
View file @ 23d39547
......@@ -11,6 +11,12 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
/delete-node/ &adsp_mem;
/delete-node/ &audio_mem;
/delete-node/ &mpss_mem;
/delete-node/ &peripheral_region;
/delete-node/ &rmtfs_mem;
/ {
model = "Xiaomi Mi 4C";
compatible = "xiaomi,libra", "qcom,msm8992";
......@@ -70,25 +76,67 @@ reserved-memory {
#size-cells = <2>;
ranges;
/* This is for getting crash logs using Android downstream kernels */
ramoops@dfc00000 {
compatible = "ramoops";
reg = <0x0 0xdfc00000 0x0 0x40000>;
console-size = <0x10000>;
record-size = <0x10000>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
memory_hole: hole@6400000 {
reg = <0 0x06400000 0 0x600000>;
no-map;
};
memory_hole2: hole2@6c00000 {
reg = <0 0x06c00000 0 0x2400000>;
no-map;
};
mpss_mem: mpss@9000000 {
reg = <0 0x09000000 0 0x5a00000>;
no-map;
};
tzapp: tzapp@ea00000 {
reg = <0 0x0ea00000 0 0x1900000>;
no-map;
};
mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
reg = <0 0xca0b0000 0 0x10000>;
no-map;
};
rmtfs_mem: rmtfs@ca100000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xca100000 0 0x180000>;
no-map;
qcom,client-id = <1>;
};
modem_region: modem_region@9000000 {
reg = <0x0 0x9000000 0x0 0x5a00000>;
audio_mem: audio@cb400000 {
reg = <0 0xcb000000 0 0x400000>;
no-mem;
};
qseecom_mem: qseecom@cb400000 {
reg = <0 0xcb400000 0 0x1c00000>;
no-mem;
};
adsp_rfsa_mem: adsp-rfsa@cd000000 {
reg = <0 0xcd000000 0 0x10000>;
no-map;
};
tzapp: modem_region@ea00000 {
reg = <0x0 0xea00000 0x0 0x1900000>;
sensor_rfsa_mem: sensor-rfsa@cd010000 {
reg = <0 0xcd010000 0 0x10000>;
no-map;
};
ramoops@dfc00000 {
compatible = "ramoops";
reg = <0 0xdfc00000 0 0x40000>;
console-size = <0x10000>;
record-size = <0x10000>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
};
};
};
......@@ -130,11 +178,6 @@ &blsp2_uart2 {
status = "okay";
};
&peripheral_region {
reg = <0x0 0x7400000 0x0 0x1c00000>;
no-map;
};
&pm8994_spmi_regulators {
VDD_APC0: s8 {
regulator-min-microvolt = <680000>;
......
arch/arm64/boot/dts/qcom/msm8992.dtsi
View file @ 23d39547
......@@ -37,10 +37,6 @@ &rpmcc {
compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
};
&tcsr_mutex {
compatible = "qcom,sfpb-mutex";
};
&timer {
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
......
arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
View file @ 23d39547
......@@ -9,9 +9,6 @@
#include "msm8994.dtsi"
/* Angler's firmware does not report where the memory is allocated */
/delete-node/ &cont_splash_mem;
/ {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
......@@ -28,6 +25,22 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tzapp_mem: tzapp@4800000 {
reg = <0 0x04800000 0 0x1900000>;
no-map;
};
removed_region: reserved@6300000 {
reg = <0 0x06300000 0 0xD00000>;
no-map;
};
};
};
&blsp1_uart2 {
......
arch/arm64/boot/dts/qcom/sc8280xp.dtsi
View file @ 23d39547
......@@ -10,6 +10,7 @@
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
......@@ -762,7 +763,7 @@ gcc: clock-controller@100000 {
<0>,
<0>,
<0>,
<&usb_0_ssphy>,
<&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
......@@ -770,7 +771,7 @@ gcc: clock-controller@100000 {
<0>,
<0>,
<0>,
<&usb_1_ssphy>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
......@@ -1673,42 +1674,26 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
usb_0_qmpphy: phy-wrapper@88ec000 {
usb_0_qmpphy: phy@88eb000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
reg = <0 0x088ec000 0 0x1e4>,
<0 0x088eb000 0 0x40>,
<0 0x088ed000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0 0x088eb000 0 0x4000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_EUD_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
<&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
power-domains = <&gcc USB30_PRIM_GDSC>;
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
usb_0_ssphy: usb3-phy@88eb400 {
reg = <0 0x088eb400 0 0x100>,
<0 0x088eb600 0 0x3ec>,
<0 0x088ec400 0 0x364>,
<0 0x088eba00 0 0x100>,
<0 0x088ebc00 0 0x3ec>,
<0 0x088ec200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb0_phy_pipe_clk_src";
};
};
usb_1_hsphy: phy@8902000 {
......@@ -1725,42 +1710,26 @@ usb_1_hsphy: phy@8902000 {
status = "disabled";
};
usb_1_qmpphy: phy-wrapper@8904000 {
usb_1_qmpphy: phy@8903000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
reg = <0 0x08904000 0 0x1e4>,
<0 0x08903000 0 0x40>,
<0 0x08905000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0 0x08903000 0 0x4000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_CLKREF_CLK>,
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB30_SEC_GDSC>;
resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
<&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
power-domains = <&gcc USB30_SEC_GDSC>;
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
usb_1_ssphy: usb3-phy@8903400 {
reg = <0 0x08903400 0 0x100>,
<0 0x08903600 0 0x3ec>,
<0 0x08904400 0 0x364>,
<0 0x08903a00 0 0x100>,
<0 0x08903c00 0 0x3ec>,
<0 0x08904200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb1_phy_pipe_clk_src";
};
};
pmu@9091000 {
......@@ -1910,7 +1879,7 @@ usb_0_dwc3: usb@a600000 {
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x820 0x0>;
phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
......@@ -1964,7 +1933,7 @@ usb_1_dwc3: usb@a800000 {
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x860 0x0>;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
......
arch/arm64/boot/dts/qcom/sm8250.dtsi
View file @ 23d39547
......@@ -334,7 +334,6 @@ CLUSTER_SLEEP_0: cluster-sleep-0 {
exit-latency-us = <6562>;
min-residency-us = <9987>;
local-timer-stop;
status = "disabled";
};
};
};
......
arch/arm64/boot/dts/qcom/sm8350.dtsi
View file @ 23d39547
......@@ -2382,8 +2382,8 @@ sdhc_2: sdhci@8804000 {
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
resets = <&gcc GCC_SDCC2_BCR>;
interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
iommus = <&apps_smmu 0x4a0 0x0>;
power-domains = <&rpmhpd SM8350_CX>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7