USB: MXC: Add i.MX21 specific USB host controller driver.

This driver is a Full / Low speed only USB host for the i.MX21.
Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/arm/plat-mxc/include/mach/mx21-usbhost.h

+/*
+ *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MX21_USBH
+#define __ASM_ARCH_MX21_USBH
+
+enum mx21_usbh_xcvr {
+	/* Values below as used by hardware (HWMODE register) */
+	MX21_USBXCVR_TXDIF_RXDIF = 0,
+	MX21_USBXCVR_TXDIF_RXSE = 1,
+	MX21_USBXCVR_TXSE_RXDIF = 2,
+	MX21_USBXCVR_TXSE_RXSE = 3,
+};
+
+struct mx21_usbh_platform_data {
+	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
+	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
+	u16 	enable_host1:1,
+		enable_host2:1,
+		enable_otg_host:1, /* enable "OTG" port (as host) */
+		host1_xcverless:1, /* traceiverless host1 port */
+		host1_txenoe:1, /* output enable host1 transmit enable */
+		otg_ext_xcvr:1, /* external tranceiver for OTG port */
+		unused:10;
+};
+
+#endif /* __ASM_ARCH_MX21_USBH */

drivers/usb/Makefile

@@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_HWA_HCD)	+= host/
 obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
+obj-$(CONFIG_USB_IMX21_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 

drivers/usb/host/Kconfig

@@ -399,3 +399,14 @@ config USB_HWA_HCD
 
 	  To compile this driver a module, choose M here: the module
 	  will be called "hwa-hc".
+
+config USB_IMX21_HCD
+       tristate "iMX21 HCD support"
+       depends on USB && ARM && MACH_MX21
+       help
+         This driver enables support for the on-chip USB host in the
+         iMX21 processor.
+
+         To compile this driver as a module, choose M here: the
+         module will be called "imx21-hcd".
+

drivers/usb/host/Makefile

@@ -32,3 +32,5 @@ obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
 obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
 obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
+obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
+