arm64: dts: imx93: add the Flex-CAN stop mode by GPR

imx93 A0 chip use the internal q-channel handshake signal in LPCG
and CCM to automatically handle the Flex-CAN stop mode. But this
method meet issue when do the system PM stress test. IC can't fix
it easily. So in the new imx93 A1 chip, IC drop this method, and
involve back the old way，use the GPR method to trigger the Flex-CAN
stop mode signal. Now NXP claim to drop imx93 A0, and only support
imx93 A1. So here add the stop mode through GPR.

This patch also fix a typo for aonmix_ns_gpr.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20230726112458.3524165-1-haibo.chen@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -185,7 +185,7 @@ aips1: bus@44000000 {
 			#size-cells = <1>;
 			ranges;
 
-			anomix_ns_gpr: syscon@44210000 {
+			aonmix_ns_gpr: syscon@44210000 {
 				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
 				reg = <0x44210000 0x1000>;
 			};
@@ -319,6 +319,7 @@ flexcan1: can@443a0000 {
 				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
 				assigned-clock-rates = <40000000>;
 				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
 				status = "disabled";
 			};
 
@@ -591,6 +592,7 @@ flexcan2: can@425b0000 {
 				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
 				assigned-clock-rates = <40000000>;
 				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
 				status = "disabled";
 			};