Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (34 commits)
  sh: Convert to generic show_interrupts.
  sh: Wire up new fhandle and clock_adjtime syscalls.
  sh: modify platform_device for sh_eth driver
  sh: add GETHER's platform_device in board-sh7757lcr
  sh: update sh7757lcr_defconfig
  sh: add platform_device of tmio_mmc and sh_mmcif to sh7757lcr
  sh: dmaengine support for SH7757
  sh: add mmc clock in clock-sh7757
  sh: add spi_board_info in sh7757lcr
  sh: add platform_device for SPI
  sh: add USB_ARCH_HAS_EHCI and OHCI for SH7757
  sh: Rename cpuidle states to fit general conventions
  serial: sh-sci: fix deadlock when resuming from S3 sleep
  sh: Enable CONFIG_GCOV_PROFILE_ALL for sh
  sh: Fix up async PCIe probing on SMP.
  serial: sh-sci: Kill off the special earlyprintk device.
  serial: sh-sci: Use dev_name() for region reservations.
  serial: sh-sci: Fix up earlyprintk port mapping.
  serial: sh-sci: Limit early console to one device.
  serial: sh-sci: Fix up break timer scheduling race.
  ...

arch/sh/Kconfig

@@ -25,6 +25,7 @@ config SUPERH
 	select GENERIC_ATOMIC64
 	# Support the deprecated APIs until MFD and GPIOLIB catch up.
 	select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
+	select GENERIC_IRQ_SHOW
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -434,6 +435,8 @@ config CPU_SUBTYPE_SH7757
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select USB_ARCH_HAS_OHCI
+	select USB_ARCH_HAS_EHCI
 	help
 	  Select SH7757 if you have a SH4A SH7757 CPU.
 

arch/sh/boards/board-espt.c

@@ -66,6 +66,11 @@ static struct resource sh_eth_resources[] = {
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
 	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
+	}, {
+
 		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
 	},
@@ -74,6 +79,8 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh7763_eth_pdata = {
 	.phy = 0,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_GIGABIT,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device espt_eth_device = {

arch/sh/boards/board-sh7757lcr.c

@@ -15,6 +15,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <cpu/sh7757.h>
 #include <asm/sh_eth.h>
 #include <asm/heartbeat.h>
@@ -44,6 +47,17 @@ static struct platform_device heartbeat_device = {
 };
 
 /* Fast Ethernet */
+#define GBECONT		0xffc10100
+#define GBECONT_RMII1	BIT(17)
+#define GBECONT_RMII0	BIT(16)
+static void sh7757_eth_set_mdio_gate(unsigned long addr)
+{
+	if ((addr & 0x00000fff) < 0x0800)
+		writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
+	else
+		writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
+}
+
 static struct resource sh_eth0_resources[] = {
 	{
 		.start  = 0xfef00000,
@@ -59,6 +73,8 @@ static struct resource sh_eth0_resources[] = {
 static struct sh_eth_plat_data sh7757_eth0_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_FAST_SH4,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
 };
 
 static struct platform_device sh7757_eth0_device = {
@@ -86,6 +102,8 @@ static struct resource sh_eth1_resources[] = {
 static struct sh_eth_plat_data sh7757_eth1_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_FAST_SH4,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
 };
 
 static struct platform_device sh7757_eth1_device = {
@@ -98,10 +116,173 @@ static struct platform_device sh7757_eth1_device = {
 	},
 };
 
+static void sh7757_eth_giga_set_mdio_gate(unsigned long addr)
+{
+	if ((addr & 0x00000fff) < 0x0800) {
+		gpio_set_value(GPIO_PTT4, 1);
+		writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
+	} else {
+		gpio_set_value(GPIO_PTT4, 0);
+		writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
+	}
+}
+
+static struct resource sh_eth_giga0_resources[] = {
+	{
+		.start  = 0xfee00000,
+		.end    = 0xfee007ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 315,
+		.end    = 315,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
+	.phy = 18,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_GIGABIT,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga0_device = {
+	.name		= "sh-eth",
+	.resource	= sh_eth_giga0_resources,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga0_pdata,
+	},
+};
+
+static struct resource sh_eth_giga1_resources[] = {
+	{
+		.start  = 0xfee00800,
+		.end    = 0xfee00fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 316,
+		.end    = 316,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
+	.phy = 19,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_GIGABIT,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga1_device = {
+	.name		= "sh-eth",
+	.resource	= sh_eth_giga1_resources,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga1_pdata,
+	},
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.start	= 0xffcb0000,
+		.end	= 0xffcb00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 211,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 212,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
+	.chan_priv_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.chan_priv_rx	= SHDMA_SLAVE_MMCIF_RX,
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.dma		= &sh7757lcr_mmcif_dma,
+	.sup_pclk	= 0x0f,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI_RX,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct resource sdhi_resources[] = {
+	[0] = {
+		.start  = 0xffe50000,
+		.end    = 0xffe501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 20,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi_resources),
+	.resource       = sdhi_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi_info,
+	},
+};
+
 static struct platform_device *sh7757lcr_devices[] __initdata = {
 	&heartbeat_device,
 	&sh7757_eth0_device,
 	&sh7757_eth1_device,
+	&sh7757_eth_giga0_device,
+	&sh7757_eth_giga1_device,
+	&sh_mmcif_device,
+	&sdhi_device,
+};
+
+static struct flash_platform_data spi_flash_data = {
+	.name = "m25p80",
+	.type = "m25px64",
+};
+
+static struct spi_board_info spi_board_info[] = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &spi_flash_data,
+	},
 };
 
 static int __init sh7757lcr_devices_setup(void)
@@ -332,6 +513,10 @@ static int __init sh7757lcr_devices_setup(void)
 	gpio_request(GPIO_PTT5, NULL);		/* eMMC_PRST# */
 	gpio_direction_output(GPIO_PTT5, 1);
 
+	/* register SPI device information */
+	spi_register_board_info(spi_board_info,
+				ARRAY_SIZE(spi_board_info));
+
 	/* General platform */
 	return platform_add_devices(sh7757lcr_devices,
 				    ARRAY_SIZE(sh7757lcr_devices));

arch/sh/boards/mach-ecovec24/setup.c

@@ -142,6 +142,8 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_FAST_SH4,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 	.ether_link_active_low = 1
 };
 

arch/sh/boards/mach-sh7763rdp/setup.c

@@ -74,6 +74,10 @@ static struct resource sh_eth_resources[] = {
 		.start  = 0xFEE00800,   /* use eth1 */
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
 	}, {
 		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
@@ -83,6 +87,8 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh7763_eth_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_GIGABIT,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device sh7763rdp_eth_device = {

arch/sh/boot/compressed/Makefile

@@ -11,6 +11,8 @@ targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 
 OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
 
+GCOV_PROFILE := n
+
 #
 # IMAGE_OFFSET is the load offset of the compression loader
 #

arch/sh/configs/sh7757lcr_defconfig

@@ -38,7 +38,15 @@ CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_VITESSE_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -53,8 +61,17 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_SH=y
 # CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_MFD_SH_MOBILE_SDHI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_TMIO=y
+CONFIG_MMC_SH_MMCIF=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_ISO9660_FS=y

arch/sh/drivers/pci/pcie-sh7786.c

 /*
  * Low-Level PCI Express Support for the SH7786
  *
- *  Copyright (C) 2009 - 2010  Paul Mundt
+ *  Copyright (C) 2009 - 2011  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define pr_fmt(fmt) "PCI: " fmt
+
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/async.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
@@ -31,7 +34,7 @@ static unsigned int nr_ports;
 
 static struct sh7786_pcie_hwops {
 	int (*core_init)(void);
-	int (*port_init_hw)(struct sh7786_pcie_port *port);
+	async_func_ptr *port_init_hw;
 } *sh7786_pcie_hwops;
 
 static struct resource sh7786_pci0_resources[] = {
@@ -474,8 +477,9 @@ static int __init sh7786_pcie_core_init(void)
 	return test_mode_pin(MODE_PIN12) ? 3 : 2;
 }
 
-static int __init sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
+static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie)
 {
+	struct sh7786_pcie_port *port = data;
 	int ret;
 
 	/*
@@ -488,18 +492,30 @@ static int __init sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
 	 * Setup clocks, needed both for PHY and PCIe registers.
 	 */
 	ret = pcie_clk_init(port);
-	if (unlikely(ret < 0))
-		return ret;
+	if (unlikely(ret < 0)) {
+		pr_err("clock initialization failed for port#%d\n",
+		       port->index);
+		return;
+	}
 
 	ret = phy_init(port);
-	if (unlikely(ret < 0))
-		return ret;
+	if (unlikely(ret < 0)) {
+		pr_err("phy initialization failed for port#%d\n",
+		       port->index);
+		return;
+	}
 
 	ret = pcie_init(port);
-	if (unlikely(ret < 0))
-		return ret;
+	if (unlikely(ret < 0)) {
+		pr_err("core initialization failed for port#%d\n",
+			       port->index);
+		return;
+	}
 
-	return register_pci_controller(port->hose);
+	/* In the interest of preserving device ordering, synchronize */
+	async_synchronize_cookie(cookie);
+
+	register_pci_controller(port->hose);
 }
 
 static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
@@ -510,7 +526,7 @@ static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
 static int __init sh7786_pcie_init(void)
 {
 	struct clk *platclk;
-	int ret = 0, i;
+	int i;
 
 	printk(KERN_NOTICE "PCI: Starting initialization.\n");
 
@@ -552,14 +568,10 @@ static int __init sh7786_pcie_init(void)
 		port->hose		= sh7786_pci_channels + i;
 		port->hose->io_map_base	= port->hose->resources[0].start;
 
-		ret |= sh7786_pcie_hwops->port_init_hw(port);
+		async_schedule(sh7786_pcie_hwops->port_init_hw, port);
 	}
 
-	if (unlikely(ret)) {
-		clk_disable(platclk);
-		clk_put(platclk);
-		return ret;
-	}
+	async_synchronize_full();
 
 	return 0;
 }

arch/sh/include/asm/unistd_32.h

@@ -369,8 +369,11 @@
 #define __NR_recvmsg		356
 #define __NR_recvmmsg		357
 #define __NR_accept4		358
+#define __NR_name_to_handle_at	359
+#define __NR_open_by_handle_at	360
+#define __NR_clock_adjtime	361
 
-#define NR_syscalls 359
+#define NR_syscalls 362
 
 #ifdef __KERNEL__
 

arch/sh/include/asm/unistd_64.h

@@ -390,10 +390,13 @@
 #define __NR_fanotify_init	367
 #define __NR_fanotify_mark	368
 #define __NR_prlimit64		369
+#define __NR_name_to_handle_at	370
+#define __NR_open_by_handle_at	371
+#define __NR_clock_adjtime	372
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 370
+#define NR_syscalls 373
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/sh/include/cpu-sh4/cpu/dma-register.h

@@ -40,6 +40,11 @@
 #define CHCR_TS_LOW_SHIFT	3
 #define CHCR_TS_HIGH_MASK	0
 #define CHCR_TS_HIGH_SHIFT	0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0x00100000
+#define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define CHCR_TS_LOW_MASK	0x00000018
 #define CHCR_TS_LOW_SHIFT	3

arch/sh/include/cpu-sh4/cpu/sh7757.h

@@ -251,4 +251,36 @@ enum {
 	GPIO_FN_ON_DQ3,	GPIO_FN_ON_DQ2,	GPIO_FN_ON_DQ1,	GPIO_FN_ON_DQ0,
 };
 
+enum {
+	SHDMA_SLAVE_SDHI_TX,
+	SHDMA_SLAVE_SDHI_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_RIIC0_TX,
+	SHDMA_SLAVE_RIIC0_RX,
+	SHDMA_SLAVE_RIIC1_TX,
+	SHDMA_SLAVE_RIIC1_RX,
+	SHDMA_SLAVE_RIIC2_TX,
+	SHDMA_SLAVE_RIIC2_RX,
+	SHDMA_SLAVE_RIIC3_TX,
+	SHDMA_SLAVE_RIIC3_RX,
+	SHDMA_SLAVE_RIIC4_TX,
+	SHDMA_SLAVE_RIIC4_RX,
+	SHDMA_SLAVE_RIIC5_TX,
+	SHDMA_SLAVE_RIIC5_RX,
+	SHDMA_SLAVE_RIIC6_TX,
+	SHDMA_SLAVE_RIIC6_RX,
+	SHDMA_SLAVE_RIIC7_TX,
+	SHDMA_SLAVE_RIIC7_RX,
+	SHDMA_SLAVE_RIIC8_TX,
+	SHDMA_SLAVE_RIIC8_RX,
+	SHDMA_SLAVE_RIIC9_TX,
+	SHDMA_SLAVE_RIIC9_RX,
+};
 #endif /* __ASM_SH7757_H__ */

arch/sh/kernel/cpu/sh4a/clock-sh7757.c

@@ -77,9 +77,10 @@ struct clk div4_clks[DIV4_NR] = {
 
 #define MSTPCR0		0xffc80030
 #define MSTPCR1		0xffc80034
+#define MSTPCR2		0xffc10028
 
 enum { MSTP004, MSTP000, MSTP114, MSTP113, MSTP112,
-       MSTP111, MSTP110, MSTP103, MSTP102,
+       MSTP111, MSTP110, MSTP103, MSTP102, MSTP220,
        MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -95,6 +96,9 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP110] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 10, 0),
 	[MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
 	[MSTP102] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 2, 0),
+
+	/* MSTPCR2 */
+	[MSTP220] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 20, 0),
 };
 
 #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
@@ -140,6 +144,7 @@ static struct clk_lookup lookups[] = {
 		.clk		= &mstp_clks[MSTP110],
 	},
 	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP102]),
+	CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
 };
 
 int __init arch_clk_init(void)

arch/sh/kernel/cpu/shmobile/cpuidle.c

@@ -75,7 +75,7 @@ void sh_mobile_setup_cpuidle(void)
 	i = CPUIDLE_DRIVER_STATE_START;
 
 	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
 	strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
 	state->exit_latency = 1;
 	state->target_residency = 1 * 2;
@@ -88,7 +88,7 @@ void sh_mobile_setup_cpuidle(void)
 
 	if (sh_mobile_sleep_supported & SUSP_SH_SF) {
 		state = &dev->states[i++];
-		snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
+		snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
 		strncpy(state->desc, "SuperH Sleep Mode [SF]",
 			CPUIDLE_DESC_LEN);
 		state->exit_latency = 100;
@@ -101,7 +101,7 @@ void sh_mobile_setup_cpuidle(void)
 
 	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
 		state = &dev->states[i++];
-		snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
+		snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
 		strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
 			CPUIDLE_DESC_LEN);
 		state->exit_latency = 2300;

arch/sh/kernel/irq.c

@@ -34,9 +34,9 @@ void ack_bad_irq(unsigned int irq)
 
 #if defined(CONFIG_PROC_FS)
 /*
- * /proc/interrupts printing:
+ * /proc/interrupts printing for arch specific interrupts
  */
-static int show_other_interrupts(struct seq_file *p, int prec)
+int arch_show_interrupts(struct seq_file *p, int prec)
 {
 	int j;
 
@@ -49,63 +49,6 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 
 	return 0;
 }
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	unsigned long flags, any_count = 0;
-	int i = *(loff_t *)v, j, prec;
-	struct irqaction *action;
-	struct irq_desc *desc;
-	struct irq_data *data;
-	struct irq_chip *chip;
-
-	if (i > nr_irqs)
-		return 0;
-
-	for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec)
-		j *= 10;
-
-	if (i == nr_irqs)
-		return show_other_interrupts(p, prec);
-
-	if (i == 0) {
-		seq_printf(p, "%*s", prec + 8, "");
-		for_each_online_cpu(j)
-			seq_printf(p, "CPU%-8d", j);
-		seq_putc(p, '\n');
-	}
-
-	desc = irq_to_desc(i);
-	if (!desc)
-		return 0;
-
-	data = irq_get_irq_data(i);
-	chip = irq_data_get_irq_chip(data);
-
-	raw_spin_lock_irqsave(&desc->lock, flags);
-	for_each_online_cpu(j)
-		any_count |= kstat_irqs_cpu(i, j);
-	action = desc->action;
-	if (!action && !any_count)
-		goto out;
-
-	seq_printf(p, "%*d: ", prec, i);
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-	seq_printf(p, " %14s", chip->name);
-	seq_printf(p, "-%-8s", desc->name);
-
-	if (action) {
-		seq_printf(p, "  %s", action->name);
-		while ((action = action->next) != NULL)
-			seq_printf(p, ", %s", action->name);
-	}
-
-	seq_putc(p, '\n');
-out:
-	raw_spin_unlock_irqrestore(&desc->lock, flags);
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_IRQSTACKS

arch/sh/kernel/syscalls_32.S

@@ -376,3 +376,6 @@ ENTRY(sys_call_table)
 	.long sys_recvmsg
 	.long sys_recvmmsg
 	.long sys_accept4
+	.long sys_name_to_handle_at
+	.long sys_open_by_handle_at	/* 360 */
+	.long sys_clock_adjtime

arch/sh/kernel/syscalls_64.S

@@ -396,3 +396,6 @@ sys_call_table:
 	.long sys_fanotify_init
 	.long sys_fanotify_mark
 	.long sys_prlimit64
+	.long sys_name_to_handle_at	/* 370 */
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime

arch/sh/mm/Makefile

@@ -42,6 +42,8 @@ obj-$(CONFIG_IOREMAP_FIXED)	+= ioremap_fixed.o
 obj-$(CONFIG_UNCACHED_MAPPING)	+= uncached.o
 obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
 
+GCOV_PROFILE_pmb.o := n
+
 # Special flags for fault_64.o.  This puts restrictions on the number of
 # caller-save registers that the compiler can target when building this file.
 # This is required because the code is called from a context in entry.S where

drivers/tty/serial/sh-sci.h

@@ -54,9 +54,6 @@
 # define PBCR 0xa4050102
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 # define SCSPTR0 0xffe00010	/* 16 bit SCIF */
-# define SCSPTR1 0xffe10010	/* 16 bit SCIF */
-# define SCSPTR2 0xffe20010	/* 16 bit SCIF */
-# define SCSPTR3 0xffe30010	/* 16 bit SCIF */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 # define PADR			0xA4050120
 # define PSDR			0xA405013e
@@ -69,77 +66,42 @@
 # define SCIF_ORER		0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723)
 # define SCSPTR0                0xa4050160
-# define SCSPTR1                0xa405013e
-# define SCSPTR2                0xa4050160
-# define SCSPTR3                0xa405013e
-# define SCSPTR4                0xa4050128
-# define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7724)
 # define SCIF_ORER              0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
-#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-# define SCIF_PTR2_OFFS    0x0000020
-# define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757)
 # define SCSPTR0 0xfe4b0020
-# define SCSPTR1 0xfe4b0020
-# define SCSPTR2 0xfe4b0020
 # define SCIF_ORER 0x0001
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
-# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
-# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
-# define SCSPTR1 0xff924020 /* 16 bit SCIF */
-# define SCSPTR2 0xff925020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define SCSPTR0	0xffe00024	/* 16 bit SCIF */
-# define SCSPTR1	0xffe10024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SH7786)
 # define SCSPTR0	0xffea0024	/* 16 bit SCIF */
-# define SCSPTR1	0xffeb0024	/* 16 bit SCIF */
-# define SCSPTR2	0xffec0024	/* 16 bit SCIF */
-# define SCSPTR3	0xffed0024	/* 16 bit SCIF */
-# define SCSPTR4	0xffee0024	/* 16 bit SCIF */
-# define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
-# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
-# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
-# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
-# if defined(CONFIG_CPU_SUBTYPE_SH7201)
-#  define SCSPTR4 0xfffeA020 /* 16 bit SCIF */
-#  define SCSPTR5 0xfffeA820 /* 16 bit SCIF */
-#  define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
-#  define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
-# endif
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
-# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
-# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 # define SCSPTR0 0xffc30020		/* 16 bit SCIF */
-# define SCSPTR1 0xffc40020		/* 16 bit SCIF */
-# define SCSPTR2 0xffc50020		/* 16 bit SCIF */
-# define SCSPTR3 0xffc60020		/* 16 bit SCIF */
 # define SCIF_ORER 0x0001		/* Overrun error bit */
 #else
 # error CPU subtype not defined
@@ -411,7 +373,6 @@ SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
 SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 SCIF_FNS(SCFDR,				0,  0, 0x1C, 16)
-SCIF_FNS(SCSPTR2,			0,  0, 0x20, 16)
 SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)

drivers/watchdog/Kconfig

@@ -1083,14 +1083,6 @@ config SH_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called shwdt.
 
-config SH_WDT_MMAP
-	bool "Allow mmap of SH WDT"
-	default n
-	depends on SH_WDT
-	help
-	  If you say Y here, user applications will be able to mmap the
-	  WDT/CPG registers.
-
 # SPARC Architecture
 
 # SPARC64 Architecture

include/linux/serial_sci.h

@@ -34,28 +34,32 @@ enum {
 	SCIx_NR_IRQS,
 };
 
+#define SCIx_IRQ_MUXED(irq)		\
+{					\
+	[SCIx_ERI_IRQ]	= (irq),	\
+	[SCIx_RXI_IRQ]	= (irq),	\
+	[SCIx_TXI_IRQ]	= (irq),	\
+	[SCIx_BRI_IRQ]	= (irq),	\
+}
+
 struct device;
 
 /*
  * Platform device specific platform_data struct
  */
 struct plat_sci_port {
-	void __iomem	*membase;		/* io cookie */
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	type;			/* SCI / SCIF / IRDA */
 	upf_t		flags;			/* UPF_* flags */
-	char		*clk;			/* clock string */
 
 	unsigned int	scbrr_algo_id;		/* SCBRR calculation algo */
 	unsigned int	scscr;			/* SCSCR initialization */
 
 	struct device	*dma_dev;
 
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-	unsigned int dma_slave_tx;
-	unsigned int dma_slave_rx;
-#endif
+	unsigned int	dma_slave_tx;
+	unsigned int	dma_slave_rx;
 };
 
 #endif /* __LINUX_SERIAL_SCI_H */

kernel/gcov/Kconfig

@@ -34,7 +34,7 @@ config GCOV_KERNEL
 config GCOV_PROFILE_ALL
 	bool "Profile entire Kernel"
 	depends on GCOV_KERNEL
-	depends on S390 || X86 || (PPC && EXPERIMENTAL) || MICROBLAZE
+	depends on SUPERH || S390 || X86 || (PPC && EXPERIMENTAL) || MICROBLAZE
 	default n
 	---help---
 	This options activates profiling for the entire kernel.