arm64: dts: marvell: re-order RTC nodes in Marvell CP110 description

In both the CP110 master and slave description, the node describing
the RTC was at the wrong place when taking into account increasing
register addresses. Interestingly, it was not even at the same (wrong)
place in both files.

This commit adjusts that, making the master and slave descriptions
more aligned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -115,6 +115,13 @@ cpm_icu: interrupt-controller@1e0000 {
 				msi-parent = <&gicp>;
 			};
 
+			cpm_rtc: rtc@284000 {
+				compatible = "marvell,armada-8k-rtc";
+				reg = <0x284000 0x20>, <0x284080 0x24>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			cpm_syscon0: system-controller@440000 {
 				compatible = "syscon", "simple-mfd";
 				reg = <0x440000 0x1000>;
@@ -155,13 +162,6 @@ cpm_gpio2: gpio@140 {
 				};
 			};
 
-			cpm_rtc: rtc@284000 {
-				compatible = "marvell,armada-8k-rtc";
-				reg = <0x284000 0x20>, <0x284080 0x24>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
 			cpm_sata0: sata@540000 {
 				compatible = "marvell,armada-8k-ahci",
 					     "generic-ahci";

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -60,13 +60,6 @@ config-space@f4000000 {
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf4000000 0x2000000>;
 
-			cps_rtc: rtc@284000 {
-				compatible = "marvell,armada-8k-rtc";
-				reg = <0x284000 0x20>, <0x284080 0x24>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
 			cps_ethernet: ethernet@0 {
 				compatible = "marvell,armada-7k-pp22";
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
@@ -122,6 +115,13 @@ cps_icu: interrupt-controller@1e0000 {
 				msi-parent = <&gicp>;
 			};
 
+			cps_rtc: rtc@284000 {
+				compatible = "marvell,armada-8k-rtc";
+				reg = <0x284000 0x20>, <0x284080 0x24>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			cps_syscon0: system-controller@440000 {
 				compatible = "syscon", "simple-mfd";
 				reg = <0x440000 0x1000>;