Commit 249fa821 authored by Bastien Nocera's avatar Bastien Nocera Committed by Greg Kroah-Hartman

USB: Add driver to control USB fast charge for iOS devices

iOS devices will not draw more than 500mA unless instructed to do so.
Setting the charge type power supply property to "fast" tells the device
to start drawing more power, using the same procedure that official
"MFi" chargers would.
Signed-off-by: default avatarBastien Nocera <hadess@hadess.net>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191016093933.693-7-hadess@hadess.netSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 77419aa4
......@@ -17182,6 +17182,12 @@ S: Maintained
F: Documentation/usb/acm.rst
F: drivers/usb/class/cdc-acm.*
USB APPLE MFI FASTCHARGE DRIVER
M: Bastien Nocera <hadess@hadess.net>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/misc/apple-mfi-fastcharge.c
USB AR5523 WIRELESS DRIVER
M: Pontus Fuchs <pontus.fuchs@gmail.com>
L: linux-wireless@vger.kernel.org
......
......@@ -137,6 +137,16 @@ config USB_APPLEDISPLAY
Say Y here if you want to control the backlight of Apple Cinema
Displays over USB. This driver provides a sysfs interface.
config APPLE_MFI_FASTCHARGE
tristate "Fast charge control for iOS devices"
select POWER_SUPPLY
help
Say Y here if you want to control whether iOS devices will
fast charge from the USB interface, as implemented in "MFi"
chargers.
It is safe to say M here.
source "drivers/usb/misc/sisusbvga/Kconfig"
config USB_LD
......
......@@ -11,6 +11,7 @@ obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_EMI62) += emi62.o
obj-$(CONFIG_USB_EZUSB_FX2) += ezusb.o
obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
obj-$(CONFIG_APPLE_MFI_FASTCHARGE) += apple-mfi-fastcharge.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
......
// SPDX-License-Identifier: GPL-2.0+
/*
* Fast-charge control for Apple "MFi" devices
*
* Copyright (C) 2019 Bastien Nocera <hadess@hadess.net>
*/
/* Standard include files */
#include <linux/module.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
#include <linux/usb.h>
MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
MODULE_DESCRIPTION("Fast-charge control for Apple \"MFi\" devices");
MODULE_LICENSE("GPL");
#define TRICKLE_CURRENT_MA 0
#define FAST_CURRENT_MA 2500
#define APPLE_VENDOR_ID 0x05ac /* Apple */
/* The product ID is defined as starting with 0x12nn, as per the
* "Choosing an Apple Device USB Configuration" section in
* release R9 (2012) of the "MFi Accessory Hardware Specification"
*
* To distinguish an Apple device, a USB host can check the device
* descriptor of attached USB devices for the following fields:
* ■ Vendor ID: 0x05AC
* ■ Product ID: 0x12nn
*
* Those checks will be done in .match() and .probe().
*/
static const struct usb_device_id mfi_fc_id_table[] = {
{ .idVendor = APPLE_VENDOR_ID,
.match_flags = USB_DEVICE_ID_MATCH_VENDOR },
{},
};
MODULE_DEVICE_TABLE(usb, mfi_fc_id_table);
/* Driver-local specific stuff */
struct mfi_device {
struct usb_device *udev;
struct power_supply *battery;
int charge_type;
};
static int apple_mfi_fc_set_charge_type(struct mfi_device *mfi,
const union power_supply_propval *val)
{
int current_ma;
int retval;
__u8 request_type;
if (mfi->charge_type == val->intval) {
dev_dbg(&mfi->udev->dev, "charge type %d already set\n",
mfi->charge_type);
return 0;
}
switch (val->intval) {
case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
current_ma = TRICKLE_CURRENT_MA;
break;
case POWER_SUPPLY_CHARGE_TYPE_FAST:
current_ma = FAST_CURRENT_MA;
break;
default:
return -EINVAL;
}
request_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
retval = usb_control_msg(mfi->udev, usb_sndctrlpipe(mfi->udev, 0),
0x40, /* Vendor‐defined power request */
request_type,
current_ma, /* wValue, current offset */
current_ma, /* wIndex, current offset */
NULL, 0, USB_CTRL_GET_TIMEOUT);
if (retval) {
dev_dbg(&mfi->udev->dev, "retval = %d\n", retval);
return retval;
}
mfi->charge_type = val->intval;
return 0;
}
static int apple_mfi_fc_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct mfi_device *mfi = power_supply_get_drvdata(psy);
dev_dbg(&mfi->udev->dev, "prop: %d\n", psp);
switch (psp) {
case POWER_SUPPLY_PROP_CHARGE_TYPE:
val->intval = mfi->charge_type;
break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
break;
default:
return -ENODATA;
}
return 0;
}
static int apple_mfi_fc_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct mfi_device *mfi = power_supply_get_drvdata(psy);
int ret;
dev_dbg(&mfi->udev->dev, "prop: %d\n", psp);
ret = pm_runtime_get_sync(&mfi->udev->dev);
if (ret < 0)
return ret;
switch (psp) {
case POWER_SUPPLY_PROP_CHARGE_TYPE:
ret = apple_mfi_fc_set_charge_type(mfi, val);
break;
default:
ret = -EINVAL;
}
pm_runtime_mark_last_busy(&mfi->udev->dev);
pm_runtime_put_autosuspend(&mfi->udev->dev);
return ret;
}
static int apple_mfi_fc_property_is_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
switch (psp) {
case POWER_SUPPLY_PROP_CHARGE_TYPE:
return 1;
default:
return 0;
}
}
static enum power_supply_property apple_mfi_fc_properties[] = {
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_SCOPE
};
static const struct power_supply_desc apple_mfi_fc_desc = {
.name = "apple_mfi_fastcharge",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = apple_mfi_fc_properties,
.num_properties = ARRAY_SIZE(apple_mfi_fc_properties),
.get_property = apple_mfi_fc_get_property,
.set_property = apple_mfi_fc_set_property,
.property_is_writeable = apple_mfi_fc_property_is_writeable
};
static int mfi_fc_probe(struct usb_device *udev)
{
struct power_supply_config battery_cfg = {};
struct mfi_device *mfi = NULL;
int err;
/* See comment above mfi_fc_id_table[] */
if (udev->descriptor.idProduct < 0x1200 ||
udev->descriptor.idProduct > 0x12ff) {
return -ENODEV;
}
mfi = kzalloc(sizeof(struct mfi_device), GFP_KERNEL);
if (!mfi) {
err = -ENOMEM;
goto error;
}
battery_cfg.drv_data = mfi;
mfi->charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
mfi->battery = power_supply_register(&udev->dev,
&apple_mfi_fc_desc,
&battery_cfg);
if (IS_ERR(mfi->battery)) {
dev_err(&udev->dev, "Can't register battery\n");
err = PTR_ERR(mfi->battery);
goto error;
}
mfi->udev = usb_get_dev(udev);
dev_set_drvdata(&udev->dev, mfi);
return 0;
error:
kfree(mfi);
return err;
}
static void mfi_fc_disconnect(struct usb_device *udev)
{
struct mfi_device *mfi;
mfi = dev_get_drvdata(&udev->dev);
if (mfi->battery)
power_supply_unregister(mfi->battery);
dev_set_drvdata(&udev->dev, NULL);
usb_put_dev(mfi->udev);
kfree(mfi);
}
static struct usb_device_driver mfi_fc_driver = {
.name = "apple-mfi-fastcharge",
.probe = mfi_fc_probe,
.disconnect = mfi_fc_disconnect,
.id_table = mfi_fc_id_table,
.generic_subclass = 1,
};
static int __init mfi_fc_driver_init(void)
{
return usb_register_device_driver(&mfi_fc_driver, THIS_MODULE);
}
static void __exit mfi_fc_driver_exit(void)
{
usb_deregister_device_driver(&mfi_fc_driver);
}
module_init(mfi_fc_driver_init);
module_exit(mfi_fc_driver_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment