Commit 24a572bf authored by Adam Ford's avatar Adam Ford Committed by Shawn Guo

arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm

Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which
fixes the timeout error.

Fixes:  a05ea40e ("arm64: dts: imx: Add i.mx8mm dtsi support")
Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 33eae7fb
...@@ -740,7 +740,7 @@ sdma1: dma-controller@30bd0000 { ...@@ -740,7 +740,7 @@ sdma1: dma-controller@30bd0000 {
reg = <0x30bd0000 0x10000>; reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
<&clk IMX8MM_CLK_SDMA1_ROOT>; <&clk IMX8MM_CLK_AHB>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
#dma-cells = <3>; #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment