drm/panel: Add driver for JDI LPM102A188A

The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C.
This driver is based on the downstream GPLv2 driver released by Google
written by Sean Paul [1], which was then adapted to the newer kernel APIs.

[1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.cSigned-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-3-diogo.ivo@tecnico.ulisboa.pt

drivers/gpu/drm/panel/Kconfig

@@ -244,6 +244,17 @@ config DRM_PANEL_JDI_LT070ME05000
 	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
 	  24 bit per pixel.
 
+config DRM_PANEL_JDI_LPM102A188A
+	tristate "JDI LPM102A188A DSI panel"
+	depends on OF && GPIOLIB
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for JDI LPM102A188A DSI
+	  command mode panel as found in Google Pixel C devices.
+	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
+	  to the host.
+
 config DRM_PANEL_JDI_R63452
 	tristate "JDI R63452 Full HD DSI panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JADARD_JD9365DA_H3) += panel-jadard-jd9365da-h3.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
+obj-$(CONFIG_DRM_PANEL_JDI_LPM102A188A) += panel-jdi-lpm102a188a.o
 obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
 obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
 obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o