Commit 2545625b authored by Chester Lin's avatar Chester Lin Committed by Linus Walleij

dt-bindings: pinctrl: add schema for NXP S32 SoCs

Add DT schema for the pinctrl driver of NXP S32 SoC family.
Signed-off-by: default avatarLarisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: default avatarGhennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
Signed-off-by: default avatarChester Lin <clin@suse.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230220023320.3499-2-clin@suse.comSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 00408f28
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright 2022 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP S32G2 pin controller
maintainers:
- Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
- Chester Lin <clin@suse.com>
description: |
S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
whose memory map is split into two regions:
SIUL2_0 @ 0x4009c000
SIUL2_1 @ 0x44010000
Every SIUL2 region has multiple register types, and here only MSCR and
IMCR registers need to be revealed for kernel to configure pinmux.
Please note that some register indexes are reserved in S32G2, such as
MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
properties:
compatible:
enum:
- nxp,s32g2-siul2-pinctrl
reg:
description: |
A list of MSCR/IMCR register regions to be reserved.
- MSCR (Multiplexed Signal Configuration Register)
An MSCR register can configure the associated pin as either a GPIO pin
or a function output pin depends on the selected signal source.
- IMCR (Input Multiplexed Signal Configuration Register)
An IMCR register can configure the associated pin as function input
pin depends on the selected signal source.
items:
- description: MSCR registers group 0 in SIUL2_0
- description: MSCR registers group 1 in SIUL2_1
- description: MSCR registers group 2 in SIUL2_1
- description: IMCR registers group 0 in SIUL2_0
- description: IMCR registers group 1 in SIUL2_1
- description: IMCR registers group 2 in SIUL2_1
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'-grp[0-9]$':
type: object
allOf:
- $ref: pinmux-node.yaml#
- $ref: pincfg-node.yaml#
description: |
Pinctrl node's client devices specify pin muxes using subnodes,
which in turn use the standard properties below.
properties:
bias-disable: true
bias-high-impedance: true
bias-pull-up: true
bias-pull-down: true
drive-open-drain: true
input-enable: true
output-enable: true
pinmux:
description: |
An integer array for representing pinmux configurations of
a device. Each integer consists of a PIN_ID and a 4-bit
selected signal source(SSS) as IOMUX setting, which is
calculated as: pinmux = (PIN_ID << 4 | SSS)
slew-rate:
description: Supported slew rate based on Fmax values (MHz)
enum: [83, 133, 150, 166, 208]
additionalProperties: false
required:
- compatible
- reg
additionalProperties: false
examples:
- |
pinctrl@4009c240 {
compatible = "nxp,s32g2-siul2-pinctrl";
/* MSCR0-MSCR101 registers on siul2_0 */
reg = <0x4009c240 0x198>,
/* MSCR112-MSCR122 registers on siul2_1 */
<0x44010400 0x2c>,
/* MSCR144-MSCR190 registers on siul2_1 */
<0x44010480 0xbc>,
/* IMCR0-IMCR83 registers on siul2_0 */
<0x4009ca40 0x150>,
/* IMCR119-IMCR397 registers on siul2_1 */
<0x44010c1c 0x45c>,
/* IMCR430-IMCR495 registers on siul2_1 */
<0x440110f8 0x108>;
llce-can0-pins {
llce-can0-grp0 {
pinmux = <0x2b0>;
input-enable;
slew-rate = <208>;
};
llce-can0-grp1 {
pinmux = <0x2c2>;
output-enable;
slew-rate = <208>;
};
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment