Merge branch 'topic/qcom' into for-linus

Documentation/ABI/testing/sysfs-platform-hidma-mgmt

+What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
+		/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Contains either 0 or 1 and indicates if the DMA channel is a
+		low priority (0) or high priority (1) channel.
+
+What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
+		/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Contains 0..15 and indicates the weight of the channel among
+		equal priority channels during round robin scheduling.
+
+What:		/sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
+		/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Contains the platform specific cycle value to wait after a
+		reset command is issued. If the value is chosen too short,
+		then the HW will issue a reset failure interrupt. The value
+		is platform specific and should not be changed without
+		consultance.
+
+What:		/sys/devices/platform/hidma-mgmt*/dma_channels
+		/sys/devices/platform/QCOM8060:*/dma_channels
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Contains the number of dma channels supported by one instance
+		of HIDMA hardware. The value may change from chip to chip.
+
+What:		/sys/devices/platform/hidma-mgmt*/hw_version_major
+		/sys/devices/platform/QCOM8060:*/hw_version_major
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Version number major for the hardware.
+
+What:		/sys/devices/platform/hidma-mgmt*/hw_version_minor
+		/sys/devices/platform/QCOM8060:*/hw_version_minor
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Version number minor for the hardware.
+
+What:		/sys/devices/platform/hidma-mgmt*/max_rd_xactions
+		/sys/devices/platform/QCOM8060:*/max_rd_xactions
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Contains a value between 0 and 31. Maximum number of
+		read transactions that can be issued back to back.
+		Choosing a higher number gives better performance but
+		can also cause performance reduction to other peripherals
+		sharing the same bus.
+
+What:		/sys/devices/platform/hidma-mgmt*/max_read_request
+		/sys/devices/platform/QCOM8060:*/max_read_request
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Size of each read request. The value needs to be a power
+		of two and can be between 128 and 1024.
+
+What:		/sys/devices/platform/hidma-mgmt*/max_wr_xactions
+		/sys/devices/platform/QCOM8060:*/max_wr_xactions
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Contains a value between 0 and 31. Maximum number of
+		write transactions that can be issued back to back.
+		Choosing a higher number gives better performance but
+		can also cause performance reduction to other peripherals
+		sharing the same bus.
+
+
+What:		/sys/devices/platform/hidma-mgmt*/max_write_request
+		/sys/devices/platform/QCOM8060:*/max_write_request
+Date:		Nov 2015
+KernelVersion:	4.4
+Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+		Size of each write request. The value needs to be a power
+		of two and can be between 128 and 1024.

Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt

+Qualcomm Technologies HIDMA Management interface
+
+Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
+memcpy and memset capabilities. It has been designed for virtualized
+environments.
+
+Each HIDMA HW instance consists of multiple DMA channels. These channels
+share the same bandwidth. The bandwidth utilization can be parititioned
+among channels based on the priority and weight assignments.
+
+There are only two priority levels and 15 weigh assignments possible.
+
+Other parameters here determine how much of the system bus this HIDMA
+instance can use like maximum read/write request and and number of bytes to
+read/write in a single burst.
+
+Main node required properties:
+- compatible: "qcom,hidma-mgmt-1.0";
+- reg: Address range for DMA device
+- dma-channels: Number of channels supported by this DMA controller.
+- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
+  occupy the bus for in a single transaction. A memcpy requested is
+  fragmented to multiples of this amount. This parameter is used while
+  writing into destination memory. Setting this value incorrectly can
+  starve other peripherals in the system.
+- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
+  occupy the bus for in a single transaction. A memcpy request is
+  fragmented to multiples of this amount. This parameter is used while
+  reading the source memory. Setting this value incorrectly can starve
+  other peripherals in the system.
+- max-write-transactions: This value is how many times a write burst is
+  applied back to back while writing to the destination before yielding
+  the bus.
+- max-read-transactions: This value is how many times a read burst is
+  applied back to back while reading the source before yielding the bus.
+- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
+  Once a reset is applied to the HW, HW starts a timer for reset operation
+  to confirm. If reset is not completed within this time, HW reports reset
+  failure.
+
+Sub-nodes:
+
+HIDMA has one or more DMA channels that are used to move data from one
+memory location to another.
+
+When the OS is not in control of the management interface (i.e. it's a guest),
+the channel nodes appear on their own, not under a management node.
+
+Required properties:
+- compatible: must contain "qcom,hidma-1.0"
+- reg: Addresses for the transfer and event channel
+- interrupts: Should contain the event interrupt
+- desc-count: Number of asynchronous requests this channel can handle
+- iommus: required a iommu node
+
+Example:
+
+Hypervisor OS configuration:
+
+	hidma-mgmt@f9984000 = {
+		compatible = "qcom,hidma-mgmt-1.0";
+		reg = <0xf9984000 0x15000>;
+		dma-channels = <6>;
+		max-write-burst-bytes = <1024>;
+		max-read-burst-bytes = <1024>;
+		max-write-transactions = <31>;
+		max-read-transactions = <31>;
+		channel-reset-timeout-cycles = <0x500>;
+
+		hidma_24: dma-controller@0x5c050000 {
+			compatible = "qcom,hidma-1.0";
+			reg = <0 0x5c050000 0x0 0x1000>,
+			      <0 0x5c0b0000 0x0 0x1000>;
+			interrupts = <0 389 0>;
+			desc-count = <10>;
+			iommus = <&system_mmu>;
+		};
+	};
+
+Guest OS configuration:
+
+	hidma_24: dma-controller@0x5c050000 {
+		compatible = "qcom,hidma-1.0";
+		reg = <0 0x5c050000 0x0 0x1000>,
+		      <0 0x5c0b0000 0x0 0x1000>;
+		interrupts = <0 389 0>;
+		desc-count = <10>;
+		iommus = <&system_mmu>;
+	};

drivers/dma/Kconfig

@@ -409,15 +409,6 @@ config PXA_DMA
 	  16 to 32 channels for peripheral to memory or memory to memory
 	  transfers.
 
-config QCOM_BAM_DMA
-	tristate "QCOM BAM DMA support"
-	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
-	select DMA_ENGINE
-	select DMA_VIRTUAL_CHANNELS
-	---help---
-	  Enable support for the QCOM BAM DMA controller.  This controller
-	  provides DMA capabilities for a variety of on-chip devices.
-
 config SIRF_DMA
 	tristate "CSR SiRFprimaII/SiRFmarco DMA support"
 	depends on ARCH_SIRF
@@ -540,6 +531,8 @@ config ZX_DMA
 # driver files
 source "drivers/dma/bestcomm/Kconfig"
 
+source "drivers/dma/qcom/Kconfig"
+
 source "drivers/dma/dw/Kconfig"
 
 source "drivers/dma/hsu/Kconfig"

drivers/dma/Makefile

@@ -52,7 +52,6 @@ obj-$(CONFIG_PCH_DMA) += pch_dma.o
 obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_PXA_DMA) += pxa_dma.o
-obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
 obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
@@ -67,4 +66,5 @@ obj-$(CONFIG_TI_EDMA) += edma.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
 
+obj-y += qcom/
 obj-y += xilinx/

drivers/dma/qcom/Kconfig

+config QCOM_BAM_DMA
+	tristate "QCOM BAM DMA support"
+	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	---help---
+	  Enable support for the QCOM BAM DMA controller.  This controller
+	  provides DMA capabilities for a variety of on-chip devices.
+
+config QCOM_HIDMA_MGMT
+	tristate "Qualcomm Technologies HIDMA Management support"
+	select DMA_ENGINE
+	help
+	  Enable support for the Qualcomm Technologies HIDMA Management.
+	  Each DMA device requires one management interface driver
+	  for basic initialization before QCOM_HIDMA channel driver can
+	  start managing the channels. In a virtualized environment,
+	  the guest OS would run QCOM_HIDMA channel driver and the
+	  host would run the QCOM_HIDMA_MGMT management driver.
+
+config QCOM_HIDMA
+	tristate "Qualcomm Technologies HIDMA Channel support"
+	select DMA_ENGINE
+	help
+	  Enable support for the Qualcomm Technologies HIDMA controller.
+	  The HIDMA controller supports optimized buffer copies
+	  (user to kernel, kernel to kernel, etc.).  It only supports
+	  memcpy interface. The core is not intended for general
+	  purpose slave DMA.

drivers/dma/qcom/Makefile

+obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
+obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
+hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o

drivers/dma/qcom_bam_dma.c → drivers/dma/qcom/bam_dma.c

@@ -49,13 +49,13 @@
 #include <linux/clk.h>
 #include <linux/dmaengine.h>
 
-#include "dmaengine.h"
-#include "virt-dma.h"
+#include "../dmaengine.h"
+#include "../virt-dma.h"
 
 struct bam_desc_hw {
-	u32 addr;		/* Buffer physical address */
-	u16 size;		/* Buffer size in bytes */
-	u16 flags;
+	__le32 addr;		/* Buffer physical address */
+	__le16 size;		/* Buffer size in bytes */
+	__le16 flags;
 };
 
 #define DESC_FLAG_INT BIT(15)
@@ -632,14 +632,15 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
 		unsigned int curr_offset = 0;
 
 		do {
-			desc->addr = sg_dma_address(sg) + curr_offset;
+			desc->addr = cpu_to_le32(sg_dma_address(sg) +
+						 curr_offset);
 
 			if (remainder > BAM_MAX_DATA_SIZE) {
-				desc->size = BAM_MAX_DATA_SIZE;
+				desc->size = cpu_to_le16(BAM_MAX_DATA_SIZE);
 				remainder -= BAM_MAX_DATA_SIZE;
 				curr_offset += BAM_MAX_DATA_SIZE;
 			} else {
-				desc->size = remainder;
+				desc->size = cpu_to_le16(remainder);
 				remainder = 0;
 			}
 
@@ -915,9 +916,11 @@ static void bam_start_dma(struct bam_chan *bchan)
 
 	/* set any special flags on the last descriptor */
 	if (async_desc->num_desc == async_desc->xfer_len)
-		desc[async_desc->xfer_len - 1].flags = async_desc->flags;
+		desc[async_desc->xfer_len - 1].flags =
+					cpu_to_le16(async_desc->flags);
 	else
-		desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT;
+		desc[async_desc->xfer_len - 1].flags |=
+					cpu_to_le16(DESC_FLAG_INT);
 
 	if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
 		u32 partial = MAX_DESCRIPTORS - bchan->tail;

drivers/dma/qcom/hidma.h

+/*
+ * Qualcomm Technologies HIDMA data structures
+ *
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef QCOM_HIDMA_H
+#define QCOM_HIDMA_H
+
+#include <linux/kfifo.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+#define TRE_SIZE			32 /* each TRE is 32 bytes  */
+#define TRE_CFG_IDX			0
+#define TRE_LEN_IDX			1
+#define TRE_SRC_LOW_IDX		2
+#define TRE_SRC_HI_IDX			3
+#define TRE_DEST_LOW_IDX		4
+#define TRE_DEST_HI_IDX		5
+
+struct hidma_tx_status {
+	u8 err_info;			/* error record in this transfer    */
+	u8 err_code;			/* completion code		    */
+};
+
+struct hidma_tre {
+	atomic_t allocated;		/* if this channel is allocated	    */
+	bool queued;			/* flag whether this is pending     */
+	u16 status;			/* status			    */
+	u32 chidx;			/* index of the tre		    */
+	u32 dma_sig;			/* signature of the tre		    */
+	const char *dev_name;		/* name of the device		    */
+	void (*callback)(void *data);	/* requester callback		    */
+	void *data;			/* Data associated with this channel*/
+	struct hidma_lldev *lldev;	/* lldma device pointer		    */
+	u32 tre_local[TRE_SIZE / sizeof(u32) + 1]; /* TRE local copy        */
+	u32 tre_index;			/* the offset where this was written*/
+	u32 int_flags;			/* interrupt flags		    */
+};
+
+struct hidma_lldev {
+	bool initialized;		/* initialized flag               */
+	u8 trch_state;			/* trch_state of the device	  */
+	u8 evch_state;			/* evch_state of the device	  */
+	u8 chidx;			/* channel index in the core	  */
+	u32 nr_tres;			/* max number of configs          */
+	spinlock_t lock;		/* reentrancy                     */
+	struct hidma_tre *trepool;	/* trepool of user configs */
+	struct device *dev;		/* device			  */
+	void __iomem *trca;		/* Transfer Channel address       */
+	void __iomem *evca;		/* Event Channel address          */
+	struct hidma_tre
+		**pending_tre_list;	/* Pointers to pending TREs	  */
+	struct hidma_tx_status
+		*tx_status_list;	/* Pointers to pending TREs status*/
+	s32 pending_tre_count;		/* Number of TREs pending	  */
+
+	void *tre_ring;			/* TRE ring			  */
+	dma_addr_t tre_ring_handle;	/* TRE ring to be shared with HW  */
+	u32 tre_ring_size;		/* Byte size of the ring	  */
+	u32 tre_processed_off;		/* last processed TRE		  */
+
+	void *evre_ring;		/* EVRE ring			   */
+	dma_addr_t evre_ring_handle;	/* EVRE ring to be shared with HW  */
+	u32 evre_ring_size;		/* Byte size of the ring	   */
+	u32 evre_processed_off;		/* last processed EVRE		   */
+
+	u32 tre_write_offset;           /* TRE write location              */
+	struct tasklet_struct task;	/* task delivering notifications   */
+	DECLARE_KFIFO_PTR(handoff_fifo,
+		struct hidma_tre *);    /* pending TREs FIFO               */
+};
+
+struct hidma_desc {
+	struct dma_async_tx_descriptor	desc;
+	/* link list node for this channel*/
+	struct list_head		node;
+	u32				tre_ch;
+};
+
+struct hidma_chan {
+	bool				paused;
+	bool				allocated;
+	char				dbg_name[16];
+	u32				dma_sig;
+
+	/*
+	 * active descriptor on this channel
+	 * It is used by the DMA complete notification to
+	 * locate the descriptor that initiated the transfer.
+	 */
+	struct dentry			*debugfs;
+	struct dentry			*stats;
+	struct hidma_dev		*dmadev;
+	struct hidma_desc		*running;
+
+	struct dma_chan			chan;
+	struct list_head		free;
+	struct list_head		prepared;
+	struct list_head		active;
+	struct list_head		completed;
+
+	/* Lock for this structure */
+	spinlock_t			lock;
+};
+
+struct hidma_dev {
+	int				irq;
+	int				chidx;
+	u32				nr_descriptors;
+
+	struct hidma_lldev		*lldev;
+	void				__iomem *dev_trca;
+	struct resource			*trca_resource;
+	void				__iomem *dev_evca;
+	struct resource			*evca_resource;
+
+	/* used to protect the pending channel list*/
+	spinlock_t			lock;
+	struct dma_device		ddev;
+
+	struct dentry			*debugfs;
+	struct dentry			*stats;
+
+	/* Task delivering issue_pending */
+	struct tasklet_struct		task;
+};
+
+int hidma_ll_request(struct hidma_lldev *llhndl, u32 dev_id,
+			const char *dev_name,
+			void (*callback)(void *data), void *data, u32 *tre_ch);
+
+void hidma_ll_free(struct hidma_lldev *llhndl, u32 tre_ch);
+enum dma_status hidma_ll_status(struct hidma_lldev *llhndl, u32 tre_ch);
+bool hidma_ll_isenabled(struct hidma_lldev *llhndl);
+void hidma_ll_queue_request(struct hidma_lldev *llhndl, u32 tre_ch);
+void hidma_ll_start(struct hidma_lldev *llhndl);
+int hidma_ll_pause(struct hidma_lldev *llhndl);
+int hidma_ll_resume(struct hidma_lldev *llhndl);
+void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
+	dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+int hidma_ll_setup(struct hidma_lldev *lldev);
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
+			void __iomem *trca, void __iomem *evca,
+			u8 chidx);
+int hidma_ll_uninit(struct hidma_lldev *llhndl);
+irqreturn_t hidma_ll_inthandler(int irq, void *arg);
+void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
+				u8 err_code);
+#endif

drivers/dma/qcom/hidma_mgmt.c

+/*
+ * Qualcomm Technologies HIDMA DMA engine Management interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/bitops.h>
+
+#include "hidma_mgmt.h"
+
+#define HIDMA_QOS_N_OFFSET		0x300
+#define HIDMA_CFG_OFFSET		0x400
+#define HIDMA_MAX_BUS_REQ_LEN_OFFSET	0x41C
+#define HIDMA_MAX_XACTIONS_OFFSET	0x420
+#define HIDMA_HW_VERSION_OFFSET	0x424
+#define HIDMA_CHRESET_TIMEOUT_OFFSET	0x418
+
+#define HIDMA_MAX_WR_XACTIONS_MASK	GENMASK(4, 0)
+#define HIDMA_MAX_RD_XACTIONS_MASK	GENMASK(4, 0)
+#define HIDMA_WEIGHT_MASK		GENMASK(6, 0)
+#define HIDMA_MAX_BUS_REQ_LEN_MASK	GENMASK(15, 0)
+#define HIDMA_CHRESET_TIMEOUT_MASK	GENMASK(19, 0)
+
+#define HIDMA_MAX_WR_XACTIONS_BIT_POS	16
+#define HIDMA_MAX_BUS_WR_REQ_BIT_POS	16
+#define HIDMA_WRR_BIT_POS		8
+#define HIDMA_PRIORITY_BIT_POS		15
+
+#define HIDMA_AUTOSUSPEND_TIMEOUT	2000
+#define HIDMA_MAX_CHANNEL_WEIGHT	15
+
+int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev)
+{
+	unsigned int i;
+	u32 val;
+
+	if (!is_power_of_2(mgmtdev->max_write_request) ||
+	    (mgmtdev->max_write_request < 128) ||
+	    (mgmtdev->max_write_request > 1024)) {
+		dev_err(&mgmtdev->pdev->dev, "invalid write request %d\n",
+			mgmtdev->max_write_request);
+		return -EINVAL;
+	}
+
+	if (!is_power_of_2(mgmtdev->max_read_request) ||
+	    (mgmtdev->max_read_request < 128) ||
+	    (mgmtdev->max_read_request > 1024)) {
+		dev_err(&mgmtdev->pdev->dev, "invalid read request %d\n",
+			mgmtdev->max_read_request);
+		return -EINVAL;
+	}
+
+	if (mgmtdev->max_wr_xactions > HIDMA_MAX_WR_XACTIONS_MASK) {
+		dev_err(&mgmtdev->pdev->dev,
+			"max_wr_xactions cannot be bigger than %ld\n",
+			HIDMA_MAX_WR_XACTIONS_MASK);
+		return -EINVAL;
+	}
+
+	if (mgmtdev->max_rd_xactions > HIDMA_MAX_RD_XACTIONS_MASK) {
+		dev_err(&mgmtdev->pdev->dev,
+			"max_rd_xactions cannot be bigger than %ld\n",
+			HIDMA_MAX_RD_XACTIONS_MASK);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < mgmtdev->dma_channels; i++) {
+		if (mgmtdev->priority[i] > 1) {
+			dev_err(&mgmtdev->pdev->dev,
+				"priority can be 0 or 1\n");
+			return -EINVAL;
+		}
+
+		if (mgmtdev->weight[i] > HIDMA_MAX_CHANNEL_WEIGHT) {
+			dev_err(&mgmtdev->pdev->dev,
+				"max value of weight can be %d.\n",
+				HIDMA_MAX_CHANNEL_WEIGHT);
+			return -EINVAL;
+		}
+
+		/* weight needs to be at least one */
+		if (mgmtdev->weight[i] == 0)
+			mgmtdev->weight[i] = 1;
+	}
+
+	pm_runtime_get_sync(&mgmtdev->pdev->dev);
+	val = readl(mgmtdev->virtaddr + HIDMA_MAX_BUS_REQ_LEN_OFFSET);
+	val &= ~(HIDMA_MAX_BUS_REQ_LEN_MASK << HIDMA_MAX_BUS_WR_REQ_BIT_POS);
+	val |= mgmtdev->max_write_request << HIDMA_MAX_BUS_WR_REQ_BIT_POS;
+	val &= ~HIDMA_MAX_BUS_REQ_LEN_MASK;
+	val |= mgmtdev->max_read_request;
+	writel(val, mgmtdev->virtaddr + HIDMA_MAX_BUS_REQ_LEN_OFFSET);
+
+	val = readl(mgmtdev->virtaddr + HIDMA_MAX_XACTIONS_OFFSET);
+	val &= ~(HIDMA_MAX_WR_XACTIONS_MASK << HIDMA_MAX_WR_XACTIONS_BIT_POS);
+	val |= mgmtdev->max_wr_xactions << HIDMA_MAX_WR_XACTIONS_BIT_POS;
+	val &= ~HIDMA_MAX_RD_XACTIONS_MASK;
+	val |= mgmtdev->max_rd_xactions;
+	writel(val, mgmtdev->virtaddr + HIDMA_MAX_XACTIONS_OFFSET);
+
+	mgmtdev->hw_version =
+	    readl(mgmtdev->virtaddr + HIDMA_HW_VERSION_OFFSET);
+	mgmtdev->hw_version_major = (mgmtdev->hw_version >> 28) & 0xF;
+	mgmtdev->hw_version_minor = (mgmtdev->hw_version >> 16) & 0xF;
+
+	for (i = 0; i < mgmtdev->dma_channels; i++) {
+		u32 weight = mgmtdev->weight[i];
+		u32 priority = mgmtdev->priority[i];
+
+		val = readl(mgmtdev->virtaddr + HIDMA_QOS_N_OFFSET + (4 * i));
+		val &= ~(1 << HIDMA_PRIORITY_BIT_POS);
+		val |= (priority & 0x1) << HIDMA_PRIORITY_BIT_POS;
+		val &= ~(HIDMA_WEIGHT_MASK << HIDMA_WRR_BIT_POS);
+		val |= (weight & HIDMA_WEIGHT_MASK) << HIDMA_WRR_BIT_POS;
+		writel(val, mgmtdev->virtaddr + HIDMA_QOS_N_OFFSET + (4 * i));
+	}
+
+	val = readl(mgmtdev->virtaddr + HIDMA_CHRESET_TIMEOUT_OFFSET);
+	val &= ~HIDMA_CHRESET_TIMEOUT_MASK;
+	val |= mgmtdev->chreset_timeout_cycles & HIDMA_CHRESET_TIMEOUT_MASK;
+	writel(val, mgmtdev->virtaddr + HIDMA_CHRESET_TIMEOUT_OFFSET);
+
+	pm_runtime_mark_last_busy(&mgmtdev->pdev->dev);
+	pm_runtime_put_autosuspend(&mgmtdev->pdev->dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(hidma_mgmt_setup);
+
+static int hidma_mgmt_probe(struct platform_device *pdev)
+{
+	struct hidma_mgmt_dev *mgmtdev;
+	struct resource *res;
+	void __iomem *virtaddr;
+	int irq;
+	int rc;
+	u32 val;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	virtaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(virtaddr)) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "irq resources not found\n");
+		rc = irq;
+		goto out;
+	}
+
+	mgmtdev = devm_kzalloc(&pdev->dev, sizeof(*mgmtdev), GFP_KERNEL);
+	if (!mgmtdev) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	mgmtdev->pdev = pdev;
+	mgmtdev->addrsize = resource_size(res);
+	mgmtdev->virtaddr = virtaddr;
+
+	rc = device_property_read_u32(&pdev->dev, "dma-channels",
+				      &mgmtdev->dma_channels);
+	if (rc) {
+		dev_err(&pdev->dev, "number of channels missing\n");
+		goto out;
+	}
+
+	rc = device_property_read_u32(&pdev->dev,
+				      "channel-reset-timeout-cycles",
+				      &mgmtdev->chreset_timeout_cycles);
+	if (rc) {
+		dev_err(&pdev->dev, "channel reset timeout missing\n");
+		goto out;
+	}
+
+	rc = device_property_read_u32(&pdev->dev, "max-write-burst-bytes",
+				      &mgmtdev->max_write_request);
+	if (rc) {
+		dev_err(&pdev->dev, "max-write-burst-bytes missing\n");
+		goto out;
+	}
+
+	rc = device_property_read_u32(&pdev->dev, "max-read-burst-bytes",
+				      &mgmtdev->max_read_request);
+	if (rc) {
+		dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
+		goto out;
+	}
+
+	rc = device_property_read_u32(&pdev->dev, "max-write-transactions",
+				      &mgmtdev->max_wr_xactions);
+	if (rc) {
+		dev_err(&pdev->dev, "max-write-transactions missing\n");
+		goto out;
+	}
+
+	rc = device_property_read_u32(&pdev->dev, "max-read-transactions",
+				      &mgmtdev->max_rd_xactions);
+	if (rc) {
+		dev_err(&pdev->dev, "max-read-transactions missing\n");
+		goto out;
+	}
+
+	mgmtdev->priority = devm_kcalloc(&pdev->dev,
+					 mgmtdev->dma_channels,
+					 sizeof(*mgmtdev->priority),
+					 GFP_KERNEL);
+	if (!mgmtdev->priority) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	mgmtdev->weight = devm_kcalloc(&pdev->dev,
+				       mgmtdev->dma_channels,
+				       sizeof(*mgmtdev->weight), GFP_KERNEL);
+	if (!mgmtdev->weight) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	rc = hidma_mgmt_setup(mgmtdev);
+	if (rc) {
+		dev_err(&pdev->dev, "setup failed\n");
+		goto out;
+	}
+
+	/* start the HW */
+	val = readl(mgmtdev->virtaddr + HIDMA_CFG_OFFSET);
+	val |= 1;
+	writel(val, mgmtdev->virtaddr + HIDMA_CFG_OFFSET);
+
+	rc = hidma_mgmt_init_sys(mgmtdev);
+	if (rc) {
+		dev_err(&pdev->dev, "sysfs setup failed\n");
+		goto out;
+	}
+
+	dev_info(&pdev->dev,
+		 "HW rev: %d.%d @ %pa with %d physical channels\n",
+		 mgmtdev->hw_version_major, mgmtdev->hw_version_minor,
+		 &res->start, mgmtdev->dma_channels);
+
+	platform_set_drvdata(pdev, mgmtdev);
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+	return 0;
+out:
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return rc;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id hidma_mgmt_acpi_ids[] = {
+	{"QCOM8060"},
+	{},
+};
+#endif
+
+static const struct of_device_id hidma_mgmt_match[] = {
+	{.compatible = "qcom,hidma-mgmt-1.0",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, hidma_mgmt_match);
+
+static struct platform_driver hidma_mgmt_driver = {
+	.probe = hidma_mgmt_probe,
+	.driver = {
+		   .name = "hidma-mgmt",
+		   .of_match_table = hidma_mgmt_match,
+		   .acpi_match_table = ACPI_PTR(hidma_mgmt_acpi_ids),
+	},
+};
+
+module_platform_driver(hidma_mgmt_driver);
+MODULE_LICENSE("GPL v2");

drivers/dma/qcom/hidma_mgmt.h

+/*
+ * Qualcomm Technologies HIDMA Management common header
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+struct hidma_mgmt_dev {
+	u8 hw_version_major;
+	u8 hw_version_minor;
+
+	u32 max_wr_xactions;
+	u32 max_rd_xactions;
+	u32 max_write_request;
+	u32 max_read_request;
+	u32 dma_channels;
+	u32 chreset_timeout_cycles;
+	u32 hw_version;
+	u32 *priority;
+	u32 *weight;
+
+	/* Hardware device constants */
+	void __iomem *virtaddr;
+	resource_size_t addrsize;
+
+	struct kobject **chroots;
+	struct platform_device *pdev;
+};
+
+int hidma_mgmt_init_sys(struct hidma_mgmt_dev *dev);
+int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev);

drivers/dma/qcom/hidma_mgmt_sys.c

+/*
+ * Qualcomm Technologies HIDMA Management SYS interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include "hidma_mgmt.h"
+
+struct hidma_chan_attr {
+	struct hidma_mgmt_dev *mdev;
+	int index;
+	struct kobj_attribute attr;
+};
+
+struct hidma_mgmt_fileinfo {
+	char *name;
+	int mode;
+	int (*get)(struct hidma_mgmt_dev *mdev);
+	int (*set)(struct hidma_mgmt_dev *mdev, u64 val);
+};
+
+#define IMPLEMENT_GETSET(name)					\
+static int get_##name(struct hidma_mgmt_dev *mdev)		\
+{								\
+	return mdev->name;					\
+}								\
+static int set_##name(struct hidma_mgmt_dev *mdev, u64 val)	\
+{								\
+	u64 tmp;						\
+	int rc;							\
+								\
+	tmp = mdev->name;					\
+	mdev->name = val;					\
+	rc = hidma_mgmt_setup(mdev);				\
+	if (rc)							\
+		mdev->name = tmp;				\
+	return rc;						\
+}
+
+#define DECLARE_ATTRIBUTE(name, mode)				\
+	{#name, mode, get_##name, set_##name}
+
+IMPLEMENT_GETSET(hw_version_major)
+IMPLEMENT_GETSET(hw_version_minor)
+IMPLEMENT_GETSET(max_wr_xactions)
+IMPLEMENT_GETSET(max_rd_xactions)
+IMPLEMENT_GETSET(max_write_request)
+IMPLEMENT_GETSET(max_read_request)
+IMPLEMENT_GETSET(dma_channels)
+IMPLEMENT_GETSET(chreset_timeout_cycles)
+
+static int set_priority(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
+{
+	u64 tmp;
+	int rc;
+
+	if (i >= mdev->dma_channels)
+		return -EINVAL;
+
+	tmp = mdev->priority[i];
+	mdev->priority[i] = val;
+	rc = hidma_mgmt_setup(mdev);
+	if (rc)
+		mdev->priority[i] = tmp;
+	return rc;
+}
+
+static int set_weight(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
+{
+	u64 tmp;
+	int rc;
+
+	if (i >= mdev->dma_channels)
+		return -EINVAL;
+
+	tmp = mdev->weight[i];
+	mdev->weight[i] = val;
+	rc = hidma_mgmt_setup(mdev);
+	if (rc)
+		mdev->weight[i] = tmp;
+	return rc;
+}
+
+static struct hidma_mgmt_fileinfo hidma_mgmt_files[] = {
+	DECLARE_ATTRIBUTE(hw_version_major, S_IRUGO),
+	DECLARE_ATTRIBUTE(hw_version_minor, S_IRUGO),
+	DECLARE_ATTRIBUTE(dma_channels, S_IRUGO),
+	DECLARE_ATTRIBUTE(chreset_timeout_cycles, S_IRUGO),
+	DECLARE_ATTRIBUTE(max_wr_xactions, S_IRUGO),
+	DECLARE_ATTRIBUTE(max_rd_xactions, S_IRUGO),
+	DECLARE_ATTRIBUTE(max_write_request, S_IRUGO),
+	DECLARE_ATTRIBUTE(max_read_request, S_IRUGO),
+};
+
+static ssize_t show_values(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	buf[0] = 0;
+
+	for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+		if (strcmp(attr->attr.name, hidma_mgmt_files[i].name) == 0) {
+			sprintf(buf, "%d\n", hidma_mgmt_files[i].get(mdev));
+			break;
+		}
+	}
+	return strlen(buf);
+}
+
+static ssize_t set_values(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
+	unsigned long tmp;
+	unsigned int i;
+	int rc;
+
+	rc = kstrtoul(buf, 0, &tmp);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+		if (strcmp(attr->attr.name, hidma_mgmt_files[i].name) == 0) {
+			rc = hidma_mgmt_files[i].set(mdev, tmp);
+			if (rc)
+				return rc;
+
+			break;
+		}
+	}
+	return count;
+}
+
+static ssize_t show_values_channel(struct kobject *kobj,
+				   struct kobj_attribute *attr, char *buf)
+{
+	struct hidma_chan_attr *chattr;
+	struct hidma_mgmt_dev *mdev;
+
+	buf[0] = 0;
+	chattr = container_of(attr, struct hidma_chan_attr, attr);
+	mdev = chattr->mdev;
+	if (strcmp(attr->attr.name, "priority") == 0)
+		sprintf(buf, "%d\n", mdev->priority[chattr->index]);
+	else if (strcmp(attr->attr.name, "weight") == 0)
+		sprintf(buf, "%d\n", mdev->weight[chattr->index]);
+
+	return strlen(buf);
+}
+
+static ssize_t set_values_channel(struct kobject *kobj,
+				  struct kobj_attribute *attr, const char *buf,
+				  size_t count)
+{
+	struct hidma_chan_attr *chattr;
+	struct hidma_mgmt_dev *mdev;
+	unsigned long tmp;
+	int rc;
+
+	chattr = container_of(attr, struct hidma_chan_attr, attr);
+	mdev = chattr->mdev;
+
+	rc = kstrtoul(buf, 0, &tmp);
+	if (rc)
+		return rc;
+
+	if (strcmp(attr->attr.name, "priority") == 0) {
+		rc = set_priority(mdev, chattr->index, tmp);
+		if (rc)
+			return rc;
+	} else if (strcmp(attr->attr.name, "weight") == 0) {
+		rc = set_weight(mdev, chattr->index, tmp);
+		if (rc)
+			return rc;
+	}
+	return count;
+}
+
+static int create_sysfs_entry(struct hidma_mgmt_dev *dev, char *name, int mode)
+{
+	struct device_attribute *attrs;
+	char *name_copy;
+
+	attrs = devm_kmalloc(&dev->pdev->dev,
+			     sizeof(struct device_attribute), GFP_KERNEL);
+	if (!attrs)
+		return -ENOMEM;
+
+	name_copy = devm_kstrdup(&dev->pdev->dev, name, GFP_KERNEL);
+	if (!name_copy)
+		return -ENOMEM;
+
+	attrs->attr.name = name_copy;
+	attrs->attr.mode = mode;
+	attrs->show = show_values;
+	attrs->store = set_values;
+	sysfs_attr_init(&attrs->attr);
+
+	return device_create_file(&dev->pdev->dev, attrs);
+}
+
+static int create_sysfs_entry_channel(struct hidma_mgmt_dev *mdev, char *name,
+				      int mode, int index,
+				      struct kobject *parent)
+{
+	struct hidma_chan_attr *chattr;
+	char *name_copy;
+
+	chattr = devm_kmalloc(&mdev->pdev->dev, sizeof(*chattr), GFP_KERNEL);
+	if (!chattr)
+		return -ENOMEM;
+
+	name_copy = devm_kstrdup(&mdev->pdev->dev, name, GFP_KERNEL);
+	if (!name_copy)
+		return -ENOMEM;
+
+	chattr->mdev = mdev;
+	chattr->index = index;
+	chattr->attr.attr.name = name_copy;
+	chattr->attr.attr.mode = mode;
+	chattr->attr.show = show_values_channel;
+	chattr->attr.store = set_values_channel;
+	sysfs_attr_init(&chattr->attr.attr);
+
+	return sysfs_create_file(parent, &chattr->attr.attr);
+}
+
+int hidma_mgmt_init_sys(struct hidma_mgmt_dev *mdev)
+{
+	unsigned int i;
+	int rc;
+	int required;
+	struct kobject *chanops;
+
+	required = sizeof(*mdev->chroots) * mdev->dma_channels;
+	mdev->chroots = devm_kmalloc(&mdev->pdev->dev, required, GFP_KERNEL);
+	if (!mdev->chroots)
+		return -ENOMEM;
+
+	chanops = kobject_create_and_add("chanops", &mdev->pdev->dev.kobj);
+	if (!chanops)
+		return -ENOMEM;
+
+	/* create each channel directory here */
+	for (i = 0; i < mdev->dma_channels; i++) {
+		char name[20];
+
+		snprintf(name, sizeof(name), "chan%d", i);
+		mdev->chroots[i] = kobject_create_and_add(name, chanops);
+		if (!mdev->chroots[i])
+			return -ENOMEM;
+	}
+
+	/* populate common parameters */
+	for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+		rc = create_sysfs_entry(mdev, hidma_mgmt_files[i].name,
+					hidma_mgmt_files[i].mode);
+		if (rc)
+			return rc;
+	}
+
+	/* populate parameters that are per channel */
+	for (i = 0; i < mdev->dma_channels; i++) {
+		rc = create_sysfs_entry_channel(mdev, "priority",
+						(S_IRUGO | S_IWUGO), i,
+						mdev->chroots[i]);
+		if (rc)
+			return rc;
+
+		rc = create_sysfs_entry_channel(mdev, "weight",
+						(S_IRUGO | S_IWUGO), i,
+						mdev->chroots[i]);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(hidma_mgmt_init_sys);