Commit 255d01af authored by Pierre Ossman's avatar Pierre Ossman

mmc: remove BYTEBLOCK capability

Remove the BYTEBLOCK capability and let the broken hosts fail the
requests with -EINVAL instead.
Signed-off-by: default avatarPierre Ossman <drzeus@drzeus.cx>
parent b146d26a
......@@ -834,7 +834,6 @@ static int __init at91_mci_probe(struct platform_device *pdev)
mmc->f_min = 375000;
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_BYTEBLOCK;
mmc->max_blk_size = 4095;
mmc->max_blk_count = mmc->max_req_size;
......
......@@ -963,7 +963,7 @@ static int imxmci_probe(struct platform_device *pdev)
mmc->f_min = 150000;
mmc->f_max = CLK_RATE/2;
mmc->ocr_avail = MMC_VDD_32_33;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_BYTEBLOCK;
mmc->caps = MMC_CAP_4_BIT_DATA;
/* MMC core transfer sizes tunable parameters */
mmc->max_hw_segs = 64;
......
......@@ -391,6 +391,14 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
WARN_ON(host->mrq != NULL);
if (mrq->data && (hweight32(mrq->data->blksz) > 1)) {
printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
mmc_hostname(mmc), mrq->data->blksz);
mrq->cmd->error = -EINVAL;
mmc_request_done(mmc, mrq);
return;
}
spin_lock_irq(&host->lock);
host->mrq = mrq;
......
......@@ -1309,7 +1309,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
......
......@@ -626,14 +626,21 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
spin_lock_irqsave(&sock->lock, flags);
if (host->eject) {
spin_unlock_irqrestore(&sock->lock, flags);
mrq->cmd->error = -ENOMEDIUM;
goto err_out;
}
if (host->req) {
printk(KERN_ERR "%s : unfinished request detected\n",
sock->dev.bus_id);
spin_unlock_irqrestore(&sock->lock, flags);
mrq->cmd->error = -ETIMEDOUT;
goto err_out;
}
if (mrq->data && (hweight32(mrq->data->blksz) > 1)) {
printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
sock->dev.bus_id, mrq->data->blksz);
mrq->cmd->error = -EINVAL;
goto err_out;
}
......@@ -722,7 +729,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
return;
err_out:
mrq->cmd->error = -ETIMEDOUT;
spin_unlock_irqrestore(&sock->lock, flags);
mmc_request_done(mmc, mrq);
}
......
......@@ -1219,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev)
mmc->f_min = 375000;
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
spin_lock_init(&host->lock);
......
......@@ -87,9 +87,8 @@ struct mmc_host {
#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
#define MMC_CAP_MULTIWRITE (1 << 1) /* Can accurately report bytes sent to card on error */
#define MMC_CAP_BYTEBLOCK (1 << 2) /* Can do non-log2 block sizes */
#define MMC_CAP_MMC_HIGHSPEED (1 << 3) /* Can do MMC high-speed timing */
#define MMC_CAP_SD_HIGHSPEED (1 << 4) /* Can do SD high-speed timing */
#define MMC_CAP_MMC_HIGHSPEED (1 << 2) /* Can do MMC high-speed timing */
#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment