Commit 25cd2882 authored by Sarah Sharp's avatar Sarah Sharp

usb/xhci: Change how we indicate a host supports Link PM.

The xHCI driver currently uses a USB core internal field,
udev->lpm_capable, to indicate the xHCI driver knows how to calculate
the LPM timeout values.  If this value is set for the host controller
udev, it means Link PM can be enabled for child devices under that host.

Change the code so the xHCI driver isn't mucking with USB core internal
fields.  Instead, indicate the xHCI driver doesn't support Link PM on
this host by clearing the U1 and U2 exit latencies in the roothub
SuperSpeed Extended Capabilities BOS descriptor.

The code to check for the roothub setting U1 and U2 exit latencies to
zero will also disable LPM for external devices that do that same.  This
was already effectively done with commit
ae8963ad "usb: Don't enable LPM if the
exit latency is zero."  Leave that code in place, so that if a device
sets one exit latency value to zero, but the other is set to a valid
value, LPM is only enabled for the U1 or U2 state that had the valid
value.  This is the same behavior the code had before.

Also, change messages about missing Link PM information from warning
level to info level.  Only print a warning about the first device that
doesn't support LPM, to avoid log spam.  Further, cleanup some
unnecessary line breaks to help people to grep for the error messages.
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
parent 3c1b2c3e
...@@ -141,19 +141,27 @@ static int usb_device_supports_lpm(struct usb_device *udev) ...@@ -141,19 +141,27 @@ static int usb_device_supports_lpm(struct usb_device *udev)
return 0; return 0;
} }
/* All USB 3.0 must support LPM, but we need their max exit latency /*
* information from the SuperSpeed Extended Capabilities BOS descriptor. * According to the USB 3.0 spec, all USB 3.0 devices must support LPM.
* However, there are some that don't, and they set the U1/U2 exit
* latencies to zero.
*/ */
if (!udev->bos->ss_cap) { if (!udev->bos->ss_cap) {
dev_warn(&udev->dev, "No LPM exit latency info found. " dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n");
"Power management will be impacted.\n");
return 0; return 0;
} }
if (udev->parent->lpm_capable)
return 1;
dev_warn(&udev->dev, "Parent hub missing LPM exit latency info. " if (udev->bos->ss_cap->bU1devExitLat == 0 &&
"Power management will be impacted.\n"); udev->bos->ss_cap->bU2DevExitLat == 0) {
if (udev->parent)
dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n");
else
dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n");
return 0;
}
if (!udev->parent || udev->parent->lpm_capable)
return 1;
return 0; return 0;
} }
......
...@@ -732,9 +732,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, ...@@ -732,9 +732,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* Set the U1 and U2 exit latencies. */ /* Set the U1 and U2 exit latencies. */
memcpy(buf, &usb_bos_descriptor, memcpy(buf, &usb_bos_descriptor,
USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
temp = readl(&xhci->cap_regs->hcs_params3); if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
buf[12] = HCS_U1_LATENCY(temp); temp = readl(&xhci->cap_regs->hcs_params3);
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); buf[12] = HCS_U1_LATENCY(temp);
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
}
/* Indicate whether the host has LTM support. */ /* Indicate whether the host has LTM support. */
temp = readl(&xhci->cap_regs->hcc_params); temp = readl(&xhci->cap_regs->hcc_params);
......
...@@ -222,12 +222,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) ...@@ -222,12 +222,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto put_usb3_hcd; goto put_usb3_hcd;
/* Roothub already marked as USB 3.0 speed */ /* Roothub already marked as USB 3.0 speed */
/* We know the LPM timeout algorithms for this host, let the USB core
* enable and disable LPM for devices under the USB 3.0 roothub.
*/
if (xhci->quirks & XHCI_LPM_SUPPORT)
hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1;
return 0; return 0;
put_usb3_hcd: put_usb3_hcd:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment