Commit 25e5fb97 authored by Aurelien Jarno's avatar Aurelien Jarno Committed by Ralf Baechle

[MIPS] Add CFE support to BCM47XX

Add CFE support to the BCM47XX code.  That includes querying CFE environment
variables as well as using CFE to print messages before the serial port is
initialized (early printk).
Signed-off-by: default avatarAurelien Jarno <aurel32@farad.aurel32.net>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 2f56cfdd
...@@ -55,6 +55,8 @@ config BCM47XX ...@@ -55,6 +55,8 @@ config BCM47XX
select SSB select SSB
select SSB_DRIVER_MIPS select SSB_DRIVER_MIPS
select GENERIC_GPIO select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
help help
Support for BCM47XX based boards Support for BCM47XX based boards
......
/* /*
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the * under the terms of the GNU General Public License as published by the
...@@ -23,18 +24,117 @@ ...@@ -23,18 +24,117 @@
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <asm/fw/cfe/cfe_api.h>
#include <asm/fw/cfe/cfe_error.h>
static int cfe_cons_handle;
const char *get_system_type(void) const char *get_system_type(void)
{ {
return "Broadcom BCM47XX"; return "Broadcom BCM47XX";
} }
void __init prom_init(void) void prom_putchar(char c)
{
while (cfe_write(cfe_cons_handle, &c, 1) == 0)
;
}
static __init void prom_init_cfe(void)
{
uint32_t cfe_ept;
uint32_t cfe_handle;
uint32_t cfe_eptseal;
int argc = fw_arg0;
char **envp = (char **) fw_arg2;
int *prom_vec = (int *) fw_arg3;
/*
* Check if a loader was used; if NOT, the 4 arguments are
* what CFE gives us (handle, 0, EPT and EPTSEAL)
*/
if (argc < 0) {
cfe_handle = (uint32_t)argc;
cfe_ept = (uint32_t)envp;
cfe_eptseal = (uint32_t)prom_vec;
} else {
if ((int)prom_vec < 0) {
/*
* Old loader; all it gives us is the handle,
* so use the "known" entrypoint and assume
* the seal.
*/
cfe_handle = (uint32_t)prom_vec;
cfe_ept = 0xBFC00500;
cfe_eptseal = CFE_EPTSEAL;
} else {
/*
* Newer loaders bundle the handle/ept/eptseal
* Note: prom_vec is in the loader's useg
* which is still alive in the TLB.
*/
cfe_handle = prom_vec[0];
cfe_ept = prom_vec[2];
cfe_eptseal = prom_vec[3];
}
}
if (cfe_eptseal != CFE_EPTSEAL) {
/* too early for panic to do any good */
printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
while (1) ;
}
cfe_init(cfe_handle, cfe_ept);
}
static __init void prom_init_console(void)
{
/* Initialize CFE console */
cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
}
static __init void prom_init_cmdline(void)
{
char buf[CL_SIZE];
/* Get the kernel command line from CFE */
if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
buf[CL_SIZE-1] = 0;
strcpy(arcs_cmdline, buf);
}
/* Force a console handover by adding a console= argument if needed,
* as CFE is not available anymore later in the boot process. */
if ((strstr(arcs_cmdline, "console=")) == NULL) {
/* Try to read the default serial port used by CFE */
if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0)
|| (strncmp("uart", buf, 4)))
/* Default to uart0 */
strcpy(buf, "uart0");
/* Compute the new command line */
snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200",
arcs_cmdline, buf[4]);
}
}
static __init void prom_init_mem(void)
{ {
unsigned long mem; unsigned long mem;
/* Figure out memory size by finding aliases */ /* Figure out memory size by finding aliases.
*
* We should theoretically use the mapping from CFE using cfe_enummem().
* However as the BCM47XX is mostly used on low-memory systems, we
* want to reuse the memory used by CFE (around 4MB). That means cfe_*
* functions stop to work at some point during the boot, we should only
* call them at the beginning of the boot.
*/
for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
if (*(unsigned long *)((unsigned long)(prom_init) + mem) == if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
*(unsigned long *)(prom_init)) *(unsigned long *)(prom_init))
...@@ -44,6 +144,15 @@ void __init prom_init(void) ...@@ -44,6 +144,15 @@ void __init prom_init(void)
add_memory_region(0, mem, BOOT_MEM_RAM); add_memory_region(0, mem, BOOT_MEM_RAM);
} }
void __init prom_init(void)
{
prom_init_cfe();
prom_init_console();
prom_init_cmdline();
prom_init_mem();
}
void __init prom_free_prom_memory(void) void __init prom_free_prom_memory(void)
{ {
} }
...@@ -27,9 +27,11 @@ ...@@ -27,9 +27,11 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/ssb/ssb.h> #include <linux/ssb/ssb.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h> #include <asm/reboot.h>
#include <asm/time.h> #include <asm/time.h>
#include <bcm47xx.h> #include <bcm47xx.h>
#include <asm/fw/cfe/cfe_api.h>
struct ssb_bus ssb_bcm47xx; struct ssb_bus ssb_bcm47xx;
EXPORT_SYMBOL(ssb_bcm47xx); EXPORT_SYMBOL(ssb_bcm47xx);
...@@ -53,12 +55,55 @@ static void bcm47xx_machine_halt(void) ...@@ -53,12 +55,55 @@ static void bcm47xx_machine_halt(void)
cpu_relax(); cpu_relax();
} }
static void str2eaddr(char *str, char *dest)
{
int i = 0;
if (str == NULL) {
memset(dest, 0, 6);
return;
}
for (;;) {
dest[i++] = (char) simple_strtoul(str, NULL, 16);
str += 2;
if (!*str++ || i == 6)
break;
}
}
static int bcm47xx_get_invariants(struct ssb_bus *bus, static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv) struct ssb_init_invariants *iv)
{ {
/* TODO: fill ssb_init_invariants using boardtype/boardrev char buf[100];
* CFE environment variables.
*/ /* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
/* Fill sprom structure */
memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
iv->sprom.revision = 3;
if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.r1.et0mac);
if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.r1.et1mac);
if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.r1.et0phyaddr = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.r1.et1phyaddr = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.r1.et0mdcport = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.r1.et1mdcport = simple_strtoul(buf, NULL, 10);
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment