misc: (at24) move header to linux/platform_data/

This patch moves the at24.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.

It also fixes the following checkpatch warning:

    WARNING: please, no space before tabs
    #436: FILE: include/linux/platform_data/at24.h:31:
    + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

MAINTAINERS

@@ -1396,7 +1396,7 @@ M:	Wolfram Sang <wsa@the-dreams.de>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/eeprom/at24.c
-F:	include/linux/i2c/at24.h
+F:	include/linux/platform_data/at24.h
 
 ATA OVER ETHERNET (AOE) DRIVER
 M:	"Ed L. Cashin" <ecashin@coraid.com>

arch/arm/mach-at91/board-sam9260ek.c

@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 

arch/arm/mach-at91/board-sam9263ek.c

@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>

arch/arm/mach-davinci/board-da830-evm.c

@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>

arch/arm/mach-davinci/board-da850-evm.c

@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/input/tps6507x-ts.h>

arch/arm/mach-davinci/board-dm365-evm.c

@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -15,7 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/i2c/pcf857x.h>
 
 #include <media/tvp514x.h>

arch/arm/mach-davinci/board-mityomapl138.c

@@ -15,7 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>

arch/arm/mach-davinci/board-sffsdr.c

@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-imx/mach-pca100.c

@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>

arch/arm/mach-imx/mach-pcm037.c

@@ -23,7 +23,7 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/irq.h>

arch/arm/mach-imx/mach-pcm038.c

@@ -18,7 +18,7 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/io.h>
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-imx/mach-pcm043.c

@@ -24,7 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 

arch/arm/mach-imx/mach-vpr200.c

@@ -29,7 +29,7 @@
 #include <asm/mach/time.h>
 
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/mfd/mc13xxx.h>
 
 #include "common.h"

arch/arm/mach-kirkwood/lacie_v2-common.c

@@ -12,7 +12,7 @@
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/gpio.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>

arch/arm/mach-omap1/board-osk.c

@@ -300,7 +300,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 #include <linux/input.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 

arch/arm/mach-omap2/board-cm-t35.c

@@ -25,7 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

arch/arm/mach-omap2/board-h4.c

@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/input.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/arm/mach-omap2/board-omap3stalker.c

@@ -32,7 +32,7 @@
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-pxa/stargate2.c

@@ -27,7 +27,7 @@
 
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <linux/dm9000.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/platform_device.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>

drivers/misc/eeprom/at24.c

@@ -22,7 +22,7 @@
 #include <linux/jiffies.h>
 #include <linux/of.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 
 /*
  * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.

include/linux/i2c/at24.h → include/linux/platform_data/at24.h

@@ -28,7 +28,7 @@
  *
  * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
  * {
- * 	u8 *mac_addr = ethernet_pdata->mac_addr;
+ *	u8 *mac_addr = ethernet_pdata->mac_addr;
  *	off_t offset = context;
  *
  *	// Read MAC addr from EEPROM