Commit 2604faa7 authored by Mark Brown's avatar Mark Brown

ASoC: nau8822: add MCLK support

Merge series from Andrejs Cainikovs <andrejs.cainikovs@gmail.com>:

This change adds local MCLK handling, which would cover a case when a
reference audio clock is present in a system, but is not allowed to be
changed, see [1].

[1]: https://lore.kernel.org/all/ZfBdxrzX3EnPuGOn@ediswmail9.ad.cirrus.com/
parents eed13933 93f12a75
......@@ -14,6 +14,7 @@
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
......@@ -612,20 +613,6 @@ static const struct snd_soc_dapm_route nau8822_dapm_routes[] = {
{"Right DAC", NULL, "Digital Loopback"},
};
static int nau8822_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct snd_soc_component *component = dai->component;
struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component);
nau8822->div_id = clk_id;
nau8822->sysclk = freq;
dev_dbg(component->dev, "master sysclk %dHz, source %s\n", freq,
clk_id == NAU8822_CLK_PLL ? "PLL" : "MCLK");
return 0;
}
static int nau8822_calc_pll(unsigned int pll_in, unsigned int fs,
struct nau8822_pll *pll_param)
{
......@@ -782,6 +769,35 @@ static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
return 0;
}
static int nau8822_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct snd_soc_component *component = dai->component;
struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component);
unsigned long mclk_freq;
nau8822->div_id = clk_id;
nau8822->sysclk = freq;
if (nau8822->mclk) {
mclk_freq = clk_get_rate(nau8822->mclk);
if (mclk_freq != freq) {
int ret = nau8822_set_pll(dai, NAU8822_CLK_MCLK,
NAU8822_CLK_MCLK, mclk_freq, freq);
if (ret) {
dev_err(component->dev, "Failed to set PLL\n");
return ret;
}
nau8822->div_id = NAU8822_CLK_PLL;
}
}
dev_dbg(component->dev, "master sysclk %dHz, source %s\n", freq,
nau8822->div_id == NAU8822_CLK_PLL ? "PLL" : "MCLK");
return 0;
}
static int nau8822_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_component *component = dai->component;
......@@ -848,7 +864,7 @@ static int nau8822_hw_params(struct snd_pcm_substream *substream,
{
struct snd_soc_component *component = dai->component;
struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component);
int val_len = 0, val_rate = 0;
int div = 0, val_len = 0, val_rate = 0;
unsigned int ctrl_val, bclk_fs, bclk_div;
/* make BCLK and LRC divide configuration if the codec as master. */
......@@ -915,8 +931,10 @@ static int nau8822_hw_params(struct snd_pcm_substream *substream,
/* If the master clock is from MCLK, provide the runtime FS for driver
* to get the master clock prescaler configuration.
*/
if (nau8822->div_id == NAU8822_CLK_MCLK)
nau8822_config_clkdiv(dai, 0, params_rate(params));
if (nau8822->div_id != NAU8822_CLK_MCLK)
div = nau8822->pll.mclk_scaler;
nau8822_config_clkdiv(dai, div, params_rate(params));
return 0;
}
......@@ -940,15 +958,34 @@ static int nau8822_mute(struct snd_soc_dai *dai, int mute, int direction)
static int nau8822_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component);
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
if (nau8822->mclk &&
snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_ON) {
int ret = clk_prepare_enable(nau8822->mclk);
if (ret) {
dev_err(component->dev,
"Failed to enable MCLK: %d\n", ret);
return ret;
}
}
snd_soc_component_update_bits(component,
NAU8822_REG_POWER_MANAGEMENT_1,
NAU8822_REFIMP_MASK, NAU8822_REFIMP_80K);
break;
case SND_SOC_BIAS_STANDBY:
if (nau8822->mclk &&
snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_OFF)
clk_disable_unprepare(nau8822->mclk);
snd_soc_component_update_bits(component,
NAU8822_REG_POWER_MANAGEMENT_1,
NAU8822_IOBUF_EN | NAU8822_ABIAS_EN,
......@@ -1125,6 +1162,11 @@ static int nau8822_i2c_probe(struct i2c_client *i2c)
}
i2c_set_clientdata(i2c, nau8822);
nau8822->mclk = devm_clk_get_optional(&i2c->dev, "mclk");
if (IS_ERR(nau8822->mclk))
return dev_err_probe(&i2c->dev, PTR_ERR(nau8822->mclk),
"Error getting mclk\n");
nau8822->regmap = devm_regmap_init_i2c(i2c, &nau8822_regmap_config);
if (IS_ERR(nau8822->regmap)) {
ret = PTR_ERR(nau8822->regmap);
......
......@@ -215,6 +215,7 @@ struct nau8822_pll {
struct nau8822 {
struct device *dev;
struct regmap *regmap;
struct clk *mclk;
struct nau8822_pll pll;
int sysclk;
int div_id;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment