Commit 261e071a authored by Tomas Winkler's avatar Tomas Winkler Committed by Greg Kroah-Hartman

mei: abstract fw status register read.

This is to allow working with mei devices embedded within
another pci device, where mei device is represented
as a platform child device and fw status registers
are not necessarily resident in the device pci config space.

Bump the copyright year to 2019 on the modified files.
Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191106223841.15802-4-tomas.winkler@intel.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 261b3e1f
......@@ -183,20 +183,19 @@ static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg)
static int mei_me_fw_status(struct mei_device *dev,
struct mei_fw_status *fw_status)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
struct mei_me_hw *hw = to_me_hw(dev);
const struct mei_fw_status *fw_src = &hw->cfg->fw_status;
int ret;
int i;
if (!fw_status)
if (!fw_status || !hw->read_fws)
return -EINVAL;
fw_status->count = fw_src->count;
for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
ret = pci_read_config_dword(pdev, fw_src->status[i],
&fw_status->status[i]);
trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X",
ret = hw->read_fws(dev, fw_src->status[i],
&fw_status->status[i]);
trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_X",
fw_src->status[i],
fw_status->status[i]);
if (ret)
......@@ -210,19 +209,26 @@ static int mei_me_fw_status(struct mei_device *dev,
* mei_me_hw_config - configure hw dependent settings
*
* @dev: mei device
*
* Return:
* * -EINVAL when read_fws is not set
* * 0 on success
*
*/
static void mei_me_hw_config(struct mei_device *dev)
static int mei_me_hw_config(struct mei_device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
struct mei_me_hw *hw = to_me_hw(dev);
u32 hcsr, reg;
if (WARN_ON(!hw->read_fws))
return -EINVAL;
/* Doesn't change in runtime */
hcsr = mei_hcsr_read(dev);
hw->hbuf_depth = (hcsr & H_CBD) >> 24;
reg = 0;
pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
hw->read_fws(dev, PCI_CFG_HFS_1, &reg);
trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
hw->d0i3_supported =
((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK);
......@@ -233,6 +239,8 @@ static void mei_me_hw_config(struct mei_device *dev)
if (reg & H_D0I3C_I3)
hw->pg_state = MEI_PG_ON;
}
return 0;
}
/**
......
......@@ -46,6 +46,7 @@ struct mei_cfg {
* @pg_state: power gating state
* @d0i3_supported: di03 support
* @hbuf_depth: depth of hardware host/write buffer in slots
* @read_fws: read FW status register handler
*/
struct mei_me_hw {
const struct mei_cfg *cfg;
......@@ -54,6 +55,7 @@ struct mei_me_hw {
enum mei_pg_state pg_state;
bool d0i3_supported;
u8 hbuf_depth;
int (*read_fws)(const struct mei_device *dev, int where, u32 *val);
};
#define to_me_hw(dev) (struct mei_me_hw *)((dev)->hw)
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2013-2014, Intel Corporation. All rights reserved.
* Copyright (c) 2013-2019, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
......@@ -660,14 +660,16 @@ static int mei_txe_fw_status(struct mei_device *dev,
}
/**
* mei_txe_hw_config - configure hardware at the start of the devices
* mei_txe_hw_config - configure hardware at the start of the devices
*
* @dev: the device structure
*
* Configure hardware at the start of the device should be done only
* once at the device probe time
*
* Return: always 0
*/
static void mei_txe_hw_config(struct mei_device *dev)
static int mei_txe_hw_config(struct mei_device *dev)
{
struct mei_txe_hw *hw = to_txe_hw(dev);
......@@ -677,6 +679,8 @@ static void mei_txe_hw_config(struct mei_device *dev)
dev_dbg(dev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
hw->aliveness, hw->readiness);
return 0;
}
/**
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2012-2018, Intel Corporation. All rights reserved.
* Copyright (c) 2012-2019, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
......@@ -190,7 +190,9 @@ int mei_start(struct mei_device *dev)
/* acknowledge interrupt and stop interrupts */
mei_clear_interrupts(dev);
mei_hw_config(dev);
ret = mei_hw_config(dev);
if (ret)
goto err;
dev_dbg(dev->dev, "reset in start the mei device.\n");
......
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2003-2018, Intel Corporation. All rights reserved.
* Copyright (c) 2003-2019, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
......@@ -287,7 +287,7 @@ struct mei_hw_ops {
bool (*hw_is_ready)(struct mei_device *dev);
int (*hw_reset)(struct mei_device *dev, bool enable);
int (*hw_start)(struct mei_device *dev);
void (*hw_config)(struct mei_device *dev);
int (*hw_config)(struct mei_device *dev);
int (*fw_status)(struct mei_device *dev, struct mei_fw_status *fw_sts);
enum mei_pg_state (*pg_state)(struct mei_device *dev);
......@@ -614,9 +614,9 @@ void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list);
*/
static inline void mei_hw_config(struct mei_device *dev)
static inline int mei_hw_config(struct mei_device *dev)
{
dev->ops->hw_config(dev);
return dev->ops->hw_config(dev);
}
static inline enum mei_pg_state mei_pg_state(struct mei_device *dev)
......
......@@ -121,6 +121,13 @@ static inline void mei_me_set_pm_domain(struct mei_device *dev) {}
static inline void mei_me_unset_pm_domain(struct mei_device *dev) {}
#endif /* CONFIG_PM */
static int mei_me_read_fws(const struct mei_device *dev, int where, u32 *val)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
return pci_read_config_dword(pdev, where, val);
}
/**
* mei_me_quirk_probe - probe for devices that doesn't valid ME interface
*
......@@ -200,6 +207,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw = to_me_hw(dev);
hw->mem_addr = pcim_iomap_table(pdev)[0];
hw->irq = pdev->irq;
hw->read_fws = mei_me_read_fws;
pci_enable_msi(pdev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment