Commit 263b7fb5 authored by John Youn's avatar John Youn Committed by Felipe Balbi

usb: dwc2: Move reset into dwc2_get_hwparams()

The reset is required to get reset values of the hardware parameters but
the force mode is not. Move the base reset into dwc2_get_hwparams() and
do the reset and force mode afterwards.
Signed-off-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 1696d5ab
......@@ -3120,6 +3120,9 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
/**
* During device initialization, read various hardware configuration
* registers and interpret the contents.
*
* This should be called during driver probe. It will perform a core
* soft reset in order to get the reset values of the parameters.
*/
int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
{
......@@ -3128,6 +3131,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
u32 hptxfsiz, grxfsiz, gnptxfsiz;
u32 gusbcfg = 0;
int retval;
/*
* Attempt to ensure this device is really a DWC_otg Controller.
......@@ -3147,6 +3151,10 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
retval = dwc2_core_reset(hsotg);
if (retval)
return retval;
hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
......
......@@ -512,13 +512,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval)
return retval;
/*
* Reset before dwc2_get_hwparams() then it could get power-on real
* reset value form registers.
*/
dwc2_core_reset_and_force_dr_mode(hsotg);
/* Detect config values from hardware */
/* Reset the controller and detect hardware config values */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
......@@ -526,6 +520,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
/* Validate parameter values */
dwc2_set_parameters(hsotg, params);
dwc2_core_reset_and_force_dr_mode(hsotg);
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg, irq);
if (retval)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment