Merge branch 'phy-listing-link_topology-tracking'

Maxime Chevallier says:

====================
Introduce PHY listing and link_topology tracking

This is V11 for the link topology addition, allowing to track all PHYs
that are linked to netdevices.

This V11 addresses the various netlink-related issues that were raised
by Jakub, and fixes some typos in the documentation.

As a remainder, here's what the PHY listings would look like :
 - eth0 has a 88x3310 acting as media converter, and an SFP module with
   an embedded 88e1111 PHY
 - eth2 has a 88e1510 PHY

PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
PHY id: 0
Upstream type: MAC

PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
PHY id: 21040322
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0

PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
PHY id: 21040593
Upstream type: MAC

Ethtool patches : https://github.com/minimaxwell/ethtool/tree/link-topo-v6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/ethtool-netlink.rst

@@ -57,6 +57,7 @@ Structure of this header is
   ``ETHTOOL_A_HEADER_DEV_INDEX``  u32     device ifindex
   ``ETHTOOL_A_HEADER_DEV_NAME``   string  device name
   ``ETHTOOL_A_HEADER_FLAGS``      u32     flags common for all requests
+  ``ETHTOOL_A_HEADER_PHY_INDEX``  u32     phy device index
   ==============================  ======  =============================
 
 ``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
@@ -81,6 +82,12 @@ the behaviour is backward compatible, i.e. requests from old clients not aware
 of the flag should be interpreted the way the client expects. A client must
 not set flags it does not understand.
 
+``ETHTOOL_A_HEADER_PHY_INDEX`` identifies the Ethernet PHY the message relates to.
+As there are numerous commands that are related to PHY configuration, and because
+there may be more than one PHY on the link, the PHY index can be passed in the
+request for the commands that needs it. It is, however, not mandatory, and if it
+is not passed for commands that target a PHY, the net_device.phydev pointer
+is used.
 
 Bit sets
 ========

MAINTAINERS

@@ -8015,6 +8015,8 @@ F:	include/linux/mii.h
 F:	include/linux/of_net.h
 F:	include/linux/phy.h
 F:	include/linux/phy_fixed.h
+F:	include/linux/phy_link_topology.h
+F:	include/linux/phy_link_topology_core.h
 F:	include/linux/phylib_stubs.h
 F:	include/linux/platform_data/mdio-bcm-unimac.h
 F:	include/linux/platform_data/mdio-gpio.h

drivers/net/phy/Makefile

@@ -2,7 +2,7 @@
 # Makefile for Linux PHY drivers
 
 libphy-y			:= phy.o phy-c45.o phy-core.o phy_device.o \
-				   linkmode.o
+				   linkmode.o phy_link_topology.o
 mdio-bus-y			+= mdio_bus.o mdio_device.o
 
 ifdef CONFIG_MDIO_DEVICE

drivers/net/phy/marvell-88x2222.c

@@ -553,6 +553,8 @@ static const struct sfp_upstream_ops sfp_phy_ops = {
 	.link_down = mv2222_sfp_link_down,
 	.attach = phy_sfp_attach,
 	.detach = phy_sfp_detach,
+	.connect_phy = phy_sfp_connect_phy,
+	.disconnect_phy = phy_sfp_disconnect_phy,
 };
 
 static int mv2222_probe(struct phy_device *phydev)

drivers/net/phy/marvell.c

@@ -3550,6 +3550,8 @@ static const struct sfp_upstream_ops m88e1510_sfp_ops = {
 	.module_remove = m88e1510_sfp_remove,
 	.attach = phy_sfp_attach,
 	.detach = phy_sfp_detach,
+	.connect_phy = phy_sfp_connect_phy,
+	.disconnect_phy = phy_sfp_disconnect_phy,
 };
 
 static int m88e1510_probe(struct phy_device *phydev)

drivers/net/phy/marvell10g.c

@@ -503,6 +503,8 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 static const struct sfp_upstream_ops mv3310_sfp_ops = {
 	.attach = phy_sfp_attach,
 	.detach = phy_sfp_detach,
+	.connect_phy = phy_sfp_connect_phy,
+	.disconnect_phy = phy_sfp_disconnect_phy,
 	.module_insert = mv3310_sfp_insert,
 };
 

drivers/net/phy/phy_device.c

@@ -29,6 +29,7 @@
 #include <linux/phy.h>
 #include <linux/phylib_stubs.h>
 #include <linux/phy_led_triggers.h>
+#include <linux/phy_link_topology.h>
 #include <linux/pse-pd/pse.h>
 #include <linux/property.h>
 #include <linux/rtnetlink.h>
@@ -276,6 +277,14 @@ static void phy_mdio_device_remove(struct mdio_device *mdiodev)
 
 static struct phy_driver genphy_driver;
 
+static struct phy_link_topology *phy_get_link_topology(struct phy_device *phydev)
+{
+	if (phydev->attached_dev)
+		return phydev->attached_dev->link_topo;
+
+	return NULL;
+}
+
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
@@ -1369,6 +1378,46 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RO(phy_standalone);
 
+/**
+ * phy_sfp_connect_phy - Connect the SFP module's PHY to the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It adds the
+ * SFP module's phy to the phy namespace of the upstream phy
+ */
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy)
+{
+	struct phy_device *phydev = upstream;
+	struct phy_link_topology *topo = phy_get_link_topology(phydev);
+
+	if (topo)
+		return phy_link_topo_add_phy(topo, phy, PHY_UPSTREAM_PHY, phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_sfp_connect_phy);
+
+/**
+ * phy_sfp_disconnect_phy - Disconnect the SFP module's PHY from the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It removes the
+ * SFP module's phy to the phy namespace of the upstream phy. As the module phy
+ * will be destroyed, re-inserting the same module will add a new phy with a
+ * new index.
+ */
+void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy)
+{
+	struct phy_device *phydev = upstream;
+	struct phy_link_topology *topo = phy_get_link_topology(phydev);
+
+	if (topo)
+		phy_link_topo_del_phy(topo, phy);
+}
+EXPORT_SYMBOL(phy_sfp_disconnect_phy);
+
 /**
  * phy_sfp_attach - attach the SFP bus to the PHY upstream network device
  * @upstream: pointer to the phy device
@@ -1511,6 +1560,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 
 		if (phydev->sfp_bus_attached)
 			dev->sfp_bus = phydev->sfp_bus;
+
+		err = phy_link_topo_add_phy(dev->link_topo, phydev,
+					    PHY_UPSTREAM_MAC, dev);
+		if (err)
+			goto error;
 	}
 
 	/* Some Ethernet drivers try to connect to a PHY device before
@@ -1938,6 +1992,7 @@ void phy_detach(struct phy_device *phydev)
 	if (dev) {
 		phydev->attached_dev->phydev = NULL;
 		phydev->attached_dev = NULL;
+		phy_link_topo_del_phy(dev->link_topo, phydev);
 	}
 	phydev->phylink = NULL;
 

drivers/net/phy/phy_link_topology.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Infrastructure to handle all PHY devices connected to a given netdev,
+ * either directly or indirectly attached.
+ *
+ * Copyright (c) 2023 Maxime Chevallier<maxime.chevallier@bootlin.com>
+ */
+
+#include <linux/phy_link_topology.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/rtnetlink.h>
+#include <linux/xarray.h>
+
+struct phy_link_topology *phy_link_topo_create(struct net_device *dev)
+{
+	struct phy_link_topology *topo;
+
+	topo = kzalloc(sizeof(*topo), GFP_KERNEL);
+	if (!topo)
+		return ERR_PTR(-ENOMEM);
+
+	xa_init_flags(&topo->phys, XA_FLAGS_ALLOC1);
+	topo->next_phy_index = 1;
+
+	return topo;
+}
+
+void phy_link_topo_destroy(struct phy_link_topology *topo)
+{
+	if (!topo)
+		return;
+
+	xa_destroy(&topo->phys);
+	kfree(topo);
+}
+
+int phy_link_topo_add_phy(struct phy_link_topology *topo,
+			  struct phy_device *phy,
+			  enum phy_upstream upt, void *upstream)
+{
+	struct phy_device_node *pdn;
+	int ret;
+
+	pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
+	if (!pdn)
+		return -ENOMEM;
+
+	pdn->phy = phy;
+	switch (upt) {
+	case PHY_UPSTREAM_MAC:
+		pdn->upstream.netdev = (struct net_device *)upstream;
+		if (phy_on_sfp(phy))
+			pdn->parent_sfp_bus = pdn->upstream.netdev->sfp_bus;
+		break;
+	case PHY_UPSTREAM_PHY:
+		pdn->upstream.phydev = (struct phy_device *)upstream;
+		if (phy_on_sfp(phy))
+			pdn->parent_sfp_bus = pdn->upstream.phydev->sfp_bus;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+	pdn->upstream_type = upt;
+
+	/* Attempt to re-use a previously allocated phy_index */
+	if (phy->phyindex) {
+		ret = xa_insert(&topo->phys, phy->phyindex, pdn, GFP_KERNEL);
+
+		/* Errors could be either -ENOMEM or -EBUSY. If the phy has an
+		 * index, and there's another entry at the same index, this is
+		 * unexpected and we still error-out
+		 */
+		if (ret)
+			goto err;
+		return 0;
+	}
+
+	ret = xa_alloc_cyclic(&topo->phys, &phy->phyindex, pdn, xa_limit_32b,
+			      &topo->next_phy_index, GFP_KERNEL);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	kfree(pdn);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_link_topo_add_phy);
+
+void phy_link_topo_del_phy(struct phy_link_topology *topo,
+			   struct phy_device *phy)
+{
+	struct phy_device_node *pdn = xa_erase(&topo->phys, phy->phyindex);
+
+	/* We delete the PHY from the topology, however we don't re-set the
+	 * phy->phyindex field. If the PHY isn't gone, we can re-assign it the
+	 * same index next time it's added back to the topology
+	 */
+
+	kfree(pdn);
+}
+EXPORT_SYMBOL_GPL(phy_link_topo_del_phy);

drivers/net/phy/phylink.c

@@ -3408,7 +3408,8 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 	return ret;
 }
 
-static void phylink_sfp_disconnect_phy(void *upstream)
+static void phylink_sfp_disconnect_phy(void *upstream,
+				       struct phy_device *phydev)
 {
 	phylink_disconnect_phy(upstream);
 }

drivers/net/phy/qcom/at803x.c

@@ -770,6 +770,8 @@ static const struct sfp_upstream_ops at8031_sfp_ops = {
 	.attach = phy_sfp_attach,
 	.detach = phy_sfp_detach,
 	.module_insert = at8031_sfp_insert,
+	.connect_phy = phy_sfp_connect_phy,
+	.disconnect_phy = phy_sfp_disconnect_phy,
 };
 
 static int at8031_parse_dt(struct phy_device *phydev)

drivers/net/phy/qcom/qca807x.c

@@ -699,6 +699,8 @@ static const struct sfp_upstream_ops qca807x_sfp_ops = {
 	.detach = phy_sfp_detach,
 	.module_insert = qca807x_sfp_insert,
 	.module_remove = qca807x_sfp_remove,
+	.connect_phy = phy_sfp_connect_phy,
+	.disconnect_phy = phy_sfp_disconnect_phy,
 };
 
 static int qca807x_probe(struct phy_device *phydev)

drivers/net/phy/sfp-bus.c

@@ -486,7 +486,7 @@ static void sfp_unregister_bus(struct sfp_bus *bus)
 			bus->socket_ops->stop(bus->sfp);
 		bus->socket_ops->detach(bus->sfp);
 		if (bus->phydev && ops && ops->disconnect_phy)
-			ops->disconnect_phy(bus->upstream);
+			ops->disconnect_phy(bus->upstream, bus->phydev);
 	}
 	bus->registered = false;
 }
@@ -742,7 +742,7 @@ void sfp_remove_phy(struct sfp_bus *bus)
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
 
 	if (ops && ops->disconnect_phy)
-		ops->disconnect_phy(bus->upstream);
+		ops->disconnect_phy(bus->upstream, bus->phydev);
 	bus->phydev = NULL;
 }
 EXPORT_SYMBOL_GPL(sfp_remove_phy);
@@ -859,3 +859,14 @@ void sfp_unregister_socket(struct sfp_bus *bus)
 	sfp_bus_put(bus);
 }
 EXPORT_SYMBOL_GPL(sfp_unregister_socket);
+
+const char *sfp_get_name(struct sfp_bus *bus)
+{
+	ASSERT_RTNL();
+
+	if (bus->sfp_dev)
+		return dev_name(bus->sfp_dev);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(sfp_get_name);

include/linux/netdevice.h

@@ -40,7 +40,6 @@
 #include <net/dcbnl.h>
 #endif
 #include <net/netprio_cgroup.h>
-
 #include <linux/netdev_features.h>
 #include <linux/neighbour.h>
 #include <uapi/linux/netdevice.h>
@@ -52,6 +51,7 @@
 #include <net/net_trackers.h>
 #include <net/net_debug.h>
 #include <net/dropreason-core.h>
+#include <linux/phy_link_topology_core.h>
 
 struct netpoll_info;
 struct device;
@@ -1974,6 +1974,7 @@ enum netdev_reg_state {
  *	@fcoe_ddp_xid:	Max exchange id for FCoE LRO by ddp
  *
  *	@priomap:	XXX: need comments on this one
+ *	@link_topo:	Physical link topology tracking attached PHYs
  *	@phydev:	Physical device may attach itself
  *			for hardware timestamping
  *	@sfp_bus:	attached &struct sfp_bus structure.
@@ -2364,6 +2365,7 @@ struct net_device {
 #if IS_ENABLED(CONFIG_CGROUP_NET_PRIO)
 	struct netprio_map __rcu *priomap;
 #endif
+	struct phy_link_topology	*link_topo;
 	struct phy_device	*phydev;
 	struct sfp_bus		*sfp_bus;
 	struct lock_class_key	*qdisc_tx_busylock;

include/linux/phy.h

@@ -550,6 +550,9 @@ struct macsec_ops;
  * @drv: Pointer to the driver for this PHY instance
  * @devlink: Create a link between phy dev and mac dev, if the external phy
  *           used by current mac interface is managed by another mac interface.
+ * @phyindex: Unique id across the phy's parent tree of phys to address the PHY
+ *	      from userspace, similar to ifindex. A zero index means the PHY
+ *	      wasn't assigned an id yet.
  * @phy_id: UID for this device found during discovery
  * @c45_ids: 802.3-c45 Device Identifiers if is_c45.
  * @is_c45:  Set to true if this PHY uses clause 45 addressing.
@@ -650,6 +653,7 @@ struct phy_device {
 
 	struct device_link *devlink;
 
+	u32 phyindex;
 	u32 phy_id;
 
 	struct phy_c45_device_ids c45_ids;
@@ -1754,6 +1758,8 @@ int phy_suspend(struct phy_device *phydev);
 int phy_resume(struct phy_device *phydev);
 int __phy_resume(struct phy_device *phydev);
 int phy_loopback(struct phy_device *phydev, bool enable);
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy);
+void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy);
 void phy_sfp_attach(void *upstream, struct sfp_bus *bus);
 void phy_sfp_detach(void *upstream, struct sfp_bus *bus);
 int phy_sfp_probe(struct phy_device *phydev,

include/linux/phy_link_topology.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PHY device list allow maintaining a list of PHY devices that are
+ * part of a netdevice's link topology. PHYs can for example be chained,
+ * as is the case when using a PHY that exposes an SFP module, on which an
+ * SFP transceiver that embeds a PHY is connected.
+ *
+ * This list can then be used by userspace to leverage individual PHY
+ * capabilities.
+ */
+#ifndef __PHY_LINK_TOPOLOGY_H
+#define __PHY_LINK_TOPOLOGY_H
+
+#include <linux/ethtool.h>
+#include <linux/phy_link_topology_core.h>
+
+struct xarray;
+struct phy_device;
+struct net_device;
+struct sfp_bus;
+
+struct phy_device_node {
+	enum phy_upstream upstream_type;
+
+	union {
+		struct net_device	*netdev;
+		struct phy_device	*phydev;
+	} upstream;
+
+	struct sfp_bus *parent_sfp_bus;
+
+	struct phy_device *phy;
+};
+
+struct phy_link_topology {
+	struct xarray phys;
+	u32 next_phy_index;
+};
+
+static inline struct phy_device *
+phy_link_topo_get_phy(struct phy_link_topology *topo, u32 phyindex)
+{
+	struct phy_device_node *pdn = xa_load(&topo->phys, phyindex);
+
+	if (pdn)
+		return pdn->phy;
+
+	return NULL;
+}
+
+#if IS_REACHABLE(CONFIG_PHYLIB)
+int phy_link_topo_add_phy(struct phy_link_topology *topo,
+			  struct phy_device *phy,
+			  enum phy_upstream upt, void *upstream);
+
+void phy_link_topo_del_phy(struct phy_link_topology *lt, struct phy_device *phy);
+
+#else
+static inline int phy_link_topo_add_phy(struct phy_link_topology *topo,
+					struct phy_device *phy,
+					enum phy_upstream upt, void *upstream)
+{
+	return 0;
+}
+
+static inline void phy_link_topo_del_phy(struct phy_link_topology *topo,
+					 struct phy_device *phy)
+{
+}
+#endif
+
+#endif /* __PHY_LINK_TOPOLOGY_H */

include/linux/phy_link_topology_core.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PHY_LINK_TOPOLOGY_CORE_H
+#define __PHY_LINK_TOPOLOGY_CORE_H
+
+struct phy_link_topology;
+
+#if IS_REACHABLE(CONFIG_PHYLIB)
+
+struct phy_link_topology *phy_link_topo_create(struct net_device *dev);
+void phy_link_topo_destroy(struct phy_link_topology *topo);
+
+#else
+
+static inline struct phy_link_topology *phy_link_topo_create(struct net_device *dev)
+{
+	return NULL;
+}
+
+static inline void phy_link_topo_destroy(struct phy_link_topology *topo)
+{
+}
+
+#endif
+
+#endif /* __PHY_LINK_TOPOLOGY_CORE_H */

include/linux/sfp.h

@@ -544,7 +544,7 @@ struct sfp_upstream_ops {
 	void (*link_down)(void *priv);
 	void (*link_up)(void *priv);
 	int (*connect_phy)(void *priv, struct phy_device *);
-	void (*disconnect_phy)(void *priv);
+	void (*disconnect_phy)(void *priv, struct phy_device *);
 };
 
 #if IS_ENABLED(CONFIG_SFP)
@@ -570,6 +570,7 @@ struct sfp_bus *sfp_bus_find_fwnode(const struct fwnode_handle *fwnode);
 int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
 			 const struct sfp_upstream_ops *ops);
 void sfp_bus_del_upstream(struct sfp_bus *bus);
+const char *sfp_get_name(struct sfp_bus *bus);
 #else
 static inline int sfp_parse_port(struct sfp_bus *bus,
 				 const struct sfp_eeprom_id *id,
@@ -648,6 +649,11 @@ static inline int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
 static inline void sfp_bus_del_upstream(struct sfp_bus *bus)
 {
 }
+
+static inline const char *sfp_get_name(struct sfp_bus *bus)
+{
+	return NULL;
+}
 #endif
 
 #endif

include/uapi/linux/ethtool.h

@@ -2268,4 +2268,20 @@ struct ethtool_link_settings {
 	 * __u32 map_lp_advertising[link_mode_masks_nwords];
 	 */
 };
+
+/**
+ * enum phy_upstream - Represents the upstream component a given PHY device
+ * is connected to, as in what is on the other end of the MII bus. Most PHYs
+ * will be attached to an Ethernet MAC controller, but in some cases, there's
+ * an intermediate PHY used as a media-converter, which will driver another
+ * MII interface as its output.
+ * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port,
+ *		      or ethernet controller)
+ * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter)
+ */
+enum phy_upstream {
+	PHY_UPSTREAM_MAC,
+	PHY_UPSTREAM_PHY,
+};
+
 #endif /* _UAPI_LINUX_ETHTOOL_H */

include/uapi/linux/ethtool_netlink.h

@@ -132,6 +132,7 @@ enum {
 	ETHTOOL_A_HEADER_DEV_INDEX,		/* u32 */
 	ETHTOOL_A_HEADER_DEV_NAME,		/* string */
 	ETHTOOL_A_HEADER_FLAGS,			/* u32 - ETHTOOL_FLAG_* */
+	ETHTOOL_A_HEADER_PHY_INDEX,		/* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_HEADER_CNT,

net/core/dev.c

@@ -158,6 +158,7 @@
 #include <net/page_pool/types.h>
 #include <net/page_pool/helpers.h>
 #include <net/rps.h>
+#include <linux/phy_link_topology_core.h>
 
 #include "dev.h"
 #include "net-sysfs.h"
@@ -10962,6 +10963,12 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 #ifdef CONFIG_NET_SCHED
 	hash_init(dev->qdisc_hash);
 #endif
+	dev->link_topo = phy_link_topo_create(dev);
+	if (IS_ERR(dev->link_topo)) {
+		dev->link_topo = NULL;
+		goto free_all;
+	}
+
 	dev->priv_flags = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
 	setup(dev);
 
@@ -11050,6 +11057,8 @@ void free_netdev(struct net_device *dev)
 	free_percpu(dev->xdp_bulkq);
 	dev->xdp_bulkq = NULL;
 
+	phy_link_topo_destroy(dev->link_topo);
+
 	/*  Compatibility with error handling in drivers */
 	if (dev->reg_state == NETREG_UNINITIALIZED) {
 		netdev_freemem(dev);

net/ethtool/netlink.c

@@ -4,6 +4,7 @@
 #include <linux/ethtool_netlink.h>
 #include <linux/pm_runtime.h>
 #include "netlink.h"
+#include <linux/phy_link_topology.h>
 
 static struct genl_family ethtool_genl_family;
 
@@ -30,6 +31,24 @@ const struct nla_policy ethnl_header_policy_stats[] = {
 							  ETHTOOL_FLAGS_STATS),
 };
 
+const struct nla_policy ethnl_header_policy_phy[] = {
+	[ETHTOOL_A_HEADER_DEV_INDEX]	= { .type = NLA_U32 },
+	[ETHTOOL_A_HEADER_DEV_NAME]	= { .type = NLA_NUL_STRING,
+					    .len = ALTIFNAMSIZ - 1 },
+	[ETHTOOL_A_HEADER_FLAGS]	= NLA_POLICY_MASK(NLA_U32,
+							  ETHTOOL_FLAGS_BASIC),
+	[ETHTOOL_A_HEADER_PHY_INDEX]		= NLA_POLICY_MIN(NLA_U32, 1),
+};
+
+const struct nla_policy ethnl_header_policy_phy_stats[] = {
+	[ETHTOOL_A_HEADER_DEV_INDEX]	= { .type = NLA_U32 },
+	[ETHTOOL_A_HEADER_DEV_NAME]	= { .type = NLA_NUL_STRING,
+					    .len = ALTIFNAMSIZ - 1 },
+	[ETHTOOL_A_HEADER_FLAGS]	= NLA_POLICY_MASK(NLA_U32,
+							  ETHTOOL_FLAGS_STATS),
+	[ETHTOOL_A_HEADER_PHY_INDEX]		= NLA_POLICY_MIN(NLA_U32, 1),
+};
+
 int ethnl_ops_begin(struct net_device *dev)
 {
 	int ret;
@@ -89,8 +108,9 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
 			       const struct nlattr *header, struct net *net,
 			       struct netlink_ext_ack *extack, bool require_dev)
 {
-	struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy)];
+	struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy_phy)];
 	const struct nlattr *devname_attr;
+	struct phy_device *phydev = NULL;
 	struct net_device *dev = NULL;
 	u32 flags = 0;
 	int ret;
@@ -104,7 +124,7 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
 	/* No validation here, command policy should have a nested policy set
 	 * for the header, therefore validation should have already been done.
 	 */
-	ret = nla_parse_nested(tb, ARRAY_SIZE(ethnl_header_policy) - 1, header,
+	ret = nla_parse_nested(tb, ARRAY_SIZE(ethnl_header_policy_phy) - 1, header,
 			       NULL, extack);
 	if (ret < 0)
 		return ret;
@@ -145,6 +165,30 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
 		return -EINVAL;
 	}
 
+	if (dev) {
+		if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+			struct nlattr *phy_id;
+
+			phy_id = tb[ETHTOOL_A_HEADER_PHY_INDEX];
+			phydev = phy_link_topo_get_phy(dev->link_topo,
+						       nla_get_u32(phy_id));
+			if (!phydev) {
+				NL_SET_BAD_ATTR(extack, phy_id);
+				return -ENODEV;
+			}
+		} else {
+			/* If we need a PHY but no phy index is specified, fallback
+			 * to dev->phydev
+			 */
+			phydev = dev->phydev;
+		}
+	} else if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+		NL_SET_ERR_MSG_ATTR(extack, header,
+				    "can't target a PHY without a netdev");
+		return -EINVAL;
+	}
+
+	req_info->phydev = phydev;
 	req_info->dev = dev;
 	req_info->flags = flags;
 	return 0;

net/ethtool/netlink.h

@@ -250,6 +250,7 @@ static inline unsigned int ethnl_reply_header_size(void)
  * @dev:   network device the request is for (may be null)
  * @dev_tracker: refcount tracker for @dev reference
  * @flags: request flags common for all request types
+ * @phydev: phy_device connected to @dev this request is for (may be null)
  *
  * This is a common base for request specific structures holding data from
  * parsed userspace request. These always embed struct ethnl_req_info at
@@ -259,6 +260,7 @@ struct ethnl_req_info {
 	struct net_device	*dev;
 	netdevice_tracker	dev_tracker;
 	u32			flags;
+	struct phy_device	*phydev;
 };
 
 static inline void ethnl_parse_header_dev_put(struct ethnl_req_info *req_info)
@@ -395,9 +397,12 @@ extern const struct ethnl_request_ops ethnl_rss_request_ops;
 extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops;
 extern const struct ethnl_request_ops ethnl_plca_status_request_ops;
 extern const struct ethnl_request_ops ethnl_mm_request_ops;
+extern const struct ethnl_request_ops ethnl_phy_request_ops;
 
 extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
 extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
+extern const struct nla_policy ethnl_header_policy_phy[ETHTOOL_A_HEADER_PHY_INDEX + 1];
+extern const struct nla_policy ethnl_header_policy_phy_stats[ETHTOOL_A_HEADER_PHY_INDEX + 1];
 extern const struct nla_policy ethnl_strset_get_policy[ETHTOOL_A_STRSET_COUNTS_ONLY + 1];
 extern const struct nla_policy ethnl_linkinfo_get_policy[ETHTOOL_A_LINKINFO_HEADER + 1];
 extern const struct nla_policy ethnl_linkinfo_set_policy[ETHTOOL_A_LINKINFO_TP_MDIX_CTRL + 1];