Commit 268e97cc authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Linus Walleij

dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS

Add bidings for pin controller in Low Power Audio SubSystem (LPASS).
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230203174645.597053-1-krzysztof.kozlowski@linaro.orgSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 1c4e5c47
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SM8550 SoC LPASS LPI TLMM
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description:
Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
(LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC.
properties:
compatible:
const: qcom,sm8550-lpass-lpi-pinctrl
reg:
items:
- description: LPASS LPI TLMM Control and Status registers
- description: LPASS LPI pins SLEW registers
clocks:
items:
- description: LPASS Core voting clock
- description: LPASS Audio voting clock
clock-names:
items:
- const: core
- const: audio
gpio-controller: true
"#gpio-cells":
description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
gpio-ranges:
maxItems: 1
patternProperties:
"-state$":
oneOf:
- $ref: "#/$defs/qcom-sm8550-lpass-state"
- patternProperties:
"-pins$":
$ref: "#/$defs/qcom-sm8550-lpass-state"
additionalProperties: false
$defs:
qcom-sm8550-lpass-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: /schemas/pinctrl/pincfg-node.yaml
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
function:
enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
description:
Specify the alternative function to be configured for the specified
pins.
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
default: 2
description:
Selects the drive strength for the specified pins, in mA.
slew-rate:
enum: [0, 1, 2, 3]
default: 0
description: |
0: No adjustments
1: Higher Slew rate (faster edges)
2: Lower Slew rate (slower edges)
3: Reserved (No adjustments)
bias-pull-down: true
bias-pull-up: true
bias-disable: true
output-high: true
output-low: true
required:
- pins
- function
additionalProperties: false
allOf:
- $ref: pinctrl.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- gpio-controller
- "#gpio-cells"
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
lpass_tlmm: pinctrl@6e80000 {
compatible = "qcom,sm8550-lpass-lpi-pinctrl";
reg = <0x06e80000 0x20000>,
<0x0725a000 0x10000>;
clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&lpass_tlmm 0 0 23>;
tx-swr-sleep-clk-state {
pins = "gpio0";
function = "swr_tx_clk";
drive-strength = <2>;
bias-pull-down;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment