Commit 269cbcf7 authored by Fabrice Gasnier's avatar Fabrice Gasnier Committed by Greg Kroah-Hartman

usb: dwc2: drd: fix soft connect when gadget is unconfigured

When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
 new high-speed USB device number ...
 device descriptor read/64, error -110

Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
 - usb_gadget_connect
   - dwc2_hsotg_pullup
     - dwc2_hsotg_core_connect

Fixes: 17f93402 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: default avatarAmelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: default avatarMinas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: default avatarFabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 38ea1eac
...@@ -130,8 +130,10 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) ...@@ -130,8 +130,10 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
already = dwc2_ovr_avalid(hsotg, true); already = dwc2_ovr_avalid(hsotg, true);
} else if (role == USB_ROLE_DEVICE) { } else if (role == USB_ROLE_DEVICE) {
already = dwc2_ovr_bvalid(hsotg, true); already = dwc2_ovr_bvalid(hsotg, true);
/* This clear DCTL.SFTDISCON bit */ if (hsotg->enabled) {
dwc2_hsotg_core_connect(hsotg); /* This clear DCTL.SFTDISCON bit */
dwc2_hsotg_core_connect(hsotg);
}
} else { } else {
if (dwc2_is_device_mode(hsotg)) { if (dwc2_is_device_mode(hsotg)) {
if (!dwc2_ovr_bvalid(hsotg, false)) if (!dwc2_ovr_bvalid(hsotg, false))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment