Commit 27bce457 authored by James Hogan's avatar James Hogan Committed by Wolfram Sang

i2c: img-scb: Add Imagination Technologies I2C SCB driver

Add support for the IMG I2C Serial Control Bus (SCB) found on the
Pistachio and TZ1090 SoCs.
Reviewed-by: default avatarAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
[Ezequiel: code cleaning and rebasing]
Signed-off-by: default avatarEzequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 039e60ed
...@@ -524,6 +524,16 @@ config I2C_IBM_IIC ...@@ -524,6 +524,16 @@ config I2C_IBM_IIC
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called i2c-ibm_iic. will be called i2c-ibm_iic.
config I2C_IMG
tristate "Imagination Technologies I2C SCB Controller"
depends on SOC_TZ1090 || COMPILE_TEST
help
Say Y here if you want to use the IMG I2C SCB controller,
available on the TZ1090 SoC.
This driver can also be built as a module. If so, the module
will be called i2c-img-scb.
config I2C_IMX config I2C_IMX
tristate "IMX I2C interface" tristate "IMX I2C interface"
depends on ARCH_MXC depends on ARCH_MXC
......
...@@ -50,6 +50,7 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o ...@@ -50,6 +50,7 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMG) += i2c-img-scb.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment