Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

arch/arm/kernel/module.c

@@ -101,6 +101,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			break;
 
 		case R_ARM_PC24:
+		case R_ARM_CALL:
+		case R_ARM_JUMP24:
 			offset = (*(u32 *)loc & 0x00ffffff) << 2;
 			if (offset & 0x02000000)
 				offset -= 0x04000000;

arch/arm/mach-pxa/pm.c

@@ -155,19 +155,20 @@ int pxa_pm_enter(suspend_state_t state)
 	PSPR = 0;
 
 	/* restore registers */
+	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
+	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
-	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
 	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
 #ifdef CONFIG_PXA27x
 	RESTORE(MDREFR);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3);
-	RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+	RESTORE_GPLEVEL(3); RESTORE(GPDR3);
+	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
+	RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
 	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
 	RESTORE(PFER); RESTORE(PKWR);
 #endif

arch/ia64/kernel/process.c

@@ -721,11 +721,13 @@ flush_thread (void)
 	/* drop floating-point and debug-register state if it exists: */
 	current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
 	ia64_drop_fpu(current);
+#ifdef CONFIG_IA32_SUPPORT
 	if (IS_IA32_PROCESS(ia64_task_regs(current))) {
 		ia32_drop_partial_page_list(current);
 		current->thread.task_size = IA32_PAGE_OFFSET;
 		set_fs(USER_DS);
 	}
+#endif
 }
 
 /*

drivers/mmc/mmc.c

@@ -679,7 +679,15 @@ static void mmc_idle_cards(struct mmc_host *host)
 }
 
 /*
- * Apply power to the MMC stack.
+ * Apply power to the MMC stack.  This is a two-stage process.
+ * First, we enable power to the card without the clock running.
+ * We then wait a bit for the power to stabilise.  Finally,
+ * enable the bus drivers and clock to the card.
+ *
+ * We must _NOT_ enable the clock prior to power stablising.
+ *
+ * If a host does all the power sequencing itself, ignore the
+ * initial MMC_POWER_UP stage.
  */
 static void mmc_power_up(struct mmc_host *host)
 {

include/asm-arm/elf.h

@@ -22,6 +22,8 @@ typedef unsigned long elf_freg_t[3];
 #define R_ARM_NONE	0
 #define R_ARM_PC24	1
 #define R_ARM_ABS32	2
+#define R_ARM_CALL	28
+#define R_ARM_JUMP24	29
 
 #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];