Commit 283a72a5 authored by Petr Machata's avatar Petr Machata Committed by David S. Miller

nexthop: Add implementation of resilient next-hop groups

At this moment, there is only one type of next-hop group: an mpath group,
which implements the hash-threshold algorithm.

To select a next hop, hash-threshold algorithm first assigns a range of
hashes to each next hop in the group, and then selects the next hop by
comparing the SKB hash with the individual ranges. When a next hop is
removed from the group, the ranges are recomputed, which leads to
reassignment of parts of hash space from one next hop to another. While
there will usually be some overlap between the previous and the new
distribution, some traffic flows change the next hop that they resolve to.
That causes problems e.g. as established TCP connections are reset, because
the traffic is forwarded to a server that is not familiar with the
connection.

Resilient hashing is a technique to address the above problem. Resilient
next-hop group has another layer of indirection between the group itself
and its constituent next hops: a hash table. The selection algorithm uses a
straightforward modulo operation to choose a hash bucket, and then reads
the next hop that this bucket contains, and forwards traffic there.

This indirection brings an important feature. In the hash-threshold
algorithm, the range of hashes associated with a next hop must be
continuous. With a hash table, mapping between the hash table buckets and
the individual next hops is arbitrary. Therefore when a next hop is deleted
the buckets that held it are simply reassigned to other next hops. When
weights of next hops in a group are altered, it may be possible to choose a
subset of buckets that are currently not used for forwarding traffic, and
use those to satisfy the new next-hop distribution demands, keeping the
"busy" buckets intact. This way, established flows are ideally kept being
forwarded to the same endpoints through the same paths as before the
next-hop group change.

In a nutshell, the algorithm works as follows. Each next hop has a number
of buckets that it wants to have, according to its weight and the number of
buckets in the hash table. In case of an event that might cause bucket
allocation change, the numbers for individual next hops are updated,
similarly to how ranges are updated for mpath group next hops. Following
that, a new "upkeep" algorithm runs, and for idle buckets that belong to a
next hop that is currently occupying more buckets than it wants (it is
"overweight"), it migrates the buckets to one of the next hops that has
fewer buckets than it wants (it is "underweight"). If, after this, there
are still underweight next hops, another upkeep run is scheduled to a
future time.

Chances are there are not enough "idle" buckets to satisfy the new demands.
The algorithm has knobs to select both what it means for a bucket to be
idle, and for whether and when to forcefully migrate buckets if there keeps
being an insufficient number of idle buckets.

There are three users of the resilient data structures.

- The forwarding code accesses them under RCU, and does not modify them
  except for updating the time a selected bucket was last used.

- Netlink code, running under RTNL, which may modify the data.

- The delayed upkeep code, which may modify the data. This runs unlocked,
  and mutual exclusion between the RTNL code and the delayed upkeep is
  maintained by canceling the delayed work synchronously before the RTNL
  code touches anything. Later it restarts the delayed work if necessary.

The RTNL code has to implement next-hop group replacement, next hop
removal, etc. For removal, the mpath code uses a neat trick of having a
backup next hop group structure, doing the necessary changes offline, and
then RCU-swapping them in. However, the hash tables for resilient hashing
are about an order of magnitude larger than the groups themselves (the size
might be e.g. 4K entries), and it was felt that keeping two of them is an
overkill. Both the primary next-hop group and the spare therefore use the
same resilient table, and writers are careful to keep all references valid
for the forwarding code. The hash table references next-hop group entries
from the next-hop group that is currently in the primary role (i.e. not
spare). During the transition from primary to spare, the table references a
mix of both the primary group and the spare. When a next hop is deleted,
the corresponding buckets are not set to NULL, but instead marked as empty,
so that the pointer is valid and can be used by the forwarding code. The
buckets are then migrated to a new next-hop group entry during upkeep. The
only times that the hash table is invalid is the very beginning and very
end of its lifetime. Between those points, it is always kept valid.

This patch introduces the core support code itself. It does not handle
notifications towards drivers, which are kept as if the group were an mpath
one. It does not handle netlink either. The only bit currently exposed to
user space is the new next-hop group type, and that is currently bounced.
There is therefore no way to actually access this code.
Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 710ec562
......@@ -40,6 +40,12 @@ struct nh_config {
struct nlattr *nh_grp;
u16 nh_grp_type;
u16 nh_grp_res_num_buckets;
unsigned long nh_grp_res_idle_timer;
unsigned long nh_grp_res_unbalanced_timer;
bool nh_grp_res_has_num_buckets;
bool nh_grp_res_has_idle_timer;
bool nh_grp_res_has_unbalanced_timer;
struct nlattr *nh_encap;
u16 nh_encap_type;
......@@ -63,6 +69,32 @@ struct nh_info {
};
};
struct nh_res_bucket {
struct nh_grp_entry __rcu *nh_entry;
atomic_long_t used_time;
unsigned long migrated_time;
bool occupied;
u8 nh_flags;
};
struct nh_res_table {
struct net *net;
u32 nhg_id;
struct delayed_work upkeep_dw;
/* List of NHGEs that have too few buckets ("uw" for underweight).
* Reclaimed buckets will be given to entries in this list.
*/
struct list_head uw_nh_entries;
unsigned long unbalanced_since;
u32 idle_timer;
u32 unbalanced_timer;
u16 num_nh_buckets;
struct nh_res_bucket nh_buckets[];
};
struct nh_grp_entry {
struct nexthop *nh;
u8 weight;
......@@ -71,6 +103,13 @@ struct nh_grp_entry {
struct {
atomic_t upper_bound;
} mpath;
struct {
/* Member on uw_nh_entries. */
struct list_head uw_nh_entry;
u16 count_buckets;
u16 wants_buckets;
} res;
};
struct list_head nh_list;
......@@ -82,8 +121,11 @@ struct nh_group {
u16 num_nh;
bool is_multipath;
bool mpath;
bool resilient;
bool fdb_nh;
bool has_v4;
struct nh_res_table __rcu *res_table;
struct nh_grp_entry nh_entries[];
};
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment