Commit 284f5f9d authored by Bjorn Helgaas's avatar Bjorn Helgaas

PCI: work around Stratus ftServer broken PCIe hierarchy

A PCIe downstream port is a P2P bridge.  Its secondary interface is
a link that should lead only to device 0 (unless ARI is enabled)[1], so
we don't probe for non-zero device numbers.

Some Stratus ftServer systems have a PCIe downstream port (02:00.0) that
leads to both an upstream port (03:00.0) and a downstream port (03:01.0),
and 03:01.0 has important devices below it:

  [0000:02]-+-00.0-[03-3c]--+-00.0-[04-09]--...
                            \-01.0-[0a-0d]--+-[USB]
                                            +-[NIC]
                                            +-...

Previously, we didn't enumerate device 03:01.0, so USB and the network
didn't work.  This patch adds a DMI quirk to scan all device numbers,
not just 0, below a downstream port.

Based on a patch by Prarit Bhargava.

[1] PCIe spec r3.0, sec 7.3.1

CC: Myron Stowe <mstowe@redhat.com>
CC: Don Dutile <ddutile@redhat.com>
CC: James Paradis <james.paradis@stratus.com>
CC: Matthew Wilcox <matthew.r.wilcox@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent 66f75a5d
......@@ -2161,6 +2161,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
on: Turn realloc on
realloc same as realloc=on
noari do not use PCIe ARI.
pcie_scan_all Scan all possible PCIe devices. Otherwise we
only look for one device below a PCIe downstream
port.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
......
......@@ -11,6 +11,7 @@
#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm-generic/pci-bridge.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
......@@ -229,6 +230,14 @@ static int __devinit assign_all_busses(const struct dmi_system_id *d)
}
#endif
static int __devinit set_scan_all(const struct dmi_system_id *d)
{
printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
d->ident);
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
return 0;
}
static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
#ifdef __i386__
/*
......@@ -420,6 +429,13 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
},
},
{
.callback = set_scan_all,
.ident = "Stratus/NEC ftServer",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ftServer"),
},
},
{}
};
......
......@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <asm-generic/pci-bridge.h>
#include <asm/setup.h>
#include "pci.h"
......@@ -3893,6 +3894,8 @@ static int __init pci_setup(char *str)
pcie_bus_config = PCIE_BUS_PERFORMANCE;
} else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
pcie_bus_config = PCIE_BUS_PEER2PEER;
} else if (!strncmp(str, "pcie_scan_all", 13)) {
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
......
......@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/pci-aspm.h>
#include <asm-generic/pci-bridge.h>
#include "pci.h"
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
......@@ -1395,10 +1396,13 @@ static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
static int only_one_child(struct pci_bus *bus)
{
struct pci_dev *parent = bus->self;
if (!parent || !pci_is_pcie(parent))
return 0;
if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
return 1;
if (parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM &&
!pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
return 1;
return 0;
}
......
......@@ -30,6 +30,12 @@ enum {
PCI_ENABLE_PROC_DOMAINS = 0x00000010,
/* ... except for domain 0 */
PCI_COMPAT_DOMAIN_0 = 0x00000020,
/* PCIe downstream ports are bridges that normally lead to only a
* device 0, but if this is set, we scan all possible devices, not
* just device 0.
*/
PCI_SCAN_ALL_PCIE_DEVS = 0x00000040,
};
#ifdef CONFIG_PCI
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment