Merge branch 'dt/linus' into dt/next

Pull in DT binding warning fixes

Documentation/devicetree/bindings/gpio/sifive,gpio.yaml

@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive GPIO controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 
 properties:

Documentation/devicetree/bindings/mfd/brcm,cru.yaml

@@ -39,7 +39,7 @@ patternProperties:
   '^phy@[a-f0-9]+$':
     $ref: ../phy/bcm-ns-usb2-phy.yaml
 
-  '^pin-controller@[a-f0-9]+$':
+  '^pinctrl@[a-f0-9]+$':
     $ref: ../pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
@@ -94,7 +94,7 @@ examples:
             reg = <0x180 0x4>;
         };
 
-        pin-controller@1c0 {
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml

@@ -126,7 +126,7 @@ properties:
       clock-frequency:
         const: 12288000
 
-  lochnagar-pinctrl:
+  pinctrl:
     type: object
     $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
 
@@ -255,7 +255,7 @@ required:
   - reg
   - reset-gpios
   - lochnagar-clk
-  - lochnagar-pinctrl
+  - pinctrl
 
 additionalProperties: false
 
@@ -293,7 +293,7 @@ examples:
                 clock-frequency = <32768>;
             };
 
-            lochnagar-pinctrl {
+            pinctrl {
                 compatible = "cirrus,lochnagar-pinctrl";
 
                 gpio-controller;

Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml

@@ -20,7 +20,7 @@ description: |
 
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
-  - Roger Quadros <rogerq@ti.com
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml

@@ -8,7 +8,7 @@ title: OMAP USB2 PHY
 
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml

@@ -37,6 +37,12 @@ properties:
       max bit rate supported in bps
     minimum: 1
 
+  mux-states:
+    description:
+      mux controller node to route the signals from controller to
+      transceiver.
+    maxItems: 1
+
 required:
   - compatible
   - '#phy-cells'
@@ -53,4 +59,5 @@ examples:
       max-bitrate = <5000000>;
       standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
       enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>;
+      mux-states = <&mux0 1>;
     };

Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml

@@ -107,9 +107,6 @@ properties:
 
     additionalProperties: false
 
-allOf:
-  - $ref: "pinctrl.yaml#"
-
 required:
   - pinctrl-0
   - pinctrl-names

Documentation/devicetree/bindings/pwm/pwm-sifive.yaml

@@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive PWM controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -9,7 +9,6 @@ title: SiFive L2 Cache Controller
 
 maintainers:
   - Sagar Kadam <sagar.kadam@sifive.com>
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
 
 description:

Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml

@@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller
 
 maintainers:
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI Keystone Soc USB Controller
 
 maintainers:
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:

MAINTAINERS

@@ -7007,12 +7007,6 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/sb_edac.c
 
-EDAC-SIFIVE
-M:	Yash Shah <yash.shah@sifive.com>
-L:	linux-edac@vger.kernel.org
-S:	Supported
-F:	drivers/edac/sifive_edac.c
-
 EDAC-SKYLAKE
 M:	Tony Luck <tony.luck@intel.com>
 L:	linux-edac@vger.kernel.org

drivers/of/fdt.c

@@ -648,8 +648,8 @@ void __init early_init_fdt_scan_reserved_mem(void)
 	}
 
 	fdt_scan_reserved_mem();
-	fdt_init_reserved_mem();
 	fdt_reserve_elfcorehdr();
+	fdt_init_reserved_mem();
 }
 
 /**

drivers/of/unittest.c

@@ -513,24 +513,24 @@ static void __init of_unittest_parse_phandle_with_args(void)
 	memset(&args, 0, sizeof(args));
 
 	EXPECT_BEGIN(KERN_INFO,
-		     "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+		     "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1");
 
 	rc = of_parse_phandle_with_args(np, "phandle-list-bad-args",
 					"#phandle-cells", 1, &args);
 
 	EXPECT_END(KERN_INFO,
-		   "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+		   "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1");
 
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 
 	EXPECT_BEGIN(KERN_INFO,
-		     "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+		     "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1");
 
 	rc = of_count_phandle_with_args(np, "phandle-list-bad-args",
 					"#phandle-cells");
 
 	EXPECT_END(KERN_INFO,
-		   "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+		   "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1");
 
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 }
@@ -670,12 +670,12 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
 	memset(&args, 0, sizeof(args));
 
 	EXPECT_BEGIN(KERN_INFO,
-		     "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1");
+		     "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1");
 
 	rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args",
 					    "phandle", 1, &args);
 	EXPECT_END(KERN_INFO,
-		   "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1");
+		   "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1");
 
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 }
@@ -1257,12 +1257,12 @@ static void __init of_unittest_platform_populate(void)
 		unittest(pdev, "device 2 creation failed\n");
 
 		EXPECT_BEGIN(KERN_INFO,
-			     "platform testcase-data:testcase-device2: IRQ index 0 not found");
+			     "platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found");
 
 		irq = platform_get_irq(pdev, 0);
 
 		EXPECT_END(KERN_INFO,
-			   "platform testcase-data:testcase-device2: IRQ index 0 not found");
+			   "platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found");
 
 		unittest(irq < 0 && irq != -EPROBE_DEFER,
 			 "device parsing error failed - %d\n", irq);