Skip to content

L
linux
Commit 28bd6222 authored by Alexander Shishkin's avatar Alexander Shishkin Committed by Felipe Balbi
Browse files
Options

usb: gadget: langwell: drop langwell_otg support 

Since there is no working (or even compilable) OTG_TRANSCEIVER support
for this driver, remove the dead code which depends on it at compile
time.
Signed-off-by: default avatarAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v2.6.31+
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-usb@vger.kernel.org
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent c1084a56
Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 88 deletions
drivers/usb/gadget/langwell_udc.c
View file @ 28bd6222
......@@ -11,11 +11,6 @@
/* #undef DEBUG */
/* #undef VERBOSE_DEBUG */
#if defined(CONFIG_USB_LANGWELL_OTG)
#define OTG_TRANSCEIVER
#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
......@@ -2315,13 +2310,9 @@ static void handle_setup_packet(struct langwell_udc *dev,
if (!gadget_is_otg(&dev->gadget))
break;
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
dev->gadget.b_hnp_enable = 1;
#ifdef OTG_TRANSCEIVER
if (!dev->lotg->otg.default_a)
dev->lotg->hsm.b_hnp_enable = 1;
#endif
} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
dev->gadget.a_hnp_support = 1;
else if (setup->bRequest ==
USB_DEVICE_A_ALT_HNP_SUPPORT)
......@@ -2752,12 +2743,6 @@ static void handle_usb_reset(struct langwell_udc *dev)
dev->usb_state = USB_STATE_ATTACHED;
}
#ifdef OTG_TRANSCEIVER
/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
if (!dev->lotg->otg.default_a)
dev->lotg->hsm.b_hnp_enable = 0;
#endif
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
}
......@@ -2770,29 +2755,6 @@ static void handle_bus_suspend(struct langwell_udc *dev)
dev->resume_state = dev->usb_state;
dev->usb_state = USB_STATE_SUSPENDED;
#ifdef OTG_TRANSCEIVER
if (dev->lotg->otg.default_a) {
if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
dev->lotg->hsm.b_bus_suspend = 1;
/* notify transceiver the state changes */
if (spin_trylock(&dev->lotg->wq_lock)) {
langwell_update_transceiver();
spin_unlock(&dev->lotg->wq_lock);
}
}
dev->lotg->hsm.b_bus_suspend_vld++;
} else {
if (!dev->lotg->hsm.a_bus_suspend) {
dev->lotg->hsm.a_bus_suspend = 1;
/* notify transceiver the state changes */
if (spin_trylock(&dev->lotg->wq_lock)) {
langwell_update_transceiver();
spin_unlock(&dev->lotg->wq_lock);
}
}
}
#endif
/* report suspend to the driver */
if (dev->driver) {
if (dev->driver->suspend) {
......@@ -2823,11 +2785,6 @@ static void handle_bus_resume(struct langwell_udc *dev)
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
#ifdef OTG_TRANSCEIVER
if (dev->lotg->otg.default_a == 0)
dev->lotg->hsm.a_bus_suspend = 0;
#endif
/* report resume to the driver */
if (dev->driver) {
if (dev->driver->resume) {
......@@ -3020,7 +2977,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
dev->done = &done;
#ifndef OTG_TRANSCEIVER
/* free dTD dma_pool and dQH */
if (dev->dtd_pool)
dma_pool_destroy(dev->dtd_pool);
......@@ -3032,7 +2988,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
/* release SRAM caching */
if (dev->has_sram && dev->got_sram)
sram_deinit(dev);
#endif
if (dev->status_req) {
kfree(dev->status_req->req.buf);
......@@ -3045,7 +3000,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
if (dev->got_irq)
free_irq(pdev->irq, dev);
#ifndef OTG_TRANSCEIVER
if (dev->cap_regs)
iounmap(dev->cap_regs);
......@@ -3055,13 +3009,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
if (dev->enabled)
pci_disable_device(pdev);
#else
if (dev->transceiver) {
otg_put_transceiver(dev->transceiver);
dev->transceiver = NULL;
dev->lotg = NULL;
}
#endif
dev->cap_regs = NULL;
......@@ -3072,9 +3019,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
#ifndef OTG_TRANSCEIVER
pci_set_drvdata(pdev, NULL);
#endif
/* free dev, wait for the release() finished */
wait_for_completion(&done);
......@@ -3089,9 +3034,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct langwell_udc *dev;
#ifndef OTG_TRANSCEIVER
unsigned long resource, len;
#endif
void __iomem *base = NULL;
size_t size;
int retval;
......@@ -3109,16 +3052,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->pdev = pdev;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
#ifdef OTG_TRANSCEIVER
/* PCI device is already enabled by otg_transceiver driver */
dev->enabled = 1;
/* mem region and register base */
dev->region = 1;
dev->transceiver = otg_get_transceiver();
dev->lotg = otg_to_langwell(dev->transceiver);
base = dev->lotg->regs;
#else
pci_set_drvdata(pdev, dev);
/* now all the pci goodies ... */
......@@ -3139,7 +3072,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->region = 1;
base = ioremap_nocache(resource, len);
#endif
if (base == NULL) {
dev_err(&dev->pdev->dev, "can't map memory\n");
retval = -EFAULT;
......@@ -3163,7 +3095,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->got_sram = 0;
dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
#ifndef OTG_TRANSCEIVER
/* enable SRAM caching if detected */
if (dev->has_sram && !dev->got_sram)
sram_init(dev);
......@@ -3182,7 +3113,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
goto error;
}
dev->got_irq = 1;
#endif
/* set stopped bit */
dev->stopped = 1;
......@@ -3257,10 +3187,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->remote_wakeup = 0;
dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
#ifndef OTG_TRANSCEIVER
/* reset device controller */
langwell_udc_reset(dev);
#endif
/* initialize gadget structure */
dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
......@@ -3268,9 +3196,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */
#ifdef OTG_TRANSCEIVER
dev->gadget.is_otg = 1; /* support otg mode */
#endif
/* the "gadget" abstracts/virtualizes the controller */
dev_set_name(&dev->gadget.dev, "gadget");
......@@ -3282,10 +3207,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
/* controller endpoints reinit */
eps_reinit(dev);
#ifndef OTG_TRANSCEIVER
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
#endif
/* create dTD dma_pool resource */
dev->dtd_pool = dma_pool_create("langwell_dtd",
......@@ -3525,22 +3448,14 @@ static struct pci_driver langwell_pci_driver = {
static int __init init(void)
{
#ifdef OTG_TRANSCEIVER
return langwell_register_peripheral(&langwell_pci_driver);
#else
return pci_register_driver(&langwell_pci_driver);
#endif
}
module_init(init);
static void __exit cleanup(void)
{
#ifdef OTG_TRANSCEIVER
return langwell_unregister_peripheral(&langwell_pci_driver);
#else
pci_unregister_driver(&langwell_pci_driver);
#endif
}
module_exit(cleanup);
......
drivers/usb/gadget/langwell_udc.h
View file @ 28bd6222
......@@ -8,7 +8,6 @@
*/
#include <linux/usb/langwell_udc.h>
#include <linux/usb/langwell_otg.h>
/*-------------------------------------------------------------------------*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7